hello people,
we have a my12 wich has a problem it gives the following error during hardware initialization: F-MOT-MSETDYN Y/1236 :Motor amplifier channel a error.
after this error it says hardware initialization failed.
this prevents us of using the machine at all.
we have this problem for several time now and the strange thing is sometimes it starts and works normaly and well it just works. we contacted mydata but the have had no usable solutions. we let a mechanic come over to sort it out but he couldnt find anything. so this forced us to keep the machine 24/7 on last months but during the holydays we turned of. since the hollydays we can do what we want but we keep getting the same error now.
its the motor ampifier from the ywagon, we checked everything changed the pcb (ymb ed-1b and cmot ed-2b) in the cabinet @ the rear we changed the relays wich didnt affect anything..
at this point mydata says we have to change the hole cabinet @ the rear with everything in it wich costs alot.
is there anyone who knows what this might me? only thing we can try now is a servo update/upgrade.
what we checked is:
-relays do not recieve any signal. (changed relays no effect).
-the led on the pcb (ymb ed-1b and cmot ed-2b on the bottom of the rear cabinet burns green and when initializing it goes to red flashing. (changed the pcb but same occurs).
-the cables are checked for bad connections in the cabinet.
-the maxplus flx gives and orange light wich means standby according to the manual and status code 2 wich means power on reset. And code - wich means its ok.
we checked the elmo servo amplifier for any visible malfunctions but nothing is found on the amplifier either. so @ this point we have 2 options:
- let half of the system get replaced (cabnet in the rear and de ywagon) so that the problem must be gone.
-try to find were the problem is and only swap that part.
and thats why i'm here can any of you give me advise or have you had the error yourself and do you have the solution?
regards Hans, the Netherlands
reply »