SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • Viscom Enables Greater CCI Inspection Range with HighDensity Module

Viscom Enables Greater CCI Inspection Range with HighDensity Module

Sep 29, 2016

Inspection system S3088 CCI .

Inspection system S3088 CCI .

Viscom now offers a HighDensity module in addition to standard camera equipment for inspecting conformal coatings in electronics production. This is the better choice, particularly where silicone or especially thin coatings need to be reliably inspected. The new HighDensity module will be on display in Stand A1.217 at electronica, scheduled to take place Nov. 8-11, 2016 at the Messe München.

There are two options for the orthogonal camera technology of the well-proven inspection system S3088 CCI from Viscom: While the integrated standard module has more than fulfilled most of the demands for a long time, the new HighDensity module is recommended when nano plasma coatings need inspection. Also, it is ready to inspect the extremely temperature resistant silicone-based coatings that are used, for example, to make smartphones resistant to moisture.

Among its other features, the HighDensity module is distinguished by special high-power LEDs which are attached around the camera. Their ultraviolet light (black light) with special wavelengths clearly extends the field of application of the S3088 CCI and provides optimum illumination even for weakly fluorescing coating types.

Peter Krippner, Vice President of Serial Products at Viscom AG, stated: "With this configuration of the S3088 CCI, the customer has absolute versatility. All current inspection tasks can be reliably accomplished." Just as with the standard orthogonal sensor module, the HighDensity module can also be additionally equipped with four or eight angled cameras. With this configuration, the quality of the coating layer can also be inspected on the sides of the components with no further effort.

In conformal coating inspection (CCI), special LEDs illuminate coatings that are mixed with particles that fluoresce under UV light. The coating layer typically fluoresces in blue under this excitation. With the right frequency adjustments, all typical defect sites are reliably detected. The Viscom inspection system S3088 CCI finds defects such as air bubbles, contamination or missing coatings dependably, and ensures the guaranteed high quality of the conformal coating on the electronic assemblies.


Viscom AG develops, manufactures and sells high-quality inspection systems. The portfolio encompasses the complete bandwidth of optical and X-ray inspections. In the area of assembly inspection for electronics manufacturing, the company is among the leading suppliers worldwide. Viscom systems can be configured specifically to the customer and can be interlinked. The company headquarters and manufacturing location is in Hanover, Germany. With a wide network of branches, applications centers, service support points and representatives, Viscom is represented internationally. Founded in 1984, since 2006 Viscom has been listed on the Frankfurt Stock Exchange (ISIN: DE0007846867). For additional information: www.viscom.com

Nov 21, 2017 -

Optimized inspection system operation with vVision 2.4

Nov 15, 2017 -

Viscom’s S3088 SPI inspection system wins Global Technology Award

Oct 12, 2017 -

Viscom at productronica with outstanding solutions for 3D AOI and 3D AXI

Oct 12, 2017 -

Viscom presents powerful 3D AOI and SPI with ultra-modern data exchange for Industry 4.0 at SMTA Guadalajara

Sep 27, 2017 -

New inspection simulator offers inspection expertise already in the planning phase

Sep 20, 2017 -

Viscom AG adopts Valor Process Preparation solution for electronics manufacturing efficiency

Sep 18, 2017 -

ACE electronics invests in high-quality 3D inspection

Sep 18, 2017 -

Viscom record earnings confirm success track

Aug 23, 2017 -

The Hermes Standard: Viscom working on first field tests

Aug 16, 2017 -

High-Performance 3D AOI from Viscom at SMTAI

92 more news from Viscom AG »

Dec 07, 2017 -

Nordson ASYMTEK Receives 2017 Global Technology Award for the NexJet NJ-8 Jetting System with ReadiSet 2-piece Jet Cartridge Award presented at Productronica 2017

Dec 07, 2017 -

Banner Engineering Completes Implementation of Optel Software on ASM Lines in Minneapolis and Suzhou (China)

Dec 06, 2017 -

Pan Pacific Microelectronics Symposium Program Finalized

Dec 05, 2017 -

Scienscope Promotes Don Jeka to National Sales & Marketing Manager for Its X-ray Division

Dec 05, 2017 -

Super Thin Dry Film Negative Photoresist for MEMS and Wafer-Level Packaging

Dec 05, 2017 -

Indium Corporation’s Vareha-Walsh to Present at International Electronic Recycling Congress (IERC) 2018

Dec 04, 2017 -

SCS to Discuss How Ultra-Thin Conformal Coatings Increase the Reliability of Critical Electronics during PennWell Webinar

Dec 04, 2017 -

Anda Automation Expands into Hungary

Dec 04, 2017 -

Ersa Congratulates IPC Hand Soldering Competition Champions

Dec 04, 2017 -

IPC Optimistic After U.S. Senate Passes Tax Reform Bill

See electronics manufacturing industry news »

Viscom Enables Greater CCI Inspection Range with HighDensity Module news release has been viewed 398 times

  • SMTnet
  • »
  • Industry News
  • »
  • Viscom Enables Greater CCI Inspection Range with HighDensity Module
Next generation soldering station - Metcal

IPC Training & Certification - Blackfox