SMT, PCB Electronics Industry News

How to choose tackifier resins for Non-woven adhesives

May 03, 2016

A report from “MarketsandMarkets” estimated that “The global Non-Woven adhesives market size is to reach USD 2.22 billion by 2020, registering a CAGR of 8.65% between 2015 and 2020, with the global rising demand especially in Asia-Pacific.” “High elasticity, optimum performance, safe products, reduced fluff, and easy-to-use are major drivers for the Non-Woven adhesives market”.

Non-Woven adhesives are used in many applications such as baby care, feminine hygiene, adult incontinence, and others (medical product, pet care, bath tissue, and other small applications). Baby care is the largest one.


Adhesive types for non-woven market

SBC-based adhesives and APAO-based adhesives are two main types of adhesives for Non-woven market.

SBC-based adhesives, the hygiene products uses primarily SBS/SIS-type hot melts for their ability to retain flexibility and elasticity at low temperatures. They are generally the least expensive adhesives, usually have high initial tack strength, while tend to harden (and lose adhesion) over time, especially exposed to sunlight and weather.

> SBS: Styrene-butadiene-styrene
> SIS: Styrene-isoprene-styrene
> SEBS: Styrene-ethylene/butylene-styrene (SEBS), the hydrogenated form of SBS
> SEPS: Styrene-ethylene/propylene-styrene (SEPS), the hydrogenated form of SIS

APAO-based adhesives, Amorphous polyalpha olefins (APAO)-based adhesives are non-crystalline adhesives that remain soft, tacky, and flexible giving longer open times and good adhesion. It provides better moisture resistance, chemical resistance, heat resistance with especially lower odor and VOCs compared to SBC-based adhesives. The main manufacturers of APAO polymers include Evonik, Eastman, REXtac and Qida Chemical.


How to choose the right tackifier

Tackifier resin is a key raw material in Non-woven adhesives other than base polymers. The performance characteristics of a tackifier resin in a polymer system, are directly related to the compatibility of the tackifier resin with the polymer. One can either employ solubility parameters or other guides to estimate the compatibility of a tackifier with a certain polymer. However, usually trial and error testing is required. Materials that possess similar solubility parameters are generally assumed to be compatible with each other. Image below illustrates the tackfier resin compatibility for SBC's and APAO's.

Foreverest® supply various resins for Non-Woven adhesives (Table 1, especially the extra-light color hydrogenated rosin esters/terpene resins, which were designed for high-performance hot-melt pressure sensitive adhesives (HMPSA) for disposable hygiene market. Key benefits of extra-light color hydrogenated tackfier resins include:

  • Transparent, colorless
  • Little or no skin sensitizing
  • Improved stability and color retention
  • Better aging resistance
  • Less UV absorption

Reference

1. Non-Woven Adhesive Market by Type Global Forecasts to 2020, MarketsandMarkets, Date: 24-Feb-2016, No. of pages: 129
2. Select Styrene Butadiene Copolymer Resin
3. Additive Advances via ASI

May 03, 2016 -

How to choose tackifier resins for Non-woven adhesives

May 03, 2016 -

How to choose tackifier resins for Non-woven adhesives

May 03, 2016 -

How to choose tackifier resins for Non-woven adhesives

May 03, 2016 -

How to choose tackifier resins for Non-woven adhesives

May 03, 2016 -

How to choose tackifier resins for Non-woven adhesives

May 03, 2016 -

How to choose tackifier resins for Non-woven adhesives

Feb 22, 2018 -

KIC demonstrates smart factory technologies with IPC CFX communication at APEX

Feb 22, 2018 -

MicroCare Offers Higher Performance Critical Cleaning Solutions at IPC APEX Booth #2909

Feb 22, 2018 -

Latest Conference Proceedings Now Available in SMTA Knowledge Base

Feb 22, 2018 -

Scienscope to Exhibit Flexible X-ray Component Reel Counter at productronica China

Feb 22, 2018 -

IPC Issues Position Paper on Priorities for an Ambitious EU Industrial Policy Strategy Supports skills gap closure, R&D incentives and strong IP protection

Feb 22, 2018 -

Data Logging: Intelligently and Efficiently

Feb 22, 2018 -

KDPOF Enables Seamless Optical Networks Integration

Feb 22, 2018 -

XJTAG Announces DFT Assistant for Zuken CR-8000 PCB design suite

Feb 21, 2018 -

Joseph Stockunas, Nordson Corporation Corporate VP, Appointed to SEMI Foundation Board of Trustees

Feb 21, 2018 -

VJ Electronix Hires Industry Expert to Continue Strengthening Global Sales and Services

See electronics manufacturing industry news »

How to choose tackifier resins for Non-woven adhesives news release has been viewed 501 times

StikNPeel™ Rework Stencils

Metcal soldering rework