IPC-7711/7721 Specialist (CIS) Certification Training Course

Category:

IPC-7711/7721 Specialist (CIS)

Where | When:

Illinois, Rolling Meadows | Jun. 18 - Jun. 22, 2018

Michigan, Auburn Hills | Jun. 25 - Jun. 29, 2018

Minnesota, Rosemount | Jun. 11 - Jun. 15, 2018

Ohio, Cleveland | May. 07 - May. 11, 2018

Description:

IPC 7711

The IPC-7711/7721 Certification for Specialist (CIS) Course is divided into two sections i.e IPC 7711 and IPC 7721. 

The IPC 7711 Certified IPC Specialist (CIS) course leads to the two-year certification through IPC. The training course uses lectures and practical application to teach the rework criteria of the IPC 7711 Rework of Electronic Assemblies document. The training course consists of 6 modules, each of which covers specific rework areas. Please click on the course overview to view the various modules.

The candidate will be taught and shown various skills necessary to perform rework at an advanced level. These include but are limited to the following:

  • Demonstrate recommended wire splicing techniques
  • Remove and replace Plated Through Hole components
  • Remove and replace Chip SMT components using a variety of methods
  • Remove and replace J-lead SMT components using a variety of methods
  • Remove and replace SOIC Gull Wing and SOT SMT components using a variety of methods

These methods will include vacuum extraction, component-specific tips, as well as bottom heater and hot air removal system.

COURSE OBJECTIVE

  • Demonstrate recommended wire-splicing techniques
  • Remove and replace plated through-hole components
  • Remove and replace chip and MELF SMT components
  • SOIC Gull Wing and SOT SMT components
  • J-Lead SMT Components
  • Successfully pass written exams with a 70% or better average score on the IPC exams

MATERIALS PROVIDED

  • IPC 7711 Specification
  • IPC Certificate of Completion

IPC 7721

The IPC 7721 Certified IPC Specialist (CIS) course leads to an IPC certification that is valid for two years. The training course uses lecture and practical application to teach the repair criteria of the IPC 7721 Repair and Modification of Printed Boards and Electronic Assemblies documents. The training course consists of 4 modules which cover areas specific to the IPC 7721. Please click on the course outline to view the modules.

COURSE OBJECTIVE

  • Demonstrate recommended land replacement techniques
  • Demonstrate plated through-hole repair techniques
  • Demonstrate jumper wire installation techniques
  • Demonstrate laminate repair techniques
  • Earn an overall score of 70% or better on the IPC written examinations in order for certification

MATERIALS PROVIDED

  • IPC 7721 Specification
  • IPC certificate of completion

The IPC 7721 CIS training program requires trainers who are highly skilled in PCB repair processes. Each of the BEST instructors has a minimum of 15 years of soldering and PCB repair experience. This experience will help the IPC 7721 CIS candidates get the "tricks of the trade" that are required to perform the PCB repair procedures. IPC 7721 CIS candidates will walk away with their IPC credentials as well as several tricks that will stay with them for years. The IPC 7721 CIS candidates can be trained in one of the BEST training centers as well as on-site or in the BEST mobile training center. 

To plan for  IPC-7711/7721 Certification or for facilitating in your general vicinity please contact BEST Inc. 

Call BEST today  +1 (847) 797 9250 for all your IPC 7721/7721 CIS training needs.

Url:

http://www.solder.net/training/courses/ipc-7711-cis-training/

  • AZ, CO | Blackfox Training Institute, LLC
  • MD, NC | Circuit Technology Inc.
  • TX | Verion Training Systems, LLC
  • PA | Technical Training Center
  • FL | EEI
  • See all Certified IPC-7711/7721 Specialist (CIS) Courses »

IPC-7711/7721 Specialist (CIS) Certification Training Course event has been viewed 873 times

Europlacer iineo+ SMT pick and place with integrated component tester

 Reflow System

var anUrl = "/fusionreactor/UEM.cfm?db=426&wr=107&s=FD2D676FAD1B669BC859CED993B4E509&t=1081528750";document.write(unescape("%3Cscript src='/fusionreactor/UEMJS.cfm' type='text/javascript'%3E%3C/script%3E"));