MPM Accuflex Camera not initializing

Subscribe to Thread

Just bought a used machine and everything was working fine a... - Feb 22, 2010 by rem

Probably the ribbon cable are broken. I had same issue some ... - Feb 25, 2010 by Meelis

Hello would you want to sell it? Harry ... - Feb 25, 2010 by Value Machine Sales

Unfortunately i am not a seller. I am ordering the part from... - Mar 02, 2010 by Meelis

Hi. It sounds like you may have the problem under control as... - Mar 02, 2010 by Keith Hansford

hi, check the home sensors if they are working specially ... - Mar 15, 2010 by smt_guy

rem

#61194

MPM Accuflex Camera not initializing | 22 February, 2010

Just bought a used machine and everything was working fine and now the camera will not initialize. Powered down completely and rebooted, same thing. I powered down again moved camera to center of axis, it moves to the lower right hand corner which I assume is a home position and fails to initialize still. Any recommendations?

reply »

Meelis

#61228

MPM Accuflex Camera not initializing | 25 February, 2010

Probably the ribbon cable are broken. I had same issue some time ago. Cable connected to camera and placed under cover. Spare part code is 1007867.

reply »

Value Machine Sales

#61237

MPM Accuflex Camera not initializing | 25 February, 2010

Hello would you want to sell it? Harry

reply »

Meelis

#61280

MPM Accuflex Camera not initializing | 2 March, 2010

Unfortunately i am not a seller. I am ordering the part from sincotron.eu I dont know your location but if you are in EU then contact them.

reply »

Keith Hansford

#61281

MPM Accuflex Camera not initializing | 2 March, 2010

Hi. It sounds like you may have the problem under control as you have ordered parts but if it still doesn't work please don't hesitate to contact us at sales@accuspares.com or visit our website http://www.accuspares.com. We should be able to help.....

reply »

smt_guy

#61365

MPM Accuflex Camera not initializing | 15 March, 2010

hi,

check the home sensors if they are working specially on the right side rail of the camera where you had the failure.

reply »