SMT, PCB Electronics Industry News

Gen3 Systems to Exhibit with Stannol at productronica

Nov 08, 2013

CM11+ Contaminometer Cleanliness Tester

CM11+ Contaminometer Cleanliness Tester

Gen3 Systems Limited, a specialist manufacturer of test and measurement equipment, announces that it will exhibit with its distributor, Stannol, in Hall A4, Stand 470 at the productronica International Trade Fair, scheduled to take place November 12 - 15, 2013 at the New Munich Trade Fair Centre in Munich, Germany.

Additionally, Gen3 Systems’ CM22 Contaminometer Cleanliness Tester will be fully operational in the “Cleaning and Contamination Testing Center” in Hall A2, Stand 429 during the four-day event. The center will provide practical support to visitors keen to implement new cleaning and contamination monitoring processes as well as overcome reliability failures.

The Gensonic Stencil Cleaning system will be displayed with a 24" stencil frame. The system uses a 40kHz on-contact ultrasonic transducer for high efficiency cleaning of stencil apertures.
The Gensonic can be used either in conjunction with Gen3 stencil cleaning centres or is portable enough to be taken directly to the printer.

The MUST System 3 is the latest technological evolution of the original Multicore Universal Solderability Tester (MUST) that grandfathered all modern solderability test standards. It remains the unquestioned industry benchmark for solderability testing. Capable of measuring down to 0.001mN the MUST is the most accurate and comprehensively equipped test system of its type in the world.

The CM11+ Contaminometer Cleanliness Tester is designed to avoid polarization effects between electrodes as might occur when using DC test currents. The CM Series utilizes a solid gold measuring cell, ballistic amplifier and a vigorous pumping system to achieve superior measurement accuracy of <0.005mS/cm even at very low conductivity values.

The Z-CHECK 3D is a non-contact solder paste precision measuring system; automatic and manual with laser options. The entire range of bench top non-contact measuring systems has been designed to provide accurate pad specific measurement of solder paste deposits, adhesives and component placement.  Each Z-Check machine comes with a full SPC package as standard. 

The Solder-Saver offers companies that use wave soldering the opportunity to instantly recycle dross created in the wave solder pot, thereby saving up to 50 percent in new solder bar purchases. It can be used with leaded, lead-free or unleaded wave soldering machines

Delta T Wizard Thermal Profiling comprises a 5-channel temperature logger and user-friendly software, providing the simplest and most basic data to the most comprehensive SPC demands as the user desires.

The following Gen3 Systems’ principals also will exhibit at the event:

  • Optilia - Hall A2, Booth 166
  • MBTech - Hall A4, Booth 405
  • Finetech - Hall A4, Booth 281
  • DIMA - Hall A2, Booth 459
  • MEK - Hall A2, Booth 403

For more information about Gen3 Systems, stop by Hall A4, Stand 470 during productronica or visit www.gen3systems.com.


Gen3 Systems is a specialist manufacturer of test and measurement equipment used to help predict reliability of electronic circuits and systems in the field. In addition, the company designs and manufactures dip and spray coating process equipment in both in-line and bench-top formats. Following its acquisition of Process Support Products in 2008, Gen3 has become a specialist distributor for several leading equipment manufacturers including, most recently, Global Distribution rights for Aprotec Instrumentation, Solder Paste Inspection (SPI) systems.

Gen3 Systems also provides training, equipment and expertise for manufacturers requiring assessment of their electronic products’ reliability. The company also operates a test service and assists with standards development via both the IPC and IEC. Gen3 Systems operates from premises near Farnborough Business Park, on the M3 corridor and just 30 minutes from London’s Heathrow Airport.

Sep 25, 2017 -

Gen3 Systems newly appointed Distributor for Nordson SELECT Selective Soldering Equipment

Sep 06, 2017 -

Gen3 Systems’ Graham Naisbitt to join the LIVE panel discussions for Cleaning and Cleanliness Testing at SMTAi on Wednesday the 20th September 10am.

Mar 07, 2017 -

Gen3 Systems announces product line up for Southern Manufacturing

Feb 09, 2017 -

Gen3 Systems to Present SIR Intercomparison to Validate the use of a Fine Pitch Pattern

Jan 26, 2017 -

Gen3 Systems to Present Research Conducted with Robert Bosch at Apex

Jan 09, 2017 -

Gen3 Systems will present the NEW, Award-Winning CM Series and AutoSIR/CAF 2 test systems at IPC APEX 2017

Oct 25, 2016 -

Gen3 Systems Appoints Dr. Chris Hunt as Its Chief Technology Officer

Oct 17, 2016 -

British Manufacturer & Distributor Gen3 Systems Launches Revamped Website

Aug 31, 2016 -

Gen3 Systems to Exhibit Its Cleaning & Contamination Systems with Ascentech at SMTAI

Aug 28, 2016 -

Gen3 Systems Installs Temperature & Humidity Test Chamber at Its UK Testing Facility

20 more news from Gen3 Systems »

Dec 15, 2017 -

Sono-Tek Appoints Applications Engineer for Electronics & Advanced Energy Division

Dec 14, 2017 -

Ersa to Hold Versaflow 3 Maintenance Training Course in Mexico

Dec 12, 2017 -

ECT’s Switch Probes: Cost-Efficient Solutions for Testing Electronic Assemblies

Dec 12, 2017 -

NEO Tech Design Team Wins Industry Award for Creative Solutions that Accelerate Time-to-Market

Dec 12, 2017 -

STI Has Accomplished AS9100D Certification

Dec 07, 2017 -

Nordson ASYMTEK Receives 2017 Global Technology Award for the NexJet NJ-8 Jetting System with ReadiSet 2-piece Jet Cartridge Award presented at Productronica 2017

Dec 07, 2017 -

Banner Engineering Completes Implementation of Optel Software on ASM Lines in Minneapolis and Suzhou (China)

Dec 06, 2017 -

Pan Pacific Microelectronics Symposium Program Finalized

Dec 05, 2017 -

Scienscope Promotes Don Jeka to National Sales & Marketing Manager for Its X-ray Division

Dec 05, 2017 -

Super Thin Dry Film Negative Photoresist for MEMS and Wafer-Level Packaging

See electronics manufacturing industry news »

Gen3 Systems to Exhibit with Stannol at productronica news release has been viewed 1320 times

reflow oven profiler

Capillary Underfill process