SMT, PCB Electronics Industry News

Adept Technology, Inc. Reports Second Quarter Fiscal 2008 Results

Feb 07, 2008

LIVERMORE, Calif.-Feb. 7, 2008-Adept Technology, Inc. (NASDAQ:ADEP) a leading provider of vision guided robotics today announced financial results for its fiscal 2008 second quarter, ended December 29, 2007.

Revenues for the second quarter of fiscal 2008 increased 30% to $14.4 million, compared to $11.1 million for the same period last year, and up 5% from $13.7 million in the previous quarter. Net income increased 400% sequentially from the first quarter of 2008 to $1.5 million, or $0.18 per share for the second quarter of fiscal 2008, versus a net loss of $2.6 million, or $0.34 per share, for the second quarter of fiscal 2007.

Gross margin was 50.4% of revenue in the second fiscal quarter of 2008, compared with 35.1% of revenue in the second fiscal quarter of 2007 and 53.5% in the first quarter of fiscal 2008. Gross margin in the second quarter of 2008 was positively affected by record European revenues including sales of Quattro, incremental software licensing revenue, and lower product manufacturing costs as a result of the Company's ongoing cost reduction activities. These factors were offset by lower margin product mix and an increase to warranty reserves.

Operating expenses decreased 9% in the second quarter of 2008 to $6.0 million, compared with operating expenses of $6.6 million in the same quarter of fiscal 2007. Operating income was $1.3 million in the second quarter of fiscal 2008, compared with an operating loss of $2.7 million in the second quarter of fiscal 2007.

Adjusted EBITDA was $2.1 million in the second quarter of fiscal 2008, compared with adjusted EBITDA of $(2.0) million in the second quarter of fiscal 2007 and adjusted EBITDA of $1.1 million in the first quarter of fiscal 2008. A discussion of this non-GAAP measure and reconciliation of this measure to the applicable GAAP measure is included below.

Adept's cash and short-term investment balance at December 29, 2007 was $12.4 million, an increase of 25% from $9.9 million at September 29, 2007.

"The strong results of the quarter and fiscal year to date clearly reflect success in our efforts to reduce expenses and leverage our financial model," said Robert Bucher, chief executive officer of Adept Technology. "In addition, we continued to capitalize on the growing traction we are experiencing in our target vertical markets of Packaging, Life Sciences, Disk Drive and Semiconductor/Solar, enabling us to meet and in some cases exceed, certain key operational and financial objectives. We are seeing increased demand for our Cobra and Viper robots in Europe and improved vertical market demand in the United States. We recognized our first revenues from Quattro, which targets high-speed applications across our target verticals. And, significantly, we booked record orders of over 400 robots including 130 Quattro robots during the quarter."

Highlights of the quarter include:

  • 80% year over year growth in Robotics segment revenues, including record sales from Europe;

  • Packaging and Solar orders exceeded $7.5 million during the quarter;

  • Expansion of Adept's global distribution network to over 20 companies

Adept acquired Cerebellum on January 2, 2008 and Cerebellum operations will be included in the next fiscal quarter results.

Fiscal 2008 Outlook

Updating its previous guidance from its first quarter press release dated November 7, 2007, for fiscal 2008 as a whole, the Company expects revenues to increase to between $52.0 million and $57.0 million, which is growth of 5% to 15% from fiscal 2007 levels. The Company further expects to record net income of $1.8 million to $2.3 million and adjusted EBITDA of $3.7 million to $4.5 million, and to be cash flow positive. Given the strong results of its fiscal second quarter, the Company currently expects its financial performance for fiscal 2008 as a whole will be at the higher end of this updated guidance.

Conference Call and Simultaneous Webcast

Robert Bucher, Chief Executive Officer, John Dulchinos, President and Lisa Cummins, Vice President and Chief Financial Officer, will host an investor conference call today, February 7, 2008, at 5:00 P.M Eastern Time to review the Company's financial and operating performance for the fiscal 2008 second quarter. The call can be accessed by dialing (877) 857-6161, and giving the pass code "4911957." Participants are asked to call the assigned number approximately 10 minutes before the conference call begins. In addition, the conference call will be available over the Internet at in the Investor Relations section of the site. For those who are not available to listen to the live broadcast, the call will be archived at and a telephonic playback of the conference call will also be available for five days following the call. Replay listeners should call 888-203-1112 and use CODE No. "4911957" to access a replay of the call.

About Adept Technology, Inc.

Adept Technology, Inc. designs, manufactures and markets robotic systems, motion control and machine vision technology for global markets including automotive, consumer electronics, consumer goods, disk drive, food, industrial tooling, medical devices, and pharmaceutical. Adept robots, controllers, and software are used for small parts assembly, material handling and packaging. Adept intelligent automation product lines include industrial robots, configurable linear modules, machine controllers for robot mechanisms and other flexible automation equipment, machine vision, and systems and applications software. Founded in 1983, Adept Technology is the largest U.S.-based manufacturer of industrial robots. More information is available at

All trade names are either trademarks or registered trademarks of their respective holders.

About Non-GAAP financial measures

In addition to presenting net income in accordance with GAAP, we have determined that adjusted EBITDA, which we define as earnings before interest income, income taxes, depreciation and amortization, and stock-based compensation expense under SFAS No. 123(R), is a relevant measure of performance for our company as an approximate measure of operating cash flow, as it is a metric commonly used among technology companies and provides meaningful supplemental information regarding our operating performance. As a result, we believe it is a helpful tool for communicating our performance to our investors and analysts and for comparisons to other companies within the technology industry.

Adjusted EBITDA should be considered in addition to, but not as a substitute for, other measures of financial performance reported in accordance with accounting principles generally accepted in the United States. For more information on our adjusted EBITDA, please see the table captioned "Reconciliation of Adjusted EBITDA Calculation to GAAP Accounting" included below. While we believe that adjusted EBITDA is useful within the context described above, it is in fact incomplete and not a measure that should be used to evaluate the full performance of the Company or its prospects. Stock-based compensation has been and will continue to be for the foreseeable future a recurring expense for our business and an important incentive component of executive and other employee compensation. Such evaluation needs to consider all of the complexities associated with our business including, but not limited to, how past actions are affecting current results and how they may affect future results, and how regulations and the other aforementioned items affect the final amounts that are or will be available to shareholders as a return on their investment. Net income determined in accordance with GAAP is the most complete measure available today to evaluate all elements of our performance. Similarly, our Consolidated Statement of Cash Flows, as presented in our filings with the Securities and Exchange Commission, provide the full accounting for how we have decided to use resources provided to us from our customers and shareholders.

Mar 06, 2013 -

Adept Technology Appoints Glenn Hewson as Senior Vice President of Global Marketing

Jan 21, 2013 -

Lynx Creates New Category of Material Handling Automation

Jan 17, 2013 -

Adept Technology Introduces Simplified Robotic Parts Feeding Solution

Oct 24, 2012 -

Adept Technology Introduces SmartController EX

Oct 09, 2012 -

Adept Technology Introduces Cobra(TM) Refurbishing Program

Sep 12, 2012 -

Adept Technology Appoints Cornerstone Technical Group as Distributor in Southeastern United States

Sep 12, 2012 -

Adept Technology Appoints Cornerstone Technical Group as Distributor in Southeastern United States

Sep 05, 2012 -

Adept Technology Products Selected to Automate Leading Semiconductor Foundry

Aug 21, 2012 -

Adept Technology to Announce Fiscal 2012 Fourth Quarter and Year End Financial Results

Aug 08, 2012 -

Adept Technology Introduces ClamPAC™ Robotic Packaging Automation Cell for Case Packing Clamshells

56 more news from Adept Technology Inc. »

May 25, 2018 -

Saelig Introduces LoRa/FSK Smart Modem Transceiver For Long Range Control

May 25, 2018 -

Allchips won 10 million of A Round Investment in January 2018

May 24, 2018 -


May 24, 2018 -


May 24, 2018 -

CyberOptics Demonstrates Advanced Airborne Particle Sensing Technology at SEMICON West

May 23, 2018 -

Koh Young, the 3D Inspection Market Leader, Reports Strong Quarterly Results Again

May 22, 2018 -

Metcal Is Reinventing Hand Soldering – Learn More at the SMTA Upper Midwest Expo

May 22, 2018 -

Europlacer to Show Full Assembly Line Products & Solutions at SMT Nuremberg.

May 22, 2018 -

IPC Releases Additional Test Coupons for the IPC-2221B Gerber Coupon Generator Test Coupons provide structural integrity verification based on current printed board design technology

May 22, 2018 -

Specialized Coating Services Hosts Successful Open House for New Billerica Facility

See electronics manufacturing industry news »

Adept Technology, Inc. Reports Second Quarter Fiscal 2008 Results news release has been viewed 971 times

Jetting Pump for Integration

Selective Conformal Coating System