Dek horizon 03 adding 2d vision?

Subscribe to Thread

Looking to find out I can add 2D vision to this 2010 horizon... - Feb 07, 2017 by PRoy

You can. It is an option from Dek and you can buy it. It is ... - Mar 07, 2017 by Buckcho

In most instances, it is cycle time prohibitive to use it to... - Mar 07, 2017 by A Very Frazzled Man

I have yet to find anyone at DEK to talk to and purchase. I... - Apr 11, 2017 by PRoy

Or if you have 2010 Dek, you can get the paste height monito... - May 31, 2017 by Buckcho

> Looking to find out I can add 2D vision to this > ... - Jun 08, 2017 by SuMoTe

Thanks, I try. But enable codes on Micron class not somethi... - Jun 13, 2017 by DEKHEAD

PRoy

#77061

Dek horizon 03 adding 2d vision? | 7 February, 2017

Looking to find out I can add 2D vision to this 2010 horizon printer......

reply »

Buckcho

#77205

Dek horizon 03 adding 2d vision? | 7 March, 2017

You can. It is an option from Dek and you can buy it. It is not as good as SPI, but if you don't want to check all pads it is okay.

reply »

A Very Frazzled Man

#77208

Dek horizon 03 adding 2d vision? | 7 March, 2017

In most instances, it is cycle time prohibitive to use it to check the entire PCB. But you can use it to check critical areas. You can also set it up to check every 2nd, 3rd, 5th panel. (etc)

reply »

PRoy

#77388

Dek horizon 03 adding 2d vision? | 11 April, 2017

I have yet to find anyone at DEK to talk to and purchase. I will use it on corners , edges and critical parts only . This is a simple matter of user feedback when the past roll is getting too small.

reply »

Buckcho

#77654

Dek horizon 03 adding 2d vision? | 31 May, 2017

Or if you have 2010 Dek, you can get the paste height monitoring system, which is pretty cool. I used it and for Lead free paste is great. Combined with the dispensing system I made my operators very lazy :)

reply »

SuMoTe

#77699

Dek horizon 03 adding 2d vision? | 8 June, 2017

> Looking to find out I can add 2D vision to this > 2010 horizon printer......

For all things DEK, John Spangler is your guy.

http://www.dekhead.com/

reply »

DEKHEAD

#77725

Dek horizon 03 adding 2d vision? | 13 June, 2017

Thanks, I try. But enable codes on Micron class not something I can accomplish.