The Small Part Handling Kit (TV1000-SP8-BD) is for parts as small as 250 microns. This general-purpose vacuum handling tool plugs directly into 110 V 50/60 Hz. The compact unit will handle a wide variety of optics, ball lenses and SMT parts used in the industry today.
Parts as small as 0.010" (0.2 5mm) are handled without damage. Vacuum tweezer eliminates lost parts associated with mechanical tweezer handling. The long-life diaphragm vacuum pump generates up to 10" of mercury with an open air flow of 2.3 lpm. The unit connects to ground automatically with a three-wire power cord.
The STEALTH-VAC ELITE (VVSV-NC-KIT) operates directly on 30 to 50 psi compressed air or nitrogen. The normally closed Stealth-Vac Elite vacuum pen contains a whisper quiet venturi vacuum generator that is activated only when the control button is depressed. This helps conserve factory compressed air when the tool is not in use. The vacuum level can be controlled by adjusting the input pressure.
The normally closed Stealth Vac ELITE Kit is supplied with a set of nine vacuum tip # VCS-9-B, 6' of 1/16" air hose, a 1/8 NPT to 1/16" barb adaptor for the supply line, the vacuum generating handle and a VMB-3 holder for the wand.
PORTA-WAND ELITE (VPWE7000AR-MW8) with PEEK wafer tip VMWT-C handles up to 8" (200 mm) wafers or solar cells. The kit comes complete with a detachable 9.6 V NiMH rechargeable battery pack, an in-stand charger (P/N VPW6000-CHRG) and one wafer tip. The detachable battery pack (VPWE-150) contains the rear exhaust filter for the entire tool to ensure better than Class 1 performance. The battery pack can be recharged when attached to the tool or when separated from the tool. Ideal for handling wafers, solar cells, disk media, flat panels, or any item that has a flat hard surface. A power on indicator flashes when the battery pack needs to be recharged or interchanged with a fully charged battery pack. A PUSH-BUTTON provides easy on/off control with a lock to on position. An intake air filter (VPW6000-FIL-5) is replaceable from the front of the tool.
For more information about any of Virtual Industries advanced equipment, stop by booth 1968 or visit http://www.virtual-ii.com.
About Virtual Industries Inc.
Founded in 1987, Virtual Industries Inc. is headquartered in Colorado Springs, Colo. For more than 20 years, Virtual Industries has been a leading supplier of manual vacuum handling solutions to the world's high-technology firms. The company's patented ESD-safe products are used by CLASS I clean room personnel, electronics assemblers, semiconductor manufacturers, Universities and scientists globally. Virtual Industries' success has come from developing innovative manual vacuum handling tools and pick-up tips based on customer requests and customer feed back. These tools provide customer specific solutions that make assembly and processing operations more productive and ergonomic. For more information, visit the company at http://www.virtual-ii.com.