SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • Leica And GiveMePower Present World�s First Laser-Powered Wireless CAD Solution At AIA 2004 National Convention In Chicago

Leica And GiveMePower Present World�s First Laser-Powered Wireless CAD Solution At AIA 2004 National Convention In Chicago

Jun 10, 2004

NORCROSS, Georgia and LAS VEGAS, Nevada – Leica Geosystems

(SWX:LGSN) and GiveMePower Corporation (OTCBB:GMPW) today begin

presenting PowerCAD® SiteMaster™ at the American Institute

of Architects 2004 National Convention and Design Expo in Chicago.

PowerCAD SiteMaster is a new mobile and wireless field solution

which automates the creation of wireless, laser-generated as-built

floor plans, area estimates, and building inspections for architects,

appraisers, contractors, engineers, estimators, installers, realtors

and other professionals involved in the design, construction and

management of buildings.

Improving job efficiencies as much as 1,000%

over manual “measuring

tape and paper” methods, PowerCAD SiteMaster uses precise

measurements from a wireless Leica DISTO™ Plus laser to automatically

create richly detailed as-built floor plans and construction drawings

on a Windows® Pocket PC, Handheld PC or Tablet PC. Drawings

are generated to professional architectural CAD standards, and

include complete as-built site information with extended detailing,

accurate room areas and dimensions, and on-site inspection observations

including digital photographs and hands-free VoiceNOTE™ audio

recordings.

For maximum efficiency, results can be saved in AutoCAD® file

formats and sent directly from the jobsite to customer or company

office locations via email or wireless data transfer.

AIA 2004

convention attendees can view a live demonstration of PowerCAD

SiteMaster at Leica’s booth # 1048 after 4PM on

Thursday June 10, and during published exhibit hours on Friday

June 11 and Saturday June 12.

Leica and GiveMePower have agreed

to jointly market PowerCAD SiteMaster through Leica’s network

of authorized DISTO™ distributors

and dealers, as well as authorized PowerCAD Vertical Market Solution

resellers located throughout North America. Buyers can also select,

specify and place orders directly online at http://www.disto.com and http://www.givemepower.com.

About Leica Geosystems

Leica Geosystems (SWX:LGSN) is the world’s

leading supplier of comprehensive products and solutions for the

capture, modeling and visualization of spatial data. Based in Heerbruug,

Switzerland, the company has wholly-owned sales organization in

19 countries around the world, with representative in over 120

countries.

About GiveMePower Corporation

GiveMePower develops, markets, and supports affordable, high-performance mobile, wireless and desktop graphics software for end-users and OEM business partners involved in design, construction, manufacturing, mapping and related industries. A Microsoft Mobile Solutions and Windows® Embedded Partner, an Intel® PCA Developer Network member and an IBM Business Partner, GiveMePower is the first company to offer full-featured 2 and 3-dimensional, AutoCAD®-compatible design and digital blueprint processing for desktop and laptop PCs, as well as the latest mobile and wireless Windows CE®, Windows CE. NET® and Windows Mobile™ equipped Pocket PCs, Pocket PC cell phones, Smartphones, tablet PC’s, handheld PC’s and industry specific devices. For more information, call 1-888-97-POWER or visit http://www.givemepower.com.

All trademarks property of their respective owners. Copyright ©2004 GiveMePower Corporation. All rights reserved.

For more information, contact:

Mr. Matthew Miles

Leica Geosystems

4855 Peachtree Ind. Blvd., Ste. 235

Norcross , CA 30092

Ph: (770) 447-6361

Fax: (770) 447-0710

e-mail: matthew.miles@leicaus.com

http://www.disto.com

Sapphire Lucas

GiveMePower Corporation

Toll Free: 888-97-POWER

Tel: 403-287-6001

Email: media@givemepower.com

Investor Inquiries:

Tel: 866-666-5172 or 888-977-6937

Email: ir@givemepower.com

With the exception of historical information, the

matters discussed in this press release are "forward looking" statements

that involve a number of risks and uncertainties. The actual

future results of the Company could differ from those statements.

Factors that could cause or contribute to such differences include,

but are not limited to, the continued demand for the Company's

products and services, worldwide economic conditions, changes

in governmental regulations and policies, the emergence of competitive

products and services, unforeseen technical issues and those

risk factors contained in the Company's filings with the SEC.

We respect your privacy. If you wish

to be removed from our e-mail list please reply to this email with the subject

line UNSUBSCRIBE, and you will be removed from future mailings. This

message is sent in compliance with the email bill section 301, under Bill S. 1618

TITLE III.

Dec 13, 2005 -

Clark Nexsen Standardizes On GiveMePower Mobile and Wireless Field Solution After Completing US Navy Base Project 250% Faster

Dec 13, 2005 -

Clark Nexsen Standardizes On GiveMePower Mobile and Wireless Field Solution After Completing US Navy Base Project 250% Faster

Sep 15, 2005 -

GiveMePower Corporation In Final Beta Testing For New PowerCAD� SiteMaster� 2 Mobile and Wireless Building Surveying Solution

Aug 03, 2005 -

GiveMePower Technologies Help McDonald�s Meet New Government-Imposed Deadlines For Enhanced Public Safety and Security In The UK

Mar 12, 2004 -

GiveMePower And IBM Partner With Intel At CeBIT 2004

Apr 25, 2003 -

GiveMePower Introduces Real-Time On-Site CAD Mapping

Apr 08, 2003 -

Spatial Announces GiveMePower Corporation As New ACIS Enabled Partner

Jan 21, 2003 -

GiveMePower Extends Lead In Mobile CAD With New PowerCAD� CE Release

Jan 09, 2003 -

Pocket PC Magazine Feature Article - PowerCAD Brings Workstation Power To The Pocket PC

Dec 03, 2002 -

PowerCAD and PowerCAD CE Development is Free for AutoCAD Developers

10 more news from GiveMePower Corp. »

Jul 19, 2017 -

Digicom Electronics Receives AS9100:2016 (RevD) Aerospace and ISO 9001:2015 Certifications

Jul 19, 2017 -

Conecsus Presents SMT Metals Waste Recycling Solutions at SMTAI 2017

Jul 19, 2017 -

New Metcal HTD Tips & Hand-piece Increase Throughput and Save Money

Jul 19, 2017 -

Altus Supports Bespoke Desktop Robots for Automated Soldering, from ATN Germany

Jul 19, 2017 -

STI Acquires Fischerscope X-ray XDAL 237

Jul 19, 2017 -

COT Reduces Prices on SMT Nozzles & Consumables

Jul 19, 2017 -

Cogiscan Partners with iBASEt for Automated Electronics Assembly

Jul 19, 2017 -

International Wafer-Level Packaging Conference (IWLPC) Program Announced and Registration Now Open

Jul 19, 2017 -

Logic PD Appoints Eric Wilkowske as Vice President of Products, Design & Engineering

Jul 18, 2017 -

ASSEMBLY-TECH LLC to Represent PDR Americas

See electronics manufacturing industry news »

Leica And GiveMePower Present World�s First Laser-Powered Wireless CAD Solution At AIA 2004 National Convention In Chicago news release has been viewed 992 times

  • SMTnet
  • »
  • Industry News
  • »
  • Leica And GiveMePower Present World�s First Laser-Powered Wireless CAD Solution At AIA 2004 National Convention In Chicago
Manufacturing Software

 Reflow System