SMT, PCB Electronics Industry News

Rework, Inspect, Solder and Reflow with Ersa at SMTAI

Aug 29, 2016

The HR 550 hybrid rework system.

The HR 550 hybrid rework system.

Kurtz Ersa North America, a leading supplier of electronics production equipment, is pleased to announce that it will exhibit in Booth #1034 at SMTA International, scheduled to take place September 27-28, 2016 at the Donald Stephens Convention Center in Rosemont, IL. Ersa’s team will demonstrate the HR 550 Rework system, Ersa Mobile Scope, i-CON VARIO 4 and Smartflow 2020.

The HR 550 hybrid rework system addresses all users with the highest requirements in terms of precision and process safety in electronic assembly rework applications. The system features a 1,500 W high performance hybrid heating element to desolder and solder SMT components up to 70 x 70 mm. A 2,400 W infrared bottom heater in three heating zones guarantees homogeneous bottom-side preheating of the complete assembly.

The Ersa Mobile Scope has been designed for optical inspection and digital image recording including measurements of solder joints on Ball Grid Array (BGA), μBGA, CSP and Flip-Chip packages. Further applications are top-view inspection of PCB lands, solder paste prints or the optical inspection of components on printed circuit boards in Surface Mount Technology (SMT) or in Trough Hole Technology (THT). The device can be used in quality control, production, laboratories or R&D departments.

The i-CON VARIO 4 offers whisper-quiet air and vacuum generation for up to four simultaneously operating soldering and de-soldering tools. The station ensures highly efficient processing of all SMT and THT soldering tasks. In addition to the 200W i-Tool AIR S, it offers the i-Tool Universal Soldering Device, the THT De-soldering X-tool Iron, and the Ultra-Fine De-soldering Chip Tool VARIO (2 x 40W).

Due to its universal pallet fastening, the Smartflow can handle PCB sizes of up to 508 x 508 mm [20” x 20”]. With the Smartflow 2020, ERSA finally closes the gap from its high-end Versaflow platform to an entry level machine. In all process steps, the automatic Smartflow system uses the same successful and proven Ersa Selective Soldering Technology as the large Ersa VERSAFLOW systems without compromising quality and accuracy. The Smartflow 2020 selective soldering system requires less than 3 m² of space, thus fitting optimally into cell production environments.

For more information about Kurtz Ersa North America, visit www.ersa.com.
 

Aug 14, 2017 -

Visit Kurtz Ersa in Booth #335 at SMTA International

Aug 10, 2017 -

Electronic Systems, Inc. Invests in Ersa’s VERSAFLOW 3/45 Selective Solder System to Meet Diverse Customer Needs

Aug 01, 2017 -

Ernie Grice Celebrates 15 Years as VP of Sales – North America at Kurtz Ersa

Jun 28, 2017 -

Ersa Versaflow Level II Application Training Course

Jun 26, 2017 -

Ersa to Hold Versaflow 3 Level II Maintenance Training Course

Jun 25, 2017 -

Ersa Brings the ‘Little Big One’ to SMTA Ohio – Award-Winning Selective Solder

Jun 01, 2017 -

Compact selective soldering without compromises from Ersa at SMTA Upper Midwest

May 30, 2017 -

VP Pence Introduced to Ersa’s Technologically Advanced Selective Soldering System during Recent Visit to Dynalab, Inc.

May 25, 2017 -

Ersa Address All Users with the Highest Precision & Safety Rework Requirements at SMTA Empire Expo

May 23, 2017 -

Luis Lujan Appointed as District Sales Manager for the Ersa Machines Division for the Maquiladora Territory in MX

158 more news from kurtz ersa Corporation »

Aug 16, 2017 -

ViTrox and KIC Establish Cooperation and Connectivity

Aug 16, 2017 -

Inovaxe Is Making Storage SMARTER – Visit Booth #915 at SMTAI

Aug 16, 2017 -

COT Increases Manufacturing Capability with New DMG Horizontal Milling Centers

Aug 16, 2017 -

High-Performance 3D AOI from Viscom at SMTAI

Aug 16, 2017 -

Innovative Bench-top Soldering Equipment from Metcal at SMTAI

Aug 16, 2017 -

ADLINK Introduces MVP-6010/6020 Series of Expandable Fanless Embedded Computers with Four Expansion Slots

Aug 16, 2017 -

SMTA Capital Expo to Feature Essemtec Fox Pick and Place System

Aug 16, 2017 -

All-in-One Low-cost, Scalable Functional test, In-System Programming, Boundary Scan / JTAG, In-Circuit Test System from Acculogic Visit Booth #133 at SMTA International

Aug 16, 2017 -

PDR’s New IR Thermal Test System Thermally Cycles Key Critical Components to Detect Defects

Aug 16, 2017 -

Automated X-ray Inspection with Component Counting from Scienscope at SMTAI

See electronics manufacturing industry news »

Rework, Inspect, Solder and Reflow with Ersa at SMTAI news release has been viewed 332 times

Metcal soldering rework

reflow oven profiler