SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • Indium8.9HFA Solder Paste Sees Accelerated Adoption for Miniaturized Assemblies

Indium8.9HFA Solder Paste Sees Accelerated Adoption for Miniaturized Assemblies

Nov 01, 2013

Indium8.9HFA Solder Paste is part of Indium Corporation's Indium8.9 series of solder pastes. The series was designed to provide multi-faceted performance characteristics, bringing the right balance of solder paste attributes tailored specifically to your manufacturing process.

Indium8.9HFA Solder Paste is part of Indium Corporation's Indium8.9 series of solder pastes. The series was designed to provide multi-faceted performance characteristics, bringing the right balance of solder paste attributes tailored specifically to your manufacturing process.

Indium Corporation's Indium8.9HFA Solder Paste is a versatile, halogen-free, Pb-free, solder paste with leading print performance on miniaturized components. Assemblers and OEMs are adopting this remarkable new product at an accelerating pace.

Print performance is especially critical for manufacturers of mobile phones and other personal electronics devices as they struggle to contend with sub-8 mil challenges associated with continuing miniaturization in the electronics assembly industry.

Indium8.9HFA Solder Paste provides:

  • Low Cost of Ownership & High Print Yields
    • Unsurpassed transfer efficiency for consistent, full volume print deposits (8 mil) results in reduced frequency of insufficients and high first-pass print yields
    • Low print pressure and excellent response-to-pause saves time and money on stencils and line changes
    • Solvent-free dry-wiping reduces costs
  • Increased throughput
    • Higher print speed and reduced wipe frequency enables short cycle time, high up-time, and high throughput printing

"Indium8.9HFA represents the culmination of years of research into optimizing rheological properties to obtain the industry’s best printing solder paste." Dr. Ning-Cheng Lee, Vice President of Technology for Indium Corporation's Research and Development

"The fast ramp of Indium8.9HFA with personal electronics manufacturers is driven by the product’s ability to enable high print yields. Customers really value its high throughput performance. We have not seen adoption rates this fast since the introduction of NC-SMQ92J in 1999.” Tim Jensen, Product Manager for Indium Corporation’s PCB Assembly Materials

Indium8.9HFA Solder Paste is part of Indium Corporation’s Indium8.9 series of solder pastes. The series was designed to provide multi-faceted performance characteristics, bringing the right balance of solder paste attributes tailored specifically to your manufacturing process. Each paste in the series was developed to optimize print performance and mitigate common defects faced by manufacturers of personal electronics, such as QFN voiding, head-in-pillow, and graping.

For more information about Indium8.9HFA or the Indium8.9 series of solder pastes, visit www.indium.com/indium8.9series or email askus@indium.com.


Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, solar, thin-film and thermal management markets. Products include solders, preforms, and fluxes; brazes; sputtering targets; indium, gallium, and germanium metals and inorganic compounds; and NanoFoil®. Founded in 1934, Indium has global technical support and factories located in China, Singapore, South Korea, the United Kingdom, and the USA. For more information about Indium Corporation, visit www.indium.com or email abrown@indium.com.

Aug 30, 2016 -

Indium Corporation Experts to Present at IEMT–EMAP 2016

Aug 09, 2016 -

Indium Corporation Receives ON Semiconductor Award for “Perfect Quality” in 2015

Aug 03, 2016 -

Indium Corporation’s State-of-the-Art Recycling Process Delivers Credit for Solder Pot Dross and Contaminated Solder

Apr 26, 2016 -

Indium Corporation VP of Technology to Host Webtorials May 17 & 19

Apr 22, 2016 -

Indium Corporation Announces Karch as Regional Technical Manager for Germany, Austria and Switzerland

Apr 21, 2016 -

Indium Corporation Expert Presents at SMTA ICSR 2016

Apr 12, 2016 -

Indium Corporation's New Indium10.2HF Solder Paste Delivers Superior ICT Performance

Apr 07, 2016 -

Indium Corporation’s Lasky to Present at Joint SMTA and IMAPS Meeting

Apr 06, 2016 -

Indium Corporation's Indium8.9HF Solder Paste Series Technology Solution to Avoid the Void™

Mar 29, 2016 -

Indium Corporation Names Hults as Global Accounts Manager

240 more news from Indium Corporation »

Aug 19, 2017 -

See Latest Dispense Technology Demonstrations From GPD Global at NEPCON 2017

Aug 17, 2017 -

ZESTRON Americas Announces New Regional Sales Manager

Aug 17, 2017 -

SEHO Soldering Expert to Discuss Resource & Cost Efficient Wave Soldering at SMTAI

Aug 17, 2017 -

Libra Industries Announces Two 20-Year Service Awards in Q2 2017

Aug 17, 2017 -

Cirtronics Installs High-Performance X-ray Inspection Solution

Aug 17, 2017 -

Essemtec to Show New All-in-One Jetting / Placement System at SMTAI

Aug 17, 2017 -

Engineered Material Systems to Introduce New Conductive Adhesives for Stringing and Shingling Next-Generation Solar Modules at EU PVSEC

Aug 17, 2017 -

What is SMT and where to by SMT spare parts

Aug 16, 2017 -

ViTrox and KIC Establish Cooperation and Connectivity

Aug 16, 2017 -

Inovaxe Is Making Storage SMARTER – Visit Booth #915 at SMTAI

See electronics manufacturing industry news »

Indium8.9HFA Solder Paste Sees Accelerated Adoption for Miniaturized Assemblies news release has been viewed 614 times

  • SMTnet
  • »
  • Industry News
  • »
  • Indium8.9HFA Solder Paste Sees Accelerated Adoption for Miniaturized Assemblies
Used PCB Equipment - AdoptSMT

Plasma prior Conformal Coating