Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

X out marking

Views: 6851

Is there a standard (such as IPC) or common industry practic... - Aug 18, 2009 by Victor  

There is no standard. You need to decide when you want the c... - Aug 18, 2009 by davef  


Victor

#59551

X out marking | 18 August, 2009

Is there a standard (such as IPC) or common industry practice in regards with x-out marking on rejected boards of a panel?

Do board shops have to X-out both sides of the rejected board, or one side? If the answer is one side, which side should be marked?

reply »


davef

#59552

X out marking | 18 August, 2009

There is no standard. You need to decide when you want the cost of bad boards applied to your product cost.

Search the fine SMTnet Archives for previous discussions, like: http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=20871

reply »

ICT Total SMT line Provider
One stop service for all SMT and PCB needs
Now Online
88
Visitors
0
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

Fixate labor costs with selective soldering solutions
pcb potting
Solder Paste Dispensing

Equipment Auction - Eagle Comtronics: Low-Use Electronic Assembly & Machining Facility 2019 Europlacer iineo + Placement Machine Test & Inspection: Agilent | Tektronix | Mantis Machine Shop: Haas VF3 | Haas SL-20 | Mult. Lathes