Gold embrittlement of solder joints has been a concern for many decades. SEM Lab, Inc. supports evaluation for this condition. Gold embrittlement can be avoided by careful solder joint design and knowledge of the causes of this condition. https://s
Industry News | 2021-04-13 17:37:07.0
Gold plating dissolves rapidly during soldering and can result in gold embrittlement. This tech paper examines how to re-condition electronic components prior to soldering.
Industry News | 2021-07-26 17:33:25.0
High thermal mass and fine-pitch components place increased demand on the selective soldering process. This tech paper outlines techniques that minizine these demands.
Technical Library | 2014-08-07 15:13:44.0
Gold embrittlement in SnPb solder is a well-known failure mechanism in electronic assembly. To avoid this issue, prior studies have indicated a maximum gold content of three weight percent. This study attempts to provide similar guidance for Pb-free (SAC305) solder. Standard surface mount devices were assembled with SnPb and SAC305 solder onto printed boards with various thicknesses of gold plating. The gold plating included electroless nickel immersion gold (ENIG) and electrolytic gold of 15, 25, 35, and 50 microinches over nickel. These gold thicknesses resulted in weight percentages between 0.4 to 7.0 weight percent.
Technical Library | 2013-01-17 15:34:33.0
The use of an electroless nickel, immersion gold (ENIG) surface finish comes with the inherent potential risk of Black Pad failures that can cause fracture embrittlement at the interface between the solder and the metal pad. As yet, there is no conclusive agreed solution to effectively eliminate Black Pad failures. The case studies presented are intended to add to the understanding of the Black Pad failure mechanism and to identify both the plating and the subsequent assembly processes and conditions that can help to prevent the likelihood of Black Pad occurring.
ACI Technologies Inc. (ACI) is a scientific research corporation dedicated to the advancement of electronics manufacturing processes and materials for The Department of Defense and industry. This video provides an overview of our commercial service
SMTnet Express, August 7, 2014, Subscribers: 23058, Members: Companies: 13975, Users: 36604 Gold Embrittlement In Lead-Free Solder. Craig Hillman, Nathan Blattau, Joelle Arnold, Thomas Johnston, Stephanie Gulbrandsen; DfR Solutions , Julie Silk
SMTnet Express, October 10, 2024, Subscribers: 25,836, Companies: 12,282, Users: 29,256 █ Electronics Manufacturing Technical Articles Brief description of ENIG for Multilayer PCB ENIG (Electroless Nickel/Immersion Gold) is to deposit
Surface Mount Technology Association (SMTA) | https://www.smta.org/knowledge/proceedings_abstract.cfm?PROC_ID=5255
) when the solder gold content exceeds 5% by weight. Controlling the component gold plating thickness as well as the soldering process temperature and time can prevent gold embrittlement
