SMT & PCB Equipment Parts

SMT Equipment Parts & Supplies

Sencore LC103 listed by Test Equipment Connection. Add your item for sale/wanted

Sencore LC103

Sencore LC103

Sencore LC103


Sencore LC103


Test Equipment

Model Year:





Florida, USA

Offered by:

Test Equipment Connection

Company Information:

Test Equipment Connection

The Worlds Largest Distributor of New, Refurbished, and Second Hand Electronic Test and Measurement (T&M) Equipment.

Lake Mary, Florida, USA

Equipment Dealer / Broker, Inspection, Manufacturer of Assembly Equipment

  • Phone 407-804-1299
  • Fax 407-804-1277

Test Equipment Connection website

Company Postings:

(3842) used SMT equipment marketplace items

(69) products in the catalog

(26) news releases

Sencore LC103 Specs:

Sencore LC103.

LC103 Condensed Specifications

IN-CIRCUIT TESTS (Capacitors and Inductors):

- Dynamic in-circuit tests to determine whether the component is good or bad. Component Types: Electrolytic, double layer lytic, tantalum, ceramic, and other capacitors.

Yokes, flybacks, switching transformers, and coils. Inductor Range: 3.18 uH to 3.18 H

Capacitor Range: 0.002 uF to 20,000 uF

Accuracy: Same as Out-of-Circuit tests for known good inductors and capacitors with no parallel

current paths.

Suggest Removal Indication: Initiated when AC test differs from DC test by more than 20%,

or if low level DCR test indicates a leakage path greater than 20% of charge current for capacitors.

CAPACITORS (Out-of-Circuit):

Value: Dynamic test of capacity value is determined by applying a constant current to the capacitor and measuring the dV/dt.

Range: 1 pF to 20 F

Accuracy: ±1%, ±1 pF, ±1 digit for values to 1990 uF, ±5%;

±0.1% of range full scale for values 2000 uF to 20 F


Accuracy: ±5%, ±1 digit

Capacitor Range: 0.01 uF to 20 F


Accuracy: ±5% of reading, ±1 count

Range: 1 to 100%

Capacitor Range: 0.01 uF to 20 F


Accuracy: ±5%, ±1 digit

Applied Voltage: Keyboard entry 1.0 to 1000 volts in 0.1 volt steps short circuit current limited to 900 mA

INDUCTORS (Out-of-Circuit):

Value: A dynamic test of value determined by measuring the EMF produced when a changing current

is applied to the coil under test

Range: 0.1 uH to 20 H

Accuracy: ±2%, ±1 digit, ±0.1 uH


- A dynamic test of inductor quality determined by applying an exciting pulse to the inductor and counting the number of cycles the inductor rings before reaching a preset damping point.

Inductor Range: 10 uH and larger, non-iron core

Accuracy: ±1 count on readings between 8 and 13 Rings Resolution: ±1 count

Exciting Pulse: 5 volts peak


Temperature Operating Range: 32¡ to 104¡ F (0¡ to 40¡ C)

Temperature Range for Specified Accuracy (after 10 minute warm-up): 50¡ to 86¡ F (10¡ to 30¡ C)

Power: 105-130V AC, 60Hz, 30 watts with supplied PA251 power adapter.

Battery operation with optional BY289 rechargeable battery.

Auto-Off: Removes power during battery operation if unit sits idle longer than 5 minutes.

Battery Life: 2 hours typical operation

HxWxD Size: 6" x 9" x 11.5" (15.2 cm x 22.9 cm x 29.l cm)

Weight: 6.0 lbs. (2.7 kg) without battery, 7.6 lbs. (3.4 kg) with battery

GOOD/BAD Indication: Functions on all tests.

Requires user input of component type and value, or input of desired limits.

This Sencore LC103 has been viewed 383 times.

The contact for this Sencore LC103 has been emailed 0 times.

reflow oven profiler

SMT Machines