Mirtec MV-7 Cam

Subscribe to Thread

I have a vision problem because the cam is seeing blurry, bu... - Nov 04, 2011 by Zahari

Hi, On the camera itself you should have an adjustable lens... - Nov 04, 2011 by Evtimov

You should also have a backup calibration file to reinstall.... - Nov 04, 2011 by rem

I manually adjusted the hight..problem solved...MIRTEC Engin... - Nov 08, 2011 by Zahari

Zahari

#65362

Mirtec MV-7 Cam | 4 November, 2011

I have a vision problem because the cam is seeing blurry, but if i manually lift the board it's starting to see more clearly, how could i fix this focus problem?

reply »

Evtimov

#65364

Mirtec MV-7 Cam | 4 November, 2011

Hi, On the camera itself you should have an adjustable lens. You should be able to adjust it from there by hand. If you don't have it you should move camera up or down(I don't recommend that). the best thing is to see in your manuals if there is a way to calibrate the camera or call Mirtec and ask them how to do it. Good luck!

reply »

rem

#65365

Mirtec MV-7 Cam | 4 November, 2011

You should also have a backup calibration file to reinstall. If its software related this would put everything back to spec. Mechanically I would call Mirtec as well to ask the best method so that you dont have to reteach all your boards.

reply »

Zahari

#65390

Mirtec MV-7 Cam | 8 November, 2011

I manually adjusted the hight..problem solved...MIRTEC Engineer said that this is the easiest way

reply »