SMT, PCB Electronics Industry News

What's happening at Everett Charles Technologies in 2008?

Mar 25, 2008

As a company we always pay close attention to the Telecommunications Handheld Market. The handheld market will certainly be the backbone for our universal grid sales in 2008. Some of the most complex PCB technology we see is comprised in cell phone designs. More than half of our universal automated grids are currently utilized for handheld PCB testing. Our LM800 Octal Density machine is designed and marketed for HDI cell phone technology. Though we have seen only a handful of designs that are beyond our Picomat Quad Density capability, we see customer technology roadmaps with shrinking line and space geometries that are right in the wheelhouse for Octal density. Until the release of the LM800, many HDI manufactures were forced to use expensive fixture technology to address density. The LM800 now gives the industry a very cost effective universal fixture technology while fulfilling density needs for years to come. We look forward to a bright future with the LM800 platform, as we can market to the technology curve of the booming Telecom market.

We see a huge opportunity for us in the package and flex market. Historically, we approached this market with our traditional 16 head flying prober. Testing Flip Chip and CSP technology demands high accuracy and no witness marks. We knew to effectively meet the demands of package market, a new probe head design was essential. With the introduction of the S1, we can show a speed nearly double to the nearest competitor while achieving industry acceptable witness marking. The S1, with eight probes heads simultaneously testing package panels, is already warranting attention. We feel that the S1 will be especially suited for the package markets within Korea, Japan and Taiwan.

In an effort to reduce pre-mature failures of a PCB, we see many manufactures adding more stringent requirements to existing electrical test protocol. In 2008 we are cognizant of a growing market for ��Value Added Testing.�� The latter term refers to additional test methods that PCB manufactures can employ to increase user life of their product. One key example is utilizing Four Wire or Kelvin Based Testing. Kelvin measurement allows the user to measure resistance values well below 1 Ohm. In the Atg/LM prober a user can specify testing down to 1 mOhm resistance. The latter test will measure the true resistance of the trace by placing a shielded current and voltage source at each end of the network. One additional example of Value Added Testing is called Latent Defect Testing. A technique originally created by IBM, Latent Defect Testing uses Ohmic heating to measure voids, mouse bites or neck downs within a trace.

Under standard test protocol the latter flaws would go un-detected. These flaws could turn into pre-mature failures in the PCB�s final application. n summary, atg/LM will give our global customer additional test tools to make them more valuable to their end customer.

Dec 12, 2017 -

ECT’s Switch Probes: Cost-Efficient Solutions for Testing Electronic Assemblies

Apr 23, 2014 -

Everett Charles Technologies Brings the Latest Advances in Electrical Testing to DMEDS

Jan 14, 2014 -

ECT to Introduce High-Performance Radial Connectors at ATX/MD&M West

Jan 07, 2014 -

ECT Releases High-Performance Radial Connectors

Nov 20, 2013 -

ECT Offers ZIP® Z0 and Z1 Contacts in HyperCoreTM Base Material

Oct 11, 2013 -

ECT to Showcase Electrical Test Products and Services at Productronica

Sep 17, 2013 -

ECT Technical Expert to Discuss Breakthrough PCBA Test Probe Technologies at SMTAI 2013

Sep 12, 2013 -

ECT to Bring Compliant Connector Solutions to SMTAI 2013

Aug 12, 2013 -

New Compliant Connector Solutions from ECT at ITC 2013

Mar 29, 2013 -

ECT to Exhibit at the Del Mar Electronics & Design Show

63 more news from Everett Charles Technologies »

Jun 18, 2018 -

About the creation of communication standards to enable machine to machine cooperation in SMT lines by ELS

Jun 18, 2018 -

Online SMT Auction July 5th – July 11th, 2018

Jun 17, 2018 -

SMT Nuremberg Pays Off for Europlacer & Speedprint.

Jun 17, 2018 -

Libra Industries’ Christopher R. Howell Memorial Foundation Awards $22,500 in Scholarships during Annual Golf Outing

Jun 17, 2018 -

New Low-Temperature Solder Paste from SHENMAO

Jun 17, 2018 -

Jeremy Zhou Appointed to China Regional Sales Manager for VJ Electronix, Inc.

Jun 17, 2018 -

IPC’s PCB Technology Trends Study Underway, OEM Survey Open Until July 6

Jun 17, 2018 -

Join Scienscope this Week at the SMTA Upper Midwest Expo

Jun 17, 2018 -

IPC Hand Soldering Regional Qualification Competition Winner Crowned at SMT Hybrid Packaging 2018

Jun 17, 2018 -

DDM Novastar Welcomes New Director of Engineering

See electronics manufacturing industry news »

What's happening at Everett Charles Technologies in 2008? news release has been viewed 6 times

Manufacturing Software

Plasma Prior to Conformal Coating