SMT, PCB Electronics Industry News

CableEye® Micro-Match™ Connector Board, CB49

Mar 09, 2016

Rated to 500Vdc/350Vac, the CB49 may be used on all CableEye models

Rated to 500Vdc/350Vac, the CB49 may be used on all CableEye models

CAMI Research Inc. (Acton, MA) announces a new board for its CableEye cable and harness testing systems. Populated with solder pads to accept a suite of TE-Connectivity™ Micro-MaTch connectors, the board addresses markets plagued by vibration and fretting corrosion, and requiring “miniaturized connectivity”.  Rated to 500Vdc/350Vac, the CB49 may be used on all CableEye models.

Configuration

A leader in development of PC-based Cable & Wire Harness Test Systems for over 20 years, CAMI offers the CableEye suite of Low and High Voltage products complete with accessories including connector boards. The selection of boards is constantly growing and is currently numbering over 60 – most of which are populated with ‘families’ of connectors. These connectors are shown graphically correct with CableEye’s standard dynamic user interface.

The CB49, sold without connectors, contains nine sets of 20 solder pads accommodating numerous configurations of Micro-MaTch connectors. There are nine preset locations for automatic detection & display of 4, 6, 8, 10, 12, 14, 16, 18, and 20-pin connectors  (as denoted by screenprinted labels). Yet, any single set may be fitted with any combination of lower pin count connectors that total to 20 or less (e.g. a 14-pin with a 4-pin). Connectors soldered in non-preset positions will also appear graphically correct once they are mapped with PinMap™ (optional software).

Sold as a set of two boards, each Micro-MaTch test board may be paired with other CableEye adapter boards to accommodate any combination of connectors.

Application

Customers requiring this board typically have products that endure vibration for which connectors would normally be at risk of fretting corrosion failure e.g. products for Robotics and for Domestic, Commercial & Industrial Vehicular (Radios, Navigation Systems, Dashboard Systems) markets.

Warranty

Connector boards are included in CableEye’s standard, renewable one-year warranty of the tester for which it was purchased.

Availability & Domestic US Pricing

Available immediately, a CB49 set is $195 (Item 779).

Contact sales@camiresearch.com or (978) 266-2655 for a quote.

Note: Prices are USA only and subject to exchange rates, freight and import costs. Contact your local authorized distributor for local pricing.


CAMI Research produces expandable and upgradable diagnostic Cable & Harness Test Systems for assembly, prototyping, production, and QC of standard or custom cables. CableEye® Testers display, and document basic electrical properties such as continuity, resistance, dielectric breakdown, insulation resistance, miswires, and intermittent defects. camiresearch.com

Aug 01, 2017 -

CableEye® USB Type-C Test Fixture, CB26U

Jul 27, 2017 -

CAMI Research Releases CableEye® USB Type-C Test Fixture, CB26U

Mar 16, 2017 -

CAMI Research Re-Releases Continuity-Testing Video Tutorial Series

Feb 28, 2017 -

CAMI Research to Host Continuity & HiPot Testing Seminar & Training Sessions at WPT Expo, Milwaukee

Feb 24, 2017 -

CableEye® 4-Wire Calibration Verification Board, CB52

Oct 11, 2016 -

CableEye® Generic Surface Mount & TH Board, CB51

Jul 21, 2016 -

CAMI Research, a WHCC Top Product Winner, Reports Milestone Continuity Measurement

May 04, 2016 -

CAMI Research, a WHCC Top Product Winner, Issues New Catalog

Apr 06, 2016 -

CableEye® 2100Vdc Screw Terminal Connector Board, CB29H

Feb 05, 2016 -

CableEye® Tester Calibration Verification Board, CB50 - Takes the Guesswork out of Scheduling Calibration

8 more news from CAMI Research Inc. »

Sep 21, 2017 -

Logic PD Sponsoring, Exhibiting at American Medical Device 2017

Sep 20, 2017 -

Viscom AG adopts Valor Process Preparation solution for electronics manufacturing efficiency

Sep 20, 2017 -

COT Announces PB Swiss Tools’ Two New INSIDER Models: INSIDER STUBBY and INSIDER STUBBY RATCHET

Sep 20, 2017 -

New IPC Studies Show World PCB Market Up in 2016 as North American Market Shrinkage Slows World PCB Production and Annual North American PCB Industry Reports Released

Sep 20, 2017 -

ADLINK Technology invites clients to join the MEC Congress 2017

Sep 19, 2017 -

ASC International to Highlight 3D AOI/SPI Innovations at SMTA International

Sep 19, 2017 -

MicroCare Presents Radically Innovative ‘Greener’ Cleaning Fluid at Parts2Clean Stuttgart Hall 3 Stand A46

Sep 19, 2017 -

Aegis Software’s FactoryLogix a major step on Melecs journey towards Industry 4.0

Sep 19, 2017 -

IPC Invites Industry Leaders to Submit Poster Abstracts for IPC APEX EXPO 2018 in San Diego

Sep 19, 2017 -

SCS Webinar to Address the Use of Parylene for Increased Reliability

See electronics manufacturing industry news »

CableEye® Micro-Match™ Connector Board, CB49 news release has been viewed 1086 times

Non-heated dispensing system

Capillary Underfill process