Glue on 0402 components

Subscribe to Thread

Hi there, I'm looking for some info on how to glue 0402 comp... - Nov 02, 2009 by Manuel

0402 will be glued on a fuji GL ... - Nov 03, 2009 by Manuel

We have never dispensed adhesive for 0402, but here's your r... - Nov 03, 2009 by davef

You can order the glue stencil at ... - Nov 24, 2009 by Heny

Manuel

#60270

Glue on 0402 components | 2 November, 2009

Hi there, I'm looking for some info on how to glue 0402 components... I wonder if you can share some info, I think is pretty hard and I want to know your experiences.

thanks!

reply »

Manuel

#60281

Glue on 0402 components | 3 November, 2009

0402 will be glued on a fuji GL

reply »

davef

#60284

Glue on 0402 components | 3 November, 2009

We have never dispensed adhesive for 0402, but here's your rules of thumb: * Nozzle diameter should be half the desired glue dot diameter. * Minimum of 0.010" gap between the adhesive and pad, both sides.

We'd guess that you should be using a 0.3mm nozzle

reply »

Heny

#60555

Glue on 0402 components | 24 November, 2009

You can order the glue stencil at http://www.usastencils.com They can design the opening of the apertures on the stencil in the middle of the caps so you can screen an adhesives through the opening then you will have it right on the center of the caps.

reply »