SM421 Vision problem

Subscribe to Thread

Hello, We are currently having a problem with the output ... - Feb 02, 2016 by adam

Hello Adam, One of our customers had a similar issue with... - Feb 03, 2016 by Automation Technical Services

Hello, Glad to hear that you're on the market for SMT line.... - Mar 22, 2016 by Annabella

replace the cable, this happens when cable is broken ... - Mar 27, 2016 by Tsvetan Usunov

actually there will be internal damage on the cable resultin... - Apr 09, 2016 by SMT-Spares

adam

#75304

SM421 Vision problem | 2 February, 2016

Hello,

We are currently having a problem with the output of the cameras in our SM421, the fault we are seeing is a flickering across only the 6 flycam cameras (this is causing SM vision to not correctly reference the parts) We have tried: Swapping the flycam I/O Swapping the vision I/O cleaning contacts and connectors relevant. the problem remains, fiducial cam and fixed cam do not have the same fault. Has anyone got any recommendations or seen anything similar?

Regards Adam

reply »

Automation Technical Services

#75314

SM421 Vision problem | 3 February, 2016

Hello Adam,

One of our customers had a similar issue with the SM421 I believe the fix was replacing the camera.

We recently launched a new product that eliminates splicing cut tape on the Samsung platform you can learn more about our Cut Tape Feeder Fingers at http://feederfinger.com/

Good luck with your camera issue

Kelvin

Feeder Finger

reply »

Annabella

#75468

SM421 Vision problem | 22 March, 2016

Hello, Glad to hear that you're on the market for SMT line.

We specialize in this field for several years, with the strength of SMT nozzle and feeder, with good quality and prett competitive price.

Should you have any questions, pls do not hesitate to contact me. FREE SAMPLES will be sent for your evaluation!

Best Wishes Anna

reply »

Buckcho

#75476

SM421 Vision problem | 25 March, 2016

Hello, I had similar problem. We replaced the cameras as well as lighting. You can try replacing the cable, which sometimes can give you similar problems.

reply »

Tsvetan Usunov

#75481

SM421 Vision problem | 27 March, 2016

replace the cable, this happens when cable is broken

reply »

SMT-Spares

#75518

SM421 Vision problem | 9 April, 2016

actually there will be internal damage on the cable resulting from frequent move during production,which is not visible,

but in normal case either the camera or the control board or the cable has problem，

Camera and control board could be repaired by the third party,but a bit difficult to repair well the cable,