SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • DEN-ON INSTRUMENTS, CO., LTD. Japan Advances Rework Technology without Major Cost Increase

DEN-ON INSTRUMENTS, CO., LTD. Japan Advances Rework Technology without Major Cost Increase

Oct 26, 2015

DEN-ON INSTRUMENTS, CO., LTD. is pleased to announce new improvements to its long-standing RD500 Series Rework Station. The RD500V series is now higher powered and comes with added profiling features that have evolved the system into an even easier to use and very intuitive machine for engineering and operator use.

Component packages and PCBs continue to develop into more complex designs, including ball grid arrays, BGAs, MSMDs and surface mount technologies. New advanced technology equipment, capable of handling the removal and rework of these designs is critical to electronics manufacturing production. DEN-ON INSTRUMENTS, CO., LTD. of Japan has built a reputation over the last 50 years for its high quality repair equipment in the SMT industry driven by new technology demands.

The new advanced RD-500V series rework systems feature semi-automated single axis placement and a reflow station for BGA/SMT, that combined with its existing design, leads to higher-performance, higher-powered three-point hybrid heating system and advanced control technology, designed for safe lead-free and eutectic rework applications. Available in two models, the new efficiently powered RD-500V series now features a three-stage heating system that produces up to 5.6 KW (large model) overall thermal output, an increase of 40 percent over the older RD500 series model, giving the RD500V series sufficient thermal capacity with well managed control to execute precise profiles on small to very large scale, complex, multilayered circuit boards (PCBs) up to 500mm x 700 mm.

The capabilities of the rework station allow for some of the more difficult to profile packages, such as metal shielded, ceramic (CCGA), thermal heat sink devices, plastic column BGAs (PBGA) and 01005 devices. These unique profiles are obtained by the localized top and bottom hot gas heaters and the bottom area array fast acting infra-red (IR) heating system that provide safe and uniform heating throughout the board. The new higher magnification – high resolution digital optics provide quick and easy parts placement, accurate to within +/- 0.015 mm. This is very important for component sizes such as 01005 and the now upcoming smaller devices.

Additionally, the proven technology low air flow design heaters eliminate the need for variable flow rate adjustments. Finally, the RD-500V series features new micro-controlled stepper motor driven automated pick-and-place with feedback control of the part placement force for more accurate part placement after rework.

For more information about the improvements to the RD500V Series, please contact contact Raymond LaFleur at raymond.lafleur@denondic.co.jp or visit www.denondic.co.jp, or contact Tim Cappoen with Seika Machinery, USA at tim@seikausa.com.


The company was first founded under the name of DEN-ON Corporation on September 19, 1963. It was established with the purpose of research, development and design of sound systems for studios and music halls. After that, it became involved in the broader area of sound and music control boards and other similar systems. In 1982, a significant portion of the company became involved in the soldering and desoldering industry and the company then changed its name to DEN-ON INSTRUMENTS to more appropriately match the new direction of the company. It was at this point that DIC Trading was established as a separate company to handle all the sales, marketing and promotion activities of the company.

Oct 20, 2016 -

DEN-ON INSTRUMENTS Honors Its Longest Employee

Feb 07, 2016 -

PXI Signs Agreement for Sub-distribution of DEN-ON INSTRUMENTS Legacy Products under Seika Machinery

Dec 20, 2015 -

DEN-ON INSTRUMENTS, CO., LTD. Appoints Distributor in Malaysia

Dec 13, 2015 -

DEN-ON INSTRUMENTS, CO., LTD. to Show Its Rework Product Line at NEPCON Japan

Oct 21, 2015 -

DEN-ON INSTRUMENTS, CO., LTD. Will Exhibit the 7th Model Series RD-500SV Rework Station at productronica

May 20, 2018 -

BTU to Show PYRAMAX and Profile Guardian at SMT/Hybrid/Packaging

May 20, 2018 -

Viscom Presents Advanced Inspection Solutions for ‘Smart Factory’ at SMT Hybrid Packaging 2018

May 20, 2018 -

MIRTEC Europe to Exhibit at SMT/Hybrid/Packaging 2018

May 20, 2018 -

SHENMAO America to Participate in the eSMART Factory Conference

May 20, 2018 -

CyberOptics Presents Best-Practices for Reducing Reticle Haze in Semiconductor Scanners at the European Mask and Lithography Conference

May 20, 2018 -

Aegis Software and CalcuQuote Partner to Offer MES and RFQ Management Solution

May 20, 2018 -

Electrica Ltd. Purchases Mirtec’s MV-3 OMNI to Further Improve Quality Standard

May 20, 2018 -

Pickering Interfaces Releases Updated and Lite Versions of its Signal Routing, Software Switch Path Manager

May 18, 2018 -

YINCAE’S SMT 158A Receives High Praise

May 18, 2018 -

Solderstar to Exhibit at SMTA Michigan Expo & Tech Forum

See electronics manufacturing industry news »

DEN-ON INSTRUMENTS, CO., LTD. Japan Advances Rework Technology without Major Cost Increase news release has been viewed 749 times

  • SMTnet
  • »
  • Industry News
  • »
  • DEN-ON INSTRUMENTS, CO., LTD. Japan Advances Rework Technology without Major Cost Increase
TWEEZER-VAC ELITE Vacuum SMD Tweezer Kit

Metcal soldering rework