Volumetric Dispense Pump - PCD Technology revolutionizes how you dispense and how you perceive dispensing. PCD - Progressive Cavity Displacement PCD is a continuously volumetric dispense pump based on the Progressive Cavity principle. PCD technolog
ML-2500S PCB Separator uses high speed rotation milling cutter to separate PCB array. Widely applied in digital, communication, lighting, etc. Which improved the defect on PCB separating caused by manual, V-cut, stamping, etc If you have any questi
Hanwha Decan S1 SMT Pick And Place Machine ▶Speed : 47,000 CPH (Optimum) ▶Spindle/Gantry : 10 Spindles/1Gantry ▶Parts: 03015~55mm(H15),L75mm ▶Accuracy : ±28μm @ Cpk≥ 1.0/Chip ±30μm @ Cpk≥ 1.0/IC ▶Max.PCB : L510xW510 (Standard)
Fully Automatic SMT Stencil Cleaning System BMP-700S Feature ▶The cleaning tank, the original tank, and the spray tank are designed with liquid level sensor overflow alarm. ▶The opening of the front door is designed with photoelectric sensor protect
Fully Automatic SMT Stencil Cleaning System BMP-700S Feature ▶The cleaning tank, the original tank, and the spray tank are designed with liquid level sensor overflow alarm. ▶The opening of the front door is designed with photoelectric sensor protect
1.The top heater can move freely along the X, Y axis in the IR preheating area It is good for many BGA chips distribution at different positions in the PCB board which need repair X-shaped infrared laser can do rapid location After location the elect
3 independent control heaters top and bottom heaters are hot-air heating, the third IR (preheating area 350x260mm) is infrared heating, temperature accuracy within 3 degrees, the top and bottom heaters can setting 6 segments rising temperature and 6
Best High Volume Dispensing Systems for Silicone Adhesives and Sealants Programmable 2-Part Resins Mixing and Dispensing Machine CCD Vision dispensing system ,AB glue machine 2 Part Silicone plyurethane epoxy potting dispensing machine AB Resins comp
In the world of makers, people enjoy the fun of designing and developing hardware/ software, even final electronic products. They will not concentrate a lot on the cost and manufacturability. But it is quite different from lab to factory, when it com
| 1 |
