SMT, PCB Electronic Industry News

SMT, PCB Electronics Assembly Manufacturing Industry News

Stay informed with latest electronics manufacturing news added by SMTnet members.


  • SMTnet
  • »
  • SMT, PCB Electronics Manufacturing & Assembly Industry News

Add News »

21737 SMT / PCB Assembly Industry News Releases

SHENMAO Exhibits at ECTC in Las Vegas June 1-2, 2016 Booth # 505 Introduces BGA and Micro BGA Solder Spheres

May 16, 2016 | SHENMAO BGA Solder Spheres for PBGA, CBGA, TBGA, CSP and Flip Chip Assemblies are made by UMT (Ultra Micron Technology) from highly pure metals produced to various exact Alloy compositions using Piezoelectric Droplet Jet Technology in high volumes to accurate diameter uniformity, bright shiny surface finishes and high quality sphericity. Various diameters (0.75, 0.6, 0.5, 0.45, 0.3, 0.25, 0.1, 0.08, 0.07, 0.06 and 0.05 mm Dia.) are available at affordable low cost from 8 worldwide SHENMAO locations.

Shenmao Technology Inc.

Shenmao Technology Inc.

SHENMAO Technology, Inc. supplier of Pb/Pb-free Solder Pastes, Solder Wire, Solder Bar, Flux, BGA Sphere, Bumping Paste/Flux, PCB Plating Anode, PV Ribbon Electronics Assembly Materials, for over 44 years from 10 world locations.

TaoYuan County, Taiwan

Manufacturer

Inovar Invests in Nordson DAGE’s X-ray System to Improve Defect Detection

May 16, 2016 | Inovar, Inc., a full-service EMS provider, announces that it recently purchased and installed an XD7600NT Ruby X-ray Inspection System with X-Plane™ technology from Nordson DAGE.

Inovar, Inc.

XD7600NT Ruby X-ray Inspection System with X-Plane™ technology from Nordson DAGE.

Inovar, Inc.

Inovar, Inc. is a leading Contract Electronic Manufacturer (CEM) dedicated to providing flexible solutions to Original Equipment Manufacturers in the fastest growing segments of the electronic industry.

Logan, Utah, USA

Manufacturer

IPC Hand Soldering Competition Winner Crowned at SMT Hybrid Packaging 2016

May 16, 2016 | The competition was fierce as a new record of 43 competitors competed at IPC’s Hand Soldering Competition at SMT Hybrid Packaging 2016 in Nuremberg, Germany. Taking first place and a cash prize of €300 was Ekatarina Stahlmann of Grundig Business Syst., who earned 495 points out of 506.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association / Non-Profit, Events Organizer, Training Provider

Martin K. Anselm, Ph.D., to Present “Electronic Manufacturing Fundamentals” at SMTA Capital Chapter June Tutorial

May 16, 2016 | The SMTA Capital Chapter is pleased to announce it will welcome Martin K. Anselm, Ph.D., Rochester Institute of Technology, on June 2nd to instruct a tutorial on SMT Principles at Zentech Manufacturing, an ITAR facility located at 6980 Tudsbury Road, Baltimore, MD, 21244. The tutorial is scheduled from 8:30 am to 4:00 pm and includes lunch and a tour. As Zentech is an ITAR facility only US Citizens can participate in the tour. This tutorial is designed for those involved in printed board design, bare board fabrication, SMT assembly, quality control, materials purchasing, and reliability testing. Registration is required for this learning event.

Surface Mount Technology Association (SMTA)

Surface Mount Technology Association (SMTA)

The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.

Eden Prairie, Minnesota, USA

Association / Non-Profit, Events Organizer, Training Provider

Metcal Offers Free Soldering System with the Purchase of a Fume Extraction System

May 16, 2016 | Metcal is pleased to announce its Spring Promo, where customers can get a FREE MFR-1100 soldering system with the purchase of the two-operator BVX-201-KIT1 Fume Extraction System.  The promotion is effective immediately and ends June 30, 2016.

Metcal

BVX-201-KIT1 Fume Extraction System.

Metcal

Manufacturer of high-performance precision rework systems for the electronics bench. Product lines include: Hand Soldering and Desoldering, Convection Rework products, Fume Extraction and Fluid Dispensing tools.

Cypress, California, USA

Manufacturer

NEO Tech to Exhibit Substrate Capabilities & Microelectronic Assembly at IEEE Microwave Symposium

May 16, 2016 | NEO Tech announces that it will showcase its high-reliability substrate and microelectronic assembly capabilities in booth 2143 at the 2016 IEEE International Microwave Symposium IMS 2016, which is schedule to take place from May 24-26 at the Moscone Center in San Francisco.

NEO Technology Solutions (NEO Tech)

Microelectronic assembly capabilities.

NEO Technology Solutions (NEO Tech)

NEO Tech combines the strengths of three leading contract manufacturers: NATEL, EPIC, and OnCore.

Chatsworth, California, USA

Consultant / Service Provider, Manufacturer

Ryder’s 2015 Clean Tech Results Are In: Significant Savings in Water, Smog and Electricity

May 16, 2016 | Ryder Industries Ltd, the Swiss-owned EMS provider with manufacturing facilities in China, today released the results from its Clean Tech 2015. Ryder’s new plant in China saved: 1.3GWh of electricity (a nuclear power generation plant running at full power takes an hour to generate this) 1,500 tons of smog-gas (equivalent to a fleet of 75 twenty-ton shipping containers) 11,000 tons of water (that’s enough to fill four Olympic swimming pools)

Ryder Industries Ltd.

Ryder Industries Ltd.

A Swiss-owned developer and manufacturer of electronics products, providing superior total value EMS services.

Shenzhen, China

Consultant / Service Provider, Manufacturer

Vi TECHNOLOGY Extends its Distribution Agreement with American Tec in China

May 16, 2016 | Vi TECHNOLOGY is pleased to announce the appointment of American Tec as its distributor. Under the agreement, American Tec will distribute Vi TECHNOLOGY’s complete inspection solutions throughout all of China.

Vi TECHNOLOGY

Agreement with American Tec in China.

Vi TECHNOLOGY

Vi TECHNOLOGY is a worldwide global supplier of a wide range of innovative Automated Inspection AOI, 3D-SPI equipment and software solutions that provide real time data collection and correlation across the SMT line.

Richardson, Texas, USA

Manufacturer

ViTrox Receives Overwhelming Response at UGMs in China

May 16, 2016 | ViTrox Technologies today announced that it conducted two user group meetings (UGMs) with Linkways in Q1 2016. The events took place in Suzhou and Dongguan with approximately 120 customers at both meetings.

ViTrox Technologies

Customers having a discussion with the ViTrox and Linkways team during the networking session.

ViTrox Technologies

ViTrox is the world's most trusted cutting-edge solutions provider of innovative, advanced and cost-effective automated vision inspection systems & equipment for the semiconductor and electronic packaging industries.

Bandar Cassia, Malaysia

Manufacturer

SHENMAO Exhibits at ECTC in Las Vegas June 1-2, 2016 Booth # 505 Introduces BGA and Micro BGA Solder Spheres

May 16, 2016 | SHENMAO BGA Solder Spheres for PBGA, CBGA, TBGA, CSP and Flip Chip Assemblies are made by UMT (Ultra Micron Technology) from highly pure metals produced to various exact Alloy compositions using Piezoelectric Droplet Jet Technology in high volumes to accurate diameter uniformity, bright shiny surface finishes and high quality sphericity.

Shenmao Technology Inc.

Shenmao Technology Inc.

SHENMAO Technology, Inc. supplier of Pb/Pb-free Solder Pastes, Solder Wire, Solder Bar, Flux, BGA Sphere, Bumping Paste/Flux, PCB Plating Anode, PV Ribbon Electronics Assembly Materials, for over 44 years from 10 world locations.

TaoYuan County, Taiwan

Manufacturer

ASM at 2016 NEPCON Shanghai - Four Awards Go To Innovative Products from ASM

May 13, 2016 | At this year's NEPCON Shanghai trade show, the ASM team was honored with an impressive four prizes for its innovative products when the SIPLACE TX and the DEK NeoHorizon iX each won the EM Asia Innovation Award and the SMT China Vision Award. This was the eighth time in a row that the respective institutions' independent panels honored innovations from technology leader ASM for their speed, efficiency and accuracy.

ASM Assembly Systems GmbH & Co. KG

ASM Senior Manager Taiwanese Accounts,Jeff Jian EM receiving the Asia Innovation Awards for SIPLACE TX and DEK NeoHorizon iX.

ASM Assembly Systems GmbH & Co. KG

ASM Assembly Systems is the supplier of SIPLACE, a leader in surface mount technology (SMT) equipment, software, and services to the electronics assembly market.

Munich, Germany

Consultant / Service Provider, Manufacturer

New Era in Testing DUT over Temperature

May 13, 2016 | The process of manufacturing and qualifying IC's consists of many steps while Temperature forcing systems play a crucial role in the final testing process. These environmental tests assure quality and reliability by stressing the device on one hand as well as helping to characterize and validate it on the other hand (making sure manufacturing outcome meets the design requirements). At later stages the temperature testing can support failure analysis effort and root cause analysis. AS common practice we are dealing with few different kinds of temperature forcing systems: Chambers, Thermal Stream systems and Direct Thermal Head systems. In this article I would like to focus on the practical aspects of utilizing Thermal Stream systems and Direct Thermal Head systems.

Mechanical Devices

Mechanical Devices

We develop produce and supply innovative cost effective thermal control units to major Semiconductor Devices Manufacturers to test IC devices -LOW & HIGH Power devices for temp range -65°C to +200°C.

Haifa, Israel

Consultant / Service Provider, Manufacturer, Other

New Era in Testing DUT over Temperature

May 13, 2016 | The process of manufacturing and qualifying IC's consists of many steps while Temperature forcing systems play a crucial role in the final testing process. These environmental tests assure quality and reliability by stressing the device on one hand as well as helping to characterize and validate it on the other hand (making sure manufacturing outcome meets the design requirements). At later stages the temperature testing can support failure analysis effort and root cause analysis. AS common practice we are dealing with few different kinds of temperature forcing systems: Chambers, Thermal Stream systems and Direct Thermal Head systems. In this article I would like to focus on the practical aspects of utilizing Thermal Stream systems and Direct Thermal Head systems.

Mechanical Devices

Mechanical Devices

We develop produce and supply innovative cost effective thermal control units to major Semiconductor Devices Manufacturers to test IC devices -LOW & HIGH Power devices for temp range -65°C to +200°C.

Haifa, Israel

Consultant / Service Provider, Manufacturer, Other

Pickering Interfaces Introduces New High-Density PXI Matrix Range

May 12, 2016 | Pickering Interfaces is pleased to announce the expansion of their range of 1-pole High-Density PXI Matrix Modules. These new PXI Matrix Modules (40-520 family) are high-density matrices with 22 different configurations and up to 256 crosspoints to suit a large variety of user requirements. The choice of six bus widths (x16, x12, x8, x6, x4 and x2) enables competitively priced solutions using Pickering Electronics’ instrumentation quality reed relays. These relays offer very long life with good low-level switching performance and excellent contact resistance stability.

Pickering Interfaces Ltd.

These new PXI Matrix Modules (40-520 family) are high-density matrices with 22 different configurations and up to 256 crosspoints to suit a large variety of user requirements. Typical applications include signal routing in automatic test equipment (ATE) and data acquisition (DAQ) systems.

Pickering Interfaces Ltd.

Manufacturer of commercial and custom switching systems used in the electronics test market and for imbedded switch systems in OEM equipment.

Essex, United Kingdom

Manufacturer

Absolute Color Measurement via integrated True Color Sensor

May 12, 2016 | ​MAZeT introduces Evaluation Board and MTCS-INT-AB5 Development Kit for MTCS-CDCAF Color Sensor

MAZeT

DK MTCS-INT-AB5 Development Kit for system tests

MAZeT

MAZeT offers products for specific applications in the field of measurement, control and automation engineering - like customized ICS, sensors and components.

Jena, Germany

Consultant / Service Provider, Manufacturer

Knack Systems will be presenting with Summit Electric and Audio-Technica at SAPPHIRE NOW + ASUG Annual Conference 2016

May 12, 2016 | Knack Systems, a premium SAP consulting partner focused on optimizing the sales, service, marketing, and commerce processes of customers by leveraging SAP customer engagement and commerce solutions.

Knack Systems

Knack Systems

Knack Systems is a Premium Partner of SAP with a focus around Customer Management which includes Cloud Solutions, Hybrid Solutions, E-commerce and Analytics.

Woodbridge, New Jersey, USA

Consultant / Service Provider

Pulse Electronics' PIMinator Accessories Zero-In on DAS Network PIM Reduction

May 11, 2016 | Pulse Electronics Corporation introduces two unique and performance-enhancing installation options for its PIMinator® line of distributed antenna system (DAS) in-building ceiling-mount antennas. The DASACHOLDER is a sturdy, plastic, above-ceiling antenna holder that is easy to install, is hidden above the ceiling so it doesn't interfere with the aesthetics of the building, and does not induce passive intermodulation (PIM) in in-building installations. The DASACABSORBER attaches to the plastic holder or surrounding structures and helps mitigate the effects of PIM sources by absorbing reflections on cellular radio frequencies in the transmit and receive bands. The result is a confirmed reduction of PIM energy by as much as 40dB.

Pulse Electronics

Pulse Electronics

Pulse Electronics has a long operating history of innovation in magnetics, antennas and connectors.

San Diego, California, USA

Consultant / Service Provider

Built-in Laser Pointer now an Option for Optilia M Series Inspection Systems

May 11, 2016 | Integral Laser Pointers are now an available option on economical M Series inspection systems, Optilia Instruments announced today. Although Optilia has always included integral laser pointers as a standard feature of the high end W Series, due to customer demand, the optional feature is now available for the M Series as well. The laser pointer feature is available for the entire M Series range including the Easyview standard 245mm Working Distance (WD) and Freesight 500mm WD models.

Optilia Instruments AB

Built-in Laser Pointer now an Option for Optilia M Series Inspection Systems.

Optilia Instruments AB

Sollentuna, , Sweden

Henkel Honors Manufacturing Representative, E-Tronix, with its Fifth North American Representative of the Year Award

May 11, 2016 | Henkel Adhesive Technologies’ Electronics business has named E-Tronix its 2015 North American Manufacturing Representative of the Year. This is the fifth time in six years that the company has earned this distinction, which Henkel awards to its top performing representative as measured against very stringent criteria.

Henkel Electronic Materials

Henkel Electronic Materials

Henkel is a manufacturer of materials for PCB and component assembly. The materials include Loctite adhesives, Multicore soldering products, Hysol encaps and underfills, and Power Devices thermal phase change pads.

Irvine, California, USA

Manufacturer

Free “DI-water vs Chemistry” Webinar Presented by ZESTRON Academy

May 11, 2016 | ZESTRON is pleased to announce that the third installment of ZESTRON Academy’s 2016 Cleaning Webinar Series, “DI-water vs Chemistry” will be held on May 19th, at 1:30 PM EDT.

ZESTRON Americas

ZESTRON Americas

The globally leading provider of high precision cleaning products, services and training solutions in the electronics and semiconductor manufacturing industries.

Manassas, Virginia, USA

Consultant / Service Provider, Manufacturer, Training Provider

Jetting Pump Configurations Now Available for Integrating into Third Party Dispense Systems.

May 10, 2016 | GPD Global offers individual pumps for integration into your existing platform – the Jetting NCM5000 Pump is one of them. The Jetting NCM5000 Pump simplifies jetting to its basic elements: hammer, pin, and nozzle. Only the pin and nozzle are wetted parts. This means easy set-up, cleaning, and upkeep.

GPD Global

GPD Global

A Manufacturer of High Quality, Precision, Automated Fluid Dispensing and Conformal Coating Systems, SMT Cover Tape Peel Tester and Lead Forming machines for through-hole component preparation.

Grand Junction, Colorado, USA

Manufacturer

Henkel Partners with Tekra to Expand Coverage of its Electronic Inks Business in North America

May 09, 2016 | Henkel Adhesive Technologies’ Electronics business today announced a new distribution partnership with plastic film and adhesives solutions provider, Tekra, A Division of EIS, Inc. Under the terms of the agreement, Tekra will deliver sales, technical consultation and post-sale service for Henkel’s full line of electronic ink materials in support of customers throughout North America.

Henkel Electronic Materials

Henkel Electronic Materials

Henkel is a manufacturer of materials for PCB and component assembly. The materials include Loctite adhesives, Multicore soldering products, Hysol encaps and underfills, and Power Devices thermal phase change pads.

Irvine, California, USA

Manufacturer

Altus and Danutek Team Up to Share Resources

May 09, 2016 | The Koh Young Zenith 3D AOI systems continue to prove themselves technically, while gaining traction and momentum in the European market. The quality and quantity of applications and process support are critical to the ongoing satisfaction of existing and prospective customers.

Altus Group

Altus Group

The Altus Group is one of the fastest growing distribution companies in east Central Europe. We have a seperate division that refurbishes second user equipment for the electronics industry using our reknowned customer support team.

Kirkcaldy, United Kingdom

Distributor

The PNC Inc. Open House is right around the Corner!

May 09, 2016 | PNC Inc. in Nutley, NJ is holding its first ever open house. The event has been in the making for months now and is sure to be a unique experience for all who attend. PNC has recently made vast expansions to its headquarters facility in Nutley, NJ—with regards to both space and equipment. From upgrades in process and quality control in the PCB fabrication department to a state of the art new assembly department.

PNC Inc.

PNC Inc.

Complete turnkey jobs from PCB design, Fabrication, Laser cut SMT stencil, PCB assembly (SMT and through hole), Cable assembly and wire harness, Membrane switches, Name-plates and graphical overlays, all under one umbrella!

Nutley, New Jersey, USA

Consultant / Service Provider, Manufacturer

Libra Industries Announces New Senior Account Manager

May 09, 2016 | Libra Industries is pleased to announce the appointment of Dan Rekieta – Senior Account Manager.

Libra Industries, Inc.

Dan Rekieta – Senior Account Manager. 
 

Libra Industries, Inc.

A leading provider of integrated Electronic Manufacturing Services serving OEM manufacturers dealing with complex or technically sophisticated manufacturing requirements in diverse industries and applications.

Mentor, Ohio, USA

Manufacturer

SMTA China Presents Nine Best-Paper / Oustanding Paper / Best Presentation Awards and Two Best Exhibit Awards at SMTA China East 2016 Conference / Nepcon China 2016

May 09, 2016 | SMTA China announces that it presented awards for Nine papers at the SMTA China East 2016 Conference Award Presentation Ceremony, held on Tuesday, April 26, 2016 at Shanghai World Expo Exhibition & Convention Center in conjunction with the SMTA China Annual Award Ceremony.

Surface Mount Technology Association (SMTA)

Surface Mount Technology Association (SMTA)

The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.

Eden Prairie, Minnesota, USA

Association / Non-Profit, Events Organizer, Training Provider

Engineered Material Systems to Showcase Adhesives for Stringing and Shingling Next Generation Solar Modules at Intersolar/EU PVSEC

May 09, 2016 | Engineered Material Systems will exhibit its new 561-400 series Low-Cost Snap Cure Conductive Adhesives at the Intersolar/EU PVSEC show, scheduled to take place June 23-25, 2016 in Munich. The 561-400 series is designed for stringing and shingling crystalline silicon and heterojunction solar modules.

Engineered Conductive Materials, LLC

Engineered Conductive Materials, LLC

ECM's technology focus is electronic circuit fabrication which compliments EMS's circuit assembly product line.

Delaware, Ohio, USA

Manufacturer

Count On Tools, Inc. Introduces the MYDATA Agilis Feeder Repair Set

May 09, 2016 | Count On Tools introduces the new MYDATA Agilis Feeder Repair Set. This option allows customers to convert any Agilis feeder to any of the four sizes to reduce overall feeder count and maximize production capabilities.

Count On Tools, Inc.

MYDATA Agilis Feeder Repair Set.

Count On Tools, Inc.

COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.

Gainesville, Georgia, USA

Manufacturer

Computrol Strengthens Its Functional Test Capabilities with a SPEA 4050 Flying Probe Tester

May 09, 2016 | Computrol today announced that it has purchased and installed a SPEA 4050 Flying Probe Tester. The addition of the SPEA flying probe at Computrol’s Meridian, ID facility further strengthens the company’s extensive functional test capabilities.

Computrol, Inc.

Jim Socwell, Test Technician.

Computrol, Inc.

Computrol, Inc. is a national leader in low to medium volume, high mix contract manufacturer of electronic assemblies. We specialize in customer service, quality and on time delivery. We have 3 locations in the United States.

Meridian, Idaho, USA

Manufacturer

ASC International to Offer Live 3D SPI Demos

May 09, 2016 | ASC International today announced that it will exhibit at the SMTA Wisconsin Expo & Tech Forum, scheduled to take place Tuesday, May 10, 2016 at the Milwaukee Airport Crowne Plaza. ASC International will offer live demonstrations of the VisionPro M500 during the expo.

ASC International

ASC International

Supplier of Optical Based Inspection and Measurement Equipment.

Medina, Minnesota, USA

Manufacturer

Acculogic Will Show Advanced Test Equipment at the Space Tech Expo

May 09, 2016 | Acculogic Inc. announces that it will exhibit in Booth #4031 at the Space Tech Expo, scheduled to take place May 24-26, 2016 at the Pasadena Convention Center in Pasedena, California. The company’s Test Engineering division offers a comprehensive range of turn-key services that range from in-circuit test fixture and program development to sophisticated application development on custom functional test platforms.

Acculogic Inc.

Acculogic Inc.

Manufacturer of a broad range of systems & instruments for testing electronic devices, circuit boards and more. Products include Boundary Scan (JTAG) test systems and Flying Probe testers.

Markham, Ontario, Canada

Consultant / Service Provider

Inlynk Software

INLYNK Software is a Software Solution provider for the electronics manufacturing industry. FEATURES: - Parts & BOM Management - Suppliers Management - Customers Management - Production Management

Laval, Quebec, Canada

Consultant / Service Provider

MOST® Worldwide

May 09, 2016 | MOST Cooperation Announced the Worldwide Acceptance of Over 200 Vehicle Models with MOST Inside During the 8th MOST Forum

MOST Cooperation

MOST Cooperation celebrates worldwide acceptance of over 200 vehicle models with MOST inside

MOST Cooperation

The MOST Cooperation (MOSTCO) is the organization through which MOST Technology is standardized and refined so that it continues to stay abreast of the latest industry requirements.

Karlsruhe, Germany

Other

KYZEN Wins Third Consecutive Award for AQUANOX A8820

May 05, 2016 | KYZEN announces that it has been awarded the 2016 EM Asia Innovation Award in the category of Cleaning Materials for its AQUANOX® A8820 Advanced Aqueous Stencil Cleaner. The award was presented to the company on April 26, 2016 at the Shanghai World Expo Exhibition & Convention Center during NEPCON China.

KYZEN Corporation

Asia Innovation Award.

KYZEN Corporation

A leading supplier of precision cleaning chemistries to the worldwide electronics, metal finishing, medical, semiconductor, and optical industries.

Nashville, Tennessee, USA

Manufacturer

Scienscope Enters Exclusive Representative Agreement with ARK Manufacturing Solutions, LLC for Arizona, New Mexico and Sonora, Mexico

May 05, 2016 | Scienscope International has appointed Ark Manufacturing Solutions as its exclusive manufacturers’ representative in the Southwestern U.S. ARK Manufacturing Solutions will represent Scienscope’s state-of-the-art X-ray cabinet systems.

SCIENSCOPE International

Dave Murrin, President and principal owner of ARK Mfg. Solutions.

SCIENSCOPE International

Scienscope supplies inspection equipment, including stereo zoom microscopes, video an X-Ray inspection equipment, automated optical inspection systems, magnifiers, measurement systems.

Chino, California, USA

Manufacturer

Mentor Graphics Announces PADS PCB Product Creation Platform with Voltage Drop and Electronic Cooling Capabilities

May 05, 2016 | Mentor Graphics Corporation (NASDAQ: MENT) today announced a comprehensive product-creation platform based on PADS® PCB software that enables individual engineers and small teams to solve the engineering challenges involved in creating today’s electronic products. With increasing systems design complexity and the need for printed circuit board (PCB), mechanical and systems engineers to access easy-to-deploy tools, the PADS platform has been extended to enable engineers to develop PCB-based systems from concept through manufacturing hand-off.

Mentor Graphics

Mentor Graphics

A leader in software solutions for electroncs design, Mentor Graphics is the only EDA company with a total end-to-end solution for design though manufacturing.

Wilsonville, Oregon, USA

Consultant / Service Provider

Pickering Interfaces Introduces New High-Density 2 Amp PXI Relay Module

May 05, 2016 | Pickering Interfaces is pleased to announce the launch of a new High-Density 2 Amp PXI Relay Module.

Pickering Interfaces Ltd.

High-Density 2 Amp PXI Relay Module.

Pickering Interfaces Ltd.

Manufacturer of commercial and custom switching systems used in the electronics test market and for imbedded switch systems in OEM equipment.

Essex, United Kingdom

Manufacturer

Akrometrix Announces the Release of the CRE6, Convection Reflow Emulation for Warpage Metrology

May 05, 2016 | Akrometrix today announced that the company released its next-generation Convection Reflow Emulation Module (CRE6) for warpage metrology.

Akrometrix

Akrometrix

Leading provider of full-field metrology solutions for substrates and packages in the OEM/CEM/SATS/PCB segments of the microelectronics industry.

Atlanta, Georgia, USA

Consultant / Service Provider, Manufacturer

IPC AND ITI TO HOST CONFERENCE ON CRITICAL AND EMERGING ENVIRONMENTAL PRODUCT REQUIREMENTS

May 05, 2016 | IPC – Association Connecting Electronics Industries® and the Information Technology Industry Council (ITI) will host a conference series on “Critical and Emerging Environmental Product Requirements” this June.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association / Non-Profit, Events Organizer, Training Provider

SMTA China Announces Winners of the 2016 Annual Awards

May 05, 2016 | SMTA China held its annual awards presentation at the SMTA China Annual Award Ceremony, which took place on Tuesday, April 26, 2016 at the Shanghai World Expo Exhibition & Convention Center.

Surface Mount Technology Association (SMTA)

Surface Mount Technology Association (SMTA)

The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.

Eden Prairie, Minnesota, USA

Association / Non-Profit, Events Organizer, Training Provider

SMTA/CALCE Announce Program for Symposium on Counterfeit Parts and Materials

May 05, 2016 | The Surface Mount Technology Association (SMTA) and the Center for Advanced Life Cycle Engineering (CALCE) announce the preliminary technical program for the Symposium on Counterfeit Parts and Materials this June 28-30, 2016 in College Park, Maryland.

Surface Mount Technology Association (SMTA)

Surface Mount Technology Association (SMTA)

The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.

Eden Prairie, Minnesota, USA

Association / Non-Profit, Events Organizer, Training Provider

ZESTRON Announces REStronics Northern California as New Sales Representative

May 05, 2016 | ZESTRON is pleased to announce that REStronics Northern California is now representing its complete line of cleaning process solutions and services within Northern California and Northern Nevada.

ZESTRON Americas

ZESTRON Americas

The globally leading provider of high precision cleaning products, services and training solutions in the electronics and semiconductor manufacturing industries.

Manassas, Virginia, USA

Consultant / Service Provider, Manufacturer, Training Provider

Pickering Interfaces Introduces New High-Density 2 Amp PXI Relay Module

May 05, 2016 | Pickering Interfaces is pleased to announce the launch of a new High-Density 2 Amp PXI Relay Module.

Pickering Interfaces Ltd.

The new High-Density 2 Amp PXI Relay Module is suitable for applications requiring medium power switching with very high density.

Pickering Interfaces Ltd.

Manufacturer of commercial and custom switching systems used in the electronics test market and for imbedded switch systems in OEM equipment.

Essex, United Kingdom

Manufacturer

Industry Veteran Joins Creative Electron

May 05, 2016 | San Marcos, CA – Creative Electron, Inc., a leading American manufacturer of x-ray inspection systems announced today that David Phillips joined the company as Customer Service Manager. A seasoned veteran in the x-ray inspection market, David brings to Creative Electron over 22 years of management and customer service experience fostering positive professional relationships with a variety of diversified clients.

Creative Electron Inc

Creative Electron Inc

Creative Electron is the largest US manufacturer of x-ray inspection systems for electronics. We proudly design and manufacture the award winning TruView X-Ray family of products.

San Marcos, California, USA

Consultant / Service Provider, Manufacturer, Standards Setting / Certification

Enhanced capabilities powers next generation of optical eyepiece-less stereo microscope

May 04, 2016 | Vision Engineering Inc. announces an enhanced version of their acclaimed Lynx EVO eyepiece-less stereo microscope, which now includes the option of powerful zoom magnification multipliers to increase the total system magnification up to 240x.

Vision Engineering Inc.

The Lynx EVO multiplier increases magnification up to 240x.

Vision Engineering Inc.

With over 60 years of manufacturing excellence, we are one of the world's innovative and dynamic microscope manufacturers. Our products deliver unrivaled ergonomics for improved accuracy, repeatability, and productivity.

New Milford, Connecticut, USA

Manufacturer, Other

EVO Cam digital microscope enhances inspection capabilities with stunning full-HD 360° rotating views.

May 04, 2016 | Vision Engineering Inc., leaders in visual inspection technologies for nearly 60 years, announces a new 360° rotation viewer for the EVO Cam digital microscope. Specifically designed for quality control, testing, inspection and documentation, the rotating viewer for the EVO Cam delivers an oblique view of the subject that can be rotated 360° degrees around a central point, making it ideal for working with engineered, electronic, or precision parts – the fastest, simplest way to inspect all the way around a component without holding it.

Vision Engineering Inc.

EVO Cam digital microscope with 360° rotating viewer

Vision Engineering Inc.

With over 60 years of manufacturing excellence, we are one of the world's innovative and dynamic microscope manufacturers. Our products deliver unrivaled ergonomics for improved accuracy, repeatability, and productivity.

New Milford, Connecticut, USA

Manufacturer, Other

CAMI Research, a WHCC Top Product Winner, Issues New Catalog

May 04, 2016 | CAMI Research has issued its latest catalog featuring new products and services. Available immediately, the catalog showcases their expanding CableEye suite of Low and High Voltage (HiPot) test system products for cable & wire harness manufacturing.

CAMI Research Inc.

CAMI Research Inc.

CableEye® continuity and HiPot pass/fail & diagnostic Cable & Harness Test Systems w simple scripting, labeling, documentation, cataloging & relay control. Dynamically display continuity, Ω, diodes, IR, dielectric breakdown & more

Acton, Massachusetts, USA

Consultant / Service Provider, Manufacturer

MIRTEC’S MV-6 OMNI 3D AOI MACHINE “TAKES ASIA BY STORM” WINNING TWO PRESTIGIOUS AWARDS

May 03, 2016 | MIRTEC, “The Global Leader in Inspection Technology,” is pleased to announce that it was awarded the 2016 EM Asia Innovation Award in the category of Inspection & Testing – AOI for its MV-6 OMNI 3D AOI system. The award was presented to the company during a ceremony that took place April 26, 2016 at the Shanghai World Expo Exhibition & Convention Center during NEPCON China. MIRTEC’s MV-6 OMNI also earned the top score in the AOI category, resulting in an SMT China Vision Excellence Award.

MIRTEC Corp

2016 EM Asia Innovation Award.

MIRTEC Corp

MIRTEC has earned a solid reputation as one of the most Progressive and Dynamic Suppliers of Automated SMT Inspection Equipment to the Electronics Manufacturing Industry.

Oxford, Connecticut, USA

Manufacturer

Hallmark Nameplate Selects Ersa’s Smartflow 2020 Selective Soldering System

May 03, 2016 | Kurtz Ersa North America is pleased to announce that it has installed a Smartflow 2020 selective soldering system at Hallmark Nameplate, Inc.’s ESD-controlled manufacturing facility in Florida. Hallmark Nameplate offers through-hole, surface mount, or mixed-PCB assembly services. With universal pallet fastening, the Smartflow 2020 will compliment Hallmark Nameplate’s prototyping, rework services and modifications of existing builds.

kurtz ersa Corporation

From left to right: Grover Martin – CM Manager, and Kurt Stura – VP of Operations.

kurtz ersa Corporation

Manufacturer of Selective Soldering Systems, Ersascope BGA Inspection Systems, BGA Rework Systems, Soldering Irons, Wave Solder and Reflow Equipment.

Wertheim, Germany

Manufacturer

KIC Brings on New COO

May 03, 2016 | KIC today announced that it has hired Isidre Rosello. Reporting directly to the company’s president, Rosello will plan and direct KIC’s operations, new product and services development, company objectives, initiatives, and drive the company’s financial and operational goals.

KIC Thermal

Isidre Rosello.

KIC Thermal

KIC's provides products and services designed to improve a variety of thermal monitoring, profiling and process control applications.

San Diego, California, USA

Consultant / Service Provider

News per page:

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435

  • SMTnet
  • »
  • SMT, PCB Electronics Manufacturing & Assembly Industry News
Reflow Oven

Sell Your Used SMT & Test Equipment