ViTrox Technologies, a solutions provider of innovative, advanced and cost-effective automated vision inspection systems and equipment for the semiconductor and electronics packaging industries, will exhibit in Booth #201 at the IPC APEX EXPO, scheduled to take place Feb. 24-26, 2015 at the San Diego Convention Center in California. ViTrox will debut the new V810 S2 EX 3D In-line AXI and demonstrate the V510 Optimus 3D AOI. Additionally, ViTrox will launch new VVTS (ViTrox Verification Tool Solution) and VDSPC SPC Tools that are compatible with 5DX and Intelligent Link.
V810 S2 EX 3D In-line Advanced X-Ray Inspection System (AXI)
V810 S2 EX is able to inspect boards up to 482 x 609mm (10 percent larger than the S2) and provides the best support on the market for boards up to 7mm thick and 4.5kgs. The board top clearance of V810 S2 EX is enhanced with 50 mm and bottom clearance of 70mm. The inspection area of the system is improved up to 18.7' x 24'.
V810 S2 EX features Scan Path Merging (SPAM) state-of-art new technology that can reduce the inspection time and hardware scanning path. Single Unified Management Office (SUMO) uses an 8-core processor with 128GB of RAM that accelerates the system to its optimum level of performance. Simultaneous Efficient Reconstruction Technique (SERT) and a new 64bit imaging processor architecture combine Predictive Slice Height (PSH) into a single scanning path. Phase Shift Profilometry 2 (PSP 2) boosts the projection and image acquisition speed up to 10 times faster using an in-house proprietary projector. PSP 2 improves accuracy and test coverage on 100 percent pressfit and PTH boards.
Additionally, V810 S2 EX is coupled with the ViTrox Verification Tool Solution (VVTS), which is equipped with SPC capability for reviewing and verifying inspection results and images.
V510 Optimus 3D AOI
V510 Optimus 3D AOI's system uses 2D + 3D Inspection concurrently to achieve high productivity and high detectability. It boasts capabilities that are unmatched by other existing solutions in the market. The system is able to detect various types of challenging defects, such as Lifted Lead, Coplanarity, Black color PCB / Multicolor PCB, Presence / Absence, small components like 01005/ 0201 and many others. V510 Optimus 3D AOI is coupled with structured lighting for 2D illumination with multiple color LEDs. The revolutionary multi-angle multi-color illumination capability allows multiple images to be acquired for each view.
The robust design of V510 Optimus 3D AOI is able to cater for multi-platform requirements, allowing mix-and-match combinations with AOI in XL, XXL, Dual Lane and Flexible Dual Lane models. The V510 Optimus 3D AOI comes with Dual Lane options, upgradable to XL model for bigger board size inspection, as well as the extended conveyor.
VDSPC and VVTS Compatible with 5DX
Also at the show, ViTrox will introduce the VDSPC advanced SPC Tool and VVTS (ViTrox Verification Tool Solution), and introduce a new one-stop solution for the SMT line that includes the V510 Optimus 3D AOI, plus ViTrox's AXI solution. Each inspection system is connected via ViTrox's proprietary Intelligent Link, coupled with VDSPC, CLD, NOP and 3D VVTS, to form a close-loop feedback and monitoring system with a centralized management method. Intelligent Link will link AOI and AXI together with the objective of to improve the operator disposition experience and further reduce operator headcount.For more information about ViTrox's products and services, visit www.vitrox.com.