SMT, PCB Electronics Industry News

Revive Your Dispenser with Advanced Dispense Technologies

Dec 09, 2016

PCD dispense technology enhances dispense processes that require fluids ranging from very low viscosity, such as water, to thick pastes up to 80,000 cps. Semi-abrasive fluids can be handled by the PCD Volumetric Pump because it pushes fillers through the pump rather than grinding them.

PCD dispense technology enhances dispense processes that require fluids ranging from very low viscosity, such as water, to thick pastes up to 80,000 cps. Semi-abrasive fluids can be handled by the PCD Volumetric Pump because it pushes fillers through the pump rather than grinding them.

This div will be replaced by the JW Player.

No drip or drool across a wide range of fluid viscosities (low-to-mid and low-to-high) with GPD Global PCD Pumps for total control of your dispensing fluids.

GPD Global, a manufacturer of precision fluid dispensing systems for high-volume 24/7, low-volume/high-mix, and R&D production, offers advanced dispense pump technologies to upgrade your existing platform and take advantage of existing capital equipment. Retrofit your system with innovative dispensing technology for excellent dispense control and repeatability.

Advanced pump technologies available for retrofitting include: True Volumetric Pump, Precision Auger Pump, and Simplified Jetting Pump.

GPD Global's True Volumetric Pump is based on Progressive Cavity Dispense Technology. It accommodates a wide range of fluid viscosities - from water to mid-viscosity (65,000 cps) pastes. With a completely sealed system, these pumps do not drip nor drool. Volumetric pumps ensure the success of applications like underfill, LED encapsulation, solder mask, silicones, conductive ink, conformal coatings, and more. Three PCD pump models are available for integration into your system with small or large volume requirements. The smallest model dispenses volumes down to 0.5 μl, while the largest model dispenses at rates up to 16 ml/min. With the ability to program the controller in terms of volume or on/off mode, process set up and integration are a snap. Retrofit a Volumetric PCD Pump into your system to simplify the dispense process as well as improve throughput and yield.

Precision Auger Pump Integration provides your process development with a wide range of functionality. The advanced Precision Auger Pump expands solder paste dispensing to include 01005 with our newest auger design. With wetted parts machined from carbide, the auger/cartridge assemblies can withstand abrasive thermal pastes and damming fluids. With an intuitive touch screen controller that incorporates closed loop motion control, programming the pump and obtaining reliable dispensing has never been easier. This auger pump guarantees success when dispensing these fluids: abrasive thermal gel, conductive adhesive, dam and fill, gasketing, and more. Retrofit this outstanding auger technology into your platform to increase productivity.

The NCM5000 Jetting Pump simplifies jetting to its basic elements: hammer, pin, and nozzle. Only the pin and nozzle are wetted. This translates into easy set up, cleaning, and operation. The pump can be disassembled for cleaning in a matter of seconds. The drive system, being pneumatic, is designed for reliable, high speed operation, and can be serviced in the field when required. Wavy or uneven product surfaces do not affect the jetting pump because dispensing is typically performed 2 to 3 mm above the surface. By eliminating z axis motion and incorporating high speed pump operation, throughput is greatly increased. The NCM5000 is compatible with a wide range of fluids: UV curables, SMT glue, Underfills, LED encapsulants, and more. The NCM5000 Jetting Pump is now available for integration into your system for more effective dispensing.

Revive your existing dispense platform by retrofitting a cutting edge dispense pump. This is an easy process; all you need is the Integration Kit. Call +1 (970) 245 0408 today for a free consultation to improve the repeatability, accuracy, and productivity of your dispense process.

GPD Global is an equipment manufacturer of high-quality, precision, automated fluid dispensing and component-prep systems. The company is an international, state-of-the-art equipment supplier for the PCB assembly and semiconductor industries. It designs and manufactures a variety of automatic fluid dispense systems, as well as manufactures an SMT Cover Tape Peel Tester and Component Prep equipment for Thru-Hole applications. GPD Global is committed to offering premium service to its customers and has sales and customer support affiliates located throughout the world, including North America, South America, Europe, the Middle East and Asia-Pacific.

Feb 12, 2018 -

NEW Benchtop Dispensing Robot!

Nov 07, 2017 -

Conformal Coating System For Under $40,000!!!

Oct 02, 2017 -

Latest Dispense Technology for Integration and Retrofit

Sep 07, 2017 -

Conformal Coating & the Latest Dispense Technology at SMTAI

Aug 19, 2017 -

See Latest Dispense Technology Demonstrations From GPD Global at NEPCON 2017

Jul 10, 2017 -

East Coast Demo Center for Conformal Coating System!

Jun 14, 2017 -

2-Part Mixing is now Volumetric Dispensing!

May 03, 2017 -

Consistent Fluid Supply & Uniform Fluid Dispensing

Apr 11, 2017 -

Largest Dispensing Platform in the Industry

Mar 09, 2017 -

GPD Global Launches NEW Conformal Coating System

41 more news from GPD Global »

Mar 22, 2018 -

Nordson ASYMTEK's Helios™ SD-960 Series Automated Dispensing System dispenses medium and bulk volume deposits of single- (1K) and two-component (2K) fluids and supports highly abrasive

Mar 22, 2018 -

Thermaltronics Celebrates a Decade of Success

Mar 22, 2018 -

Milwaukee Electronics Purchases Two X-SPECTION 6000 X-ray Systems

Mar 22, 2018 -

Metcal brings innovative benchtop soldering systems to NEPCON China

Mar 22, 2018 -

Reed Exhibitions Hosts Successful Luncheon for Mexican Reps

Mar 22, 2018 -

Tetsuro Nishimura Earns IPC Distinguished Committee Service Award

Mar 22, 2018 -

IPC Urges Trump Administration to Take Measured Approach in Levying Higher Tariffs on Electronics from China

Mar 22, 2018 -

SCS to Exhibit Its MIL-I-46058 Qualified Parylene Conformal Coatings at DSA

Mar 22, 2018 -

CalcuQuote to Exhibit at SMTA Dallas Expo and Tech Forum

Mar 21, 2018 -

CAMI Research to Host Professional Development Workshops at EWPT Expo, Milwaukee

See electronics manufacturing industry news »

Revive Your Dispenser with Advanced Dispense Technologies news release has been viewed 1064 times

boost underfilling speed

SMT Machines china