“Our dummy products are selected with care to be the finest factory quality components and our test boards and kits simulate real-world production,” said Practical Components President Kevin Laphen.
The PACTECH test die are combined with these test boards to provide customers with the ability to test a variety of specs and processes. Both components and test boards are daisy-chained for continuity.
For the Pac2.1-PB184-200-10mm-DC-305 die on the PCB310, there are two rows of seven pads. Additionally, it has 184 bumps and a bump pitch of 200 µm. For the Pac2.3-FA572-200/400-10mm-DC-305 die on the PCB310, there are two rows of seven pads. These components have 572 bumps and a pitch of 200 µm/400 µm.
The Evaluation Board is 6.3 x 3.95", has two layers and is 0.062" thick. Board material is High Temp-Tg and the standard board finish is OSP Entek CU-A-HT. As always, Gerber and X,Y Theta data are available at no charge.
Practical Components is a team of dedicated electronics industry professionals offering value pricing, on-time delivery and superior service to customers. The Practical Components team is ready to provide project assistance in the areas of technical component knowledge, drawings, component land patterns and PCB practice kits.