SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • IPC Master Instructor, Helena Pasquito, to present “What’s New in IPC J-STD-001F and IPC-A-610F”at the SMTA Capital Chapter Meeting on May 6th

IPC Master Instructor, Helena Pasquito, to present “What’s New in IPC J-STD-001F and IPC-A-610F”at the SMTA Capital Chapter Meeting on May 6th

Apr 17, 2014

Ms. Helena Pasquito

Ms. Helena Pasquito

The SMTA Capital Chapter is pleased to announce its second meeting of 2014 on May 6th, from 5:30 pm until 8 pm at Honeywell, 7000 Columbia Gateway Drive, Columbia, MD 21046. The focus of this chapter meeting will be “What’s New in IPC J-STD-001F and IPC-A-610F” presented by Ms. Helena Pasquito, IPC Master Instructor.

Changes that address evolving manufacturing and soldering technologies featured in Revision F of these key industry standards, IPC J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies, and IPC-A-610 Acceptability of Electronic Assemblies, are addressed.   The new revisions include new SMT termination styles, added hole-fill requirements, training and proficiency requirements.  An overview of Space Amendments and a status of major standards going forward will be presented.

Ms. Pasquito has more than 25 years of industry experience in the field of IPC standards. She is an approved certified IPC Master Instructor with EPTAC Corporation, leading provider of IPC training, for the standards IPC-A-610, IPC J-STD-001, IPC-A-600, IPC/WHMA-A-620, and an EPTAC Master Instructor for Hand Soldering of Wires and Terminals, Through-Hole, Surface Mount soldering as well as Inspection and Crimping Technology in addition she is a certified ISO 9001 Auditor.  Ms. Pasquito is the recipient of the IPC Distinguished Committee Service Award.  She is a member and a regular contributor of several industry associations such as SMTA and ESDA. Ms. Pasquito holds a BS in Business Management and Human Resources Management from New Hampshire University as well as the Six Sigma Green Belt.

The evening is scheduled as follows:

5:30-6:30 pm -  Registration, Networking and Dinner
6:30-7:30 pm -  Presentation: “What’s New in IPC J-STD-001F and IPC-A-610F”.      presented by Helena Pasquito
7:30-8:00 pm -  Q & A

Location:

Honeywell
7000 Columbia Gateway Drive
Columbia, MD 21046
(410) 964-7000


Please join us for this networking, learning and dinner event. The registration fees are $20 for members and $30 for non-members.  Any new member that joins the chapter at this event can attend the next chapter meeting for FREE.

To RSVP, please click on the following link http://www.smta.org/chapters/rsvp.cfm?BEE_ID=3329&BULK_EMAIL_NO=1


30 Years Developing Solutions in Electronics AssemblyThe SMTA membership is an international network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies, including microsystems, emerging technologies, and related business operations.  For more information or to join, please visit www.smta.org.

Sep 19, 2017 -

IPC Invites Industry Leaders to Submit Poster Abstracts for IPC APEX EXPO 2018 in San Diego

Sep 18, 2017 -

Excel Electronics, Inc. Earns IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing

Sep 18, 2017 -

IPC Disappointed by Failure of Negotiated Rulemaking Aimed at Encouraging Recycling of Manufacturing Byproducts

Sep 12, 2017 -

IPC Joins Industry Coalition in Support of U.S. EPA in Litigation over Chemical Safety Act

Sep 11, 2017 -

IPC APEX EXPO 2018 Opening Keynote from Jared Cohen Will Highlight Technology’s Game Changers

Sep 07, 2017 -

Wage and Salary Survey Deadline for North American Electronics Assembly Industry Extended to September 29

Sep 07, 2017 -

IPC Praises Federal Court Decision to End Overtime Rule

Sep 06, 2017 -

Grupo Mirgor First Company in South America to Earn Certification as Qualified Manufacturer to IPC-J-STD-001/610 Recognized as IPC-Trusted Source and QML-Listed

Sep 03, 2017 -

North American PCB Orders Up, Sales Down, Raising Book-to-Bill Ratio

Aug 10, 2017 -

Congressman John R. Carter Discusses Pro-Manufacturing Policies with IPC-member Company, VirTex

849 more news from Association Connecting Electronics Industries (IPC) »

Sep 19, 2017 -

ASC International to Highlight 3D AOI/SPI Innovations at SMTA International

Sep 19, 2017 -

MicroCare Presents Radically Innovative ‘Greener’ Cleaning Fluid at Parts2Clean Stuttgart Hall 3 Stand A46

Sep 19, 2017 -

Aegis Software’s FactoryLogix a major step on Melecs journey towards Industry 4.0

Sep 19, 2017 -

SCS Webinar to Address the Use of Parylene for Increased Reliability

Sep 19, 2017 -

BTU Introduces Profile Guardian Redundant Process Monitor during SMTAI

Sep 19, 2017 -

ADLINK Technology Showcasing Latest Rugged Embedded Railway Solutions at Major European Railway Exhibitions TRAKO, Expo Ferroviaria and Nordic Rail

Sep 18, 2017 -

Seica Inc. participation at SMTAi Schaumburg, Illinois Booth # 315 New Frontiers of Testing -

Sep 18, 2017 -

ACE electronics invests in high-quality 3D inspection

Sep 18, 2017 -

Rework and Professional Soldering from Ersa SMTA Guadalajara Expo

Sep 18, 2017 -

MIRTEC to Exhibit Its Award-Winning MV-6 OMNI 3D AOI System at SMTA Guadalajara

See electronics manufacturing industry news »

IPC Master Instructor, Helena Pasquito, to present “What’s New in IPC J-STD-001F and IPC-A-610F”at the SMTA Capital Chapter Meeting on May 6th news release has been viewed 674 times

  • SMTnet
  • »
  • Industry News
  • »
  • IPC Master Instructor, Helena Pasquito, to present “What’s New in IPC J-STD-001F and IPC-A-610F”at the SMTA Capital Chapter Meeting on May 6th
PCB machines

Facility Closure