SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • Seika Machinery, Inc. to Debut New McDry Products and Features at IPC APEX EXPO

Seika Machinery, Inc. to Debut New McDry Products and Features at IPC APEX EXPO

Feb 14, 2011

At the show, Seika will debut the MC-1002 PCB Storage Cabinet for the first time. The low-cost, high performance cabinet was developed to assist companies that are trying to conform to IPC-1601 August 2010 Printed Board Handling and Storage Guidelines.

At the show, Seika will debut the MC-1002 PCB Storage Cabinet for the first time. The low-cost, high performance cabinet was developed to assist companies that are trying to conform to IPC-1601 August 2010 Printed Board Handling and Storage Guidelines.

TORRANCE, CA - Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, will debut new products and features from McDry in Booth #459 at the upcoming IPC APEX EXPO, scheduled to take place April 12-14, 2011 at the Mandalay Bay Resort & Convention Center in Las Vegas.

At the show, Seika will debut the MC-1002 PCB Storage Cabinet for the first time. The low-cost, high performance cabinet was developed to assist companies that are trying to conform to IPC-1601 August 2010 Printed Board Handling and Storage Guidelines.

The cabinet is ESD-IEC61340-5-1 compliant and grounded to prevent static electricity. The system is equipped with a digital RH meter and maintains a 3 percent RH level. Additionally, the PCB storage cabinet features locking doors and adjustable shelves that can hold up to 220lbs.

Also on display, the DXU-580AF Feeder Storage Cabinet features an ergonomic design for smaller quantity storage that may be placed on each line. This system can hold up to 20 feeders depending on the reel size and is ergonomic because it uses a sliding shelf for ease of installation and removal. The height and angle also are designed for most operators to handle feeder storage easily. As an option, this model features one shelf for storage of trays and extra reels.

The MB-301 Low Temperature & Low Humidity Baking Cabinet features a 40C° baking temperature, as well as a 5 percent RH humidity level during bake out period and 3 percent RH level in dry storage. The cabinet’s electrostatic discharge conforms to the IEC-61340-5-1 (ESD) Standard for Handling. The MB-301 cabinet comes standard with a drying unit and can be used as a regular dry storage cabinet when heater for baking is turned off. Additional features include a large display digital RH meter and a 1MΩ ground terminal.

Seika also will highlight new features for McDry Storage Cabinets, including the McDry Signal Tower and ERC-301AD Hygrometer with Alarm System. With the new hygrometer, the light signal will flash and audible alarm will sound off when the humidity level goes over the set limit over a fixed period of time. After the alarm flashes, the unit will save ten data readings, one per hour.

Visit Michelle Ogihara, Sales & Marketing Manager, in Booth #459 at the show to discuss the new McDry products and features. For more information about McDry Storage Cabinets, visit http://www.seikausa.com.

Seika Machinery, Inc. (SMI) is a subsidiary of Seika Corporation, Japan and member of the Mitsubishi Global Group. SMI provides electronics manufacturers with advanced machinery, superior materials and engineering services.

Aug 15, 2017 -

Seika to Bring the Industry’s Top Manufacturing Equipment to SMTAI

Jun 29, 2017 -

Seika Introduces Sayaka Twin Table PCB Router with Online Camera for Programming

May 03, 2017 -

Effectively Test Wetting Balance of Component Leads with the New MALCOM SWB-2 Dip Wetting Tester

Feb 23, 2017 -

Seika Recognizes Top Performing McDry Reps during APEX

Feb 01, 2017 -

New Bubble Washer System for Stubborn Flux Cleans Five Times Faster than Immersion Cleansing

Jan 11, 2017 -

Seika Machinery to Bring New Kawaski Dual Arm SCARA Robot to APEX

Jan 10, 2017 -

New SAWA Ultrasonic Squeegee Cleaner Presents New Solution for Lead-Free Pastes

Jan 09, 2017 -

Explore Industry-Leading Equipment from Seika Machinery at APEX

Sep 12, 2016 -

Seika Machinery to Bring a Modular Reflow Oven Profiling System to SMTA Guadalajara

Sep 08, 2016 -

Attend the SMTA Ambassador Reception during SMTAI

186 more news from Seika Machinery, Inc. »

Aug 19, 2017 -

See Latest Dispense Technology Demonstrations From GPD Global at NEPCON 2017

Aug 17, 2017 -

ZESTRON Americas Announces New Regional Sales Manager

Aug 17, 2017 -

SEHO Soldering Expert to Discuss Resource & Cost Efficient Wave Soldering at SMTAI

Aug 17, 2017 -

Libra Industries Announces Two 20-Year Service Awards in Q2 2017

Aug 17, 2017 -

Cirtronics Installs High-Performance X-ray Inspection Solution

Aug 17, 2017 -

Essemtec to Show New All-in-One Jetting / Placement System at SMTAI

Aug 17, 2017 -

Engineered Material Systems to Introduce New Conductive Adhesives for Stringing and Shingling Next-Generation Solar Modules at EU PVSEC

Aug 17, 2017 -

What is SMT and where to by SMT spare parts

Aug 16, 2017 -

ViTrox and KIC Establish Cooperation and Connectivity

Aug 16, 2017 -

Inovaxe Is Making Storage SMARTER – Visit Booth #915 at SMTAI

See electronics manufacturing industry news »

Seika Machinery, Inc. to Debut New McDry Products and Features at IPC APEX EXPO news release has been viewed 1155 times

  • SMTnet
  • »
  • Industry News
  • »
  • Seika Machinery, Inc. to Debut New McDry Products and Features at IPC APEX EXPO
SMT Machines

PCB equipment