Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Removing oil from compressed air

Views: 2264

#72395

Removing oil from compressed air | 10 July, 2014

Can anyone recommend a top notch filter to remove oil from the compressed air lines. The filter will be placed before the machine. We have traps that catch .01 micron oil in the airline but it is still getting through to the machine.

Thanks, Bob

reply »

#72396

Removing oil from compressed air | 10 July, 2014

Use an oil free compressor ;). My UK based answer would be: We treat our air at point of use with a desiccant air dryer by Walker Filtration (this unit looks remarkably similar to units by Mark, Beko and others (especially the controller) this dryer unit was supplied with 3 filter modules, a coarse and a fine filter before the unit (XA and X1 models) and an RXA model after it to catch any crap that comes out of the dryer. I don't see a drop of water or oil in the traps located on the machine. So I would guess these filters and rivals equivalents do a fine job.

reply »

Benchtop Fluid Dispenser
High Precision Fluid Dispensers
Equipment Auction - Eagle Comtronics: Low-Use Electronic Assembly & Machining Facility 2019 Europlacer iineo + Placement Machine  Test & Inspection: Agilent | Tektronix | Mantis Machine Shop: Haas VF3 | Haas SL-20 | Mult. Lathes

SMT spare parts - Qinyi Electronics