SMT, PCB Electronics Industry News

CableEye® 4-Wire Calibration Verification Board, CB52

Feb 24, 2017

A calibration verification tool for your 4-Wire resistance measurement module: Determine empirically whether the HVX optional, add-on, 4-Wire measurement function requires calibration

A calibration verification tool for your 4-Wire resistance measurement module: Determine empirically whether the HVX optional, add-on, 4-Wire measurement function requires calibration

CAMI Research Inc. (Acton, MA) announces another new interface board for its CableEye cable and harness testing systems. Populated with precision resistors it allows users to determine empirically whether the HVX optional, add-on, 4-Wire measurement function requires calibration.

Configuration

A leader in development of PC-based cable and wire harness, continuity and hipot test systems for over 20 years, CAMI offers the CableEye suite of products complete with accessories – including connector boards. The selection of these test fixture boards is constantly growing and is currently numbering over 60 – most of which are populated with ‘families’ of connectors. The CB52 attaches to the tester like a regular connector board.

Sold as a SINGLE board, the CB52 contains a series of eleven precision low-value resistors for checking against the system’s calibrated values. The precision resistor values span a significant enough range to provide complete confidence of valid calibration.

Note that this is a ‘Plug & Play’ interface, requiring NO 4-wire fixturing to operate.

Application

The CB52 is intended for periodic calibration verification of the Kelvin 4-wire resistance measurement module – an optional, add-on module that may be purchased with any new hipot system, or added to an existing high voltage tester as an upgrade. To ensure that 4-wire resistance measurements remain accurate, CAMI recommends running the verification check every quarter. A 4-wire measurement module that is out of calibration will give inaccurate results. Some (maybe all) resistance measurements will be incorrect. Consequently, it may Pass what should Fail and, conversely, Fail what should Pass. In other words product yield will be contaminated due to unreliable measurements.

Companies interested in quality product and maximum yield will ensure their testers are calibrated. Those with quality certifications such as six sigma or ISO9001 will be required to calibrate. The CB52 will allow these quality-focussed companies to optimally determine when calibration is necessary and to schedule maintenance accordingly.

Warranty

All connector boards are included in CableEye’s standard, renewable one-year warranty of the tester for which it was purchased.

Availability & Domestic US Pricing

Available immediately, a CB52 is $195 (Item 782).

Contact sales@camiresearch.com or (978) 266-2655 for a quote.

Note: Prices are USA only and subject to exchange rates, freight and import costs. Contact your local authorized distributor for local pricing.


CAMI Research produces expandable and upgradable diagnostic Cable & Harness Test Systems for assembly, prototyping, production, and QC of standard or custom cables. CableEye® Testers display, and document basic electrical properties such as continuity, resistance, dielectric breakdown, insulation resistance, miswires, and intermittent defects. camiresearch.com

Oct 23, 2023 -

CableEye Wiring Analyzers Measure 10 GΩ Isolation at 100 V

Dec 07, 2022 -

Automatically Measure and Report Environmental Test Conditions with Cable/Harness Electrical Function Data

Apr 28, 2022 -

CAMI Research Releases M2Z Low Voltage Multi-Conductor Cable Tester at EWPTE, Milwaukee

Dec 17, 2021 -

Generic Custom Test Interface Fixture Rated to 2100 Vdc, CB8H For Panel- and Cable-Mounted Connectors, and LIF Test Blocks

Sep 13, 2018 -

CAMI Celebrates 25 Years Developing Automation-Ready Cable and Harness Testers

Aug 21, 2018 -

CAMI Develops Capability of Checking Twist Pair Relationships in Cables as Short as Six Feet

Mar 21, 2018 -

CAMI Research to Host Professional Development Workshops at EWPT Expo, Milwaukee

Jan 11, 2018 -

CableEye® HV-Rated QuickMount™ Housing for CAMI Connector Boards, CBH2

Aug 01, 2017 -

CableEye® USB Type-C Test Fixture, CB26U

Jul 27, 2017 -

CAMI Research Releases CableEye® USB Type-C Test Fixture, CB26U

16 more news from CAMI Research Inc. »

Mar 27, 2024 -

Red Glue SMT Solutions: A Cost-Effective Approach for Double-Sided PCBs

Mar 26, 2024 -

North American PCB Industry Sales Down 11.6 Percent in February

Mar 26, 2024 -

iNEMI/IPC White Paper on Complex Integrated Systems Highlights Future Technology and Manufacturing Ecosystem Needs

Mar 26, 2024 -

Don Dennison Appointed to Roll Out KIC's Latest Thermal Analysis System Software in the Northeast

Mar 26, 2024 -

Altus Group Achieves Record Sales Milestone with Koh Young Europe

Mar 26, 2024 -

STI Welcomes Edrick Young as the Newest Mechanical Assembly Technician

Mar 26, 2024 -

Anda Technologies Receives 2024 NPI Award for Setting a New Standard in Smart Manufacturing

Mar 26, 2024 -

ZESTRON's Olaf Schoenfeld, Ph.D. to Participate in EV Special Session at IPC APEX Expo

Mar 26, 2024 -

North American EMS Industry Up 4.1 Percent in February

Mar 26, 2024 -

SMTA Europe Announces 2024 Spring Conferences

See electronics manufacturing industry news »

CableEye® 4-Wire Calibration Verification Board, CB52 news release has been viewed 1357 times

Conductive Adhesive & Non-Conductive Adhesive Dispensing

Global manufacturing solutions provider