Electronics Forum | Fri Jun 26 19:59:07 EDT 1998 | Scott McKee
| can any body help on assembling straddle mount connectors on to a board? for information on the connector - it is a berg micropak connector 1. You need a fixture to insure the pins don't bend while inserting them on the board, coplanarity is a re
Electronics Forum | Fri Jun 12 16:21:59 EDT 1998 | krishnan
can any body help on assembling straddle mount connectors on to a board? for information on the connector - it is a berg micropak connector
Electronics Forum | Tue Jun 16 07:52:50 EDT 1998 | Jim Zanolli
| can any body help on assembling straddle mount connectors on to a board? for information on the connector - it is a berg micropak connector Teka Interconnection Systems (http://www.tekais.com)manufactures straddle mount connectors with solder and
Electronics Forum | Sat Jun 13 00:48:32 EDT 1998 | Scott McKee
| can any body help on assembling straddle mount connectors on to a board? for information on the connector - it is a berg micropak connector I just got my first contract with straddle mount connectors. I have a few ideas to try... Call me at 714-9
Electronics Forum | Mon Jun 15 10:53:27 EDT 1998 | Process Engineer
| can any body help on assembling straddle mount connectors on to a board? for information on the connector - it is a berg micropak connector Automated and/or hand assembly?? Inline/offline configuration. Paste on both sides of connector pads?? Onse
Electronics Forum | Thu Jul 08 13:21:18 EDT 1999 | Bob Barr
Ron, We use 100 pin straddle mount connectors on some of our 1.6mm boards (up to eight per board.) They come to us from the vendor with a bead of solder on the somewhat 'J' shaped leads. Our process is as follows: Mount connector to board with hard
Electronics Forum | Thu Jul 08 03:33:33 EDT 1999 | Ron Lahat
Do you have experience with reflow process of a straddle mount connector on a 1.6 mm PCB ? Connector have more than 200 pins What is the process ? Thanks
Electronics Forum | Sat Jul 10 01:45:45 EDT 1999 | Scott
| Do you have experience with reflow process of a straddle mount connector on a 1.6 mm PCB ? | Connector have more than 200 pins | | What is the process ? | | Thanks | Depends on the connector... For connectors that have pre-applied solder such as
Electronics Forum | Fri Sep 17 13:32:42 EDT 2010 | davidd1
AJ, I am the manager of Samtec's Interconnect Processing Group. The edge mount connector in question does present a set of unique assembly challenges but I am confident we can help you develop a process that fits your needs. Please contact our g
Electronics Forum | Tue Dec 28 09:36:34 EST 1999 | Dan Woodward
Certainly automatic placement, preferably with vision system assistance will yield a more repeatable process. Process repeatability (paste deposition, connector placement, reflow cycle, etc.) will be your key to success here. Another possibility yo
The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.
Training Provider / Events Organizer / Association / Non-Profit
6600 City W Pkwy
Eden Prairie, MN USA
Phone: 952-920-7682
