Flexa

Subscribe to Thread

Hi all, What seems like a simple task is starting to bug ... - Jul 22, 2008 by aj

Hi AJ, I do not know flexa software but the CP4 machines ... - Jul 22, 2008 by jdengler

I would suggest calling Fuji and they can do a webex with yo... - Jul 22, 2008 by Mark M.

Hi, It doesnt seem to allow me to edit this. I have a... - Jul 22, 2008 by aj

I seem to be able to edit this under either program login or... - Jul 22, 2008 by Mark M.

0402 on CP643 is not that good.... We use the Fuji NXT for t... - Jul 22, 2008 by crashoveride

#55620

Flexa | 22 July, 2008

Hi all,

What seems like a simple task is starting to bug me!

I am trying to run trials for 0402 placement on my Fuji CP43 machine - at this moment and time I am struggling to remember how to change the nozzle config. from Flexa.

If some kind soul would like to point me in the right direction, I would be much obliged.

Thanks,

aj...

reply »

jdengler

#55621

Flexa | 22 July, 2008

Hi AJ,

I do not know flexa software but the CP4 machines have the nozzle sizes in the header of the placement program for MCS2.

Jerry

reply »

Mark M.

#55622

Flexa | 22 July, 2008

I would suggest calling Fuji and they can do a webex with you. But, if you wish to figure it out yourself here you go.

1.) Go into the program you wish to change. 2.) CP43 machine configuration 3.) Pick which holder you wish to change and a drop down will appear with all nozles that could possibly be used there. For example I have 012-010 and when I want to use a nozzle for the 0402 parts change to 012-007. 4.) Close that screen... optimize, generate and should be good to go.

Now I have worked on placement for 0402 with CP43 and they are not pretty. I have gottn told that the machines don't support 0402 cause the camera isnt really set for those. But, I have also heard from another company that they calibrate with 0402 placements. So good luck too you and let me know how it goes. Becuase, if there's anything I can change on my end for 0402 placement that would be great. Got your 0802 feeders? Make sure you change the part also to use the correct package style.

reply »

#55624

Flexa | 22 July, 2008

Hi,

It doesnt seem to allow me to edit this.

I have administrator access ?

reply »

Mark M.

#55629

Flexa | 22 July, 2008

I seem to be able to edit this under either program login or the operator. I guess it could be a access not setup right on your end. We are very open to operators edting thier own things here. I have some restrictions set but mostly they have alot of rights. Also try to login as Administrator and password Administrator

reply »

crashoveride

#55638

Flexa | 22 July, 2008

0402 on CP643 is not that good.... We use the Fuji NXT for this part. However, nozzle configuration can be edited thru machine configuration, nozzle set- up.

reply »