SMT, PCB Electronics Industry News

SMT, PCB Electronics Industry News

News from JTAG Technologies B. V.

Preview for JTAG Technologies for the Embedded World, Nuremberg February 26th -28th 2013, Booth 4-617, Hall 4

Dec 28, 2012

Peter van den Eijnden, General Manager, JTAG Technologies

Peter van den Eijnden, General Manager, JTAG Technologies

JTAG Technologies BV (Eindhoven, The Netherlands), a vendor of test and debug tools based on boundary-scan, will showcase the following JTAGLive products as well as brand new systems upgrades in Hall 4, booth 617:


JTAG Technologies is  showcasing at  Embedded World  Autobuzz, a totally unique tool that effectively learns a connectivity signature of all boundary-scan parts within a design from only the BSDL models of those parts. Autobuzz expands the "seek and discover" mode of BuzzPlus and automatically gathers circuit data of a known good board and then performs a full connectivity compare against the faulty circuit. Autobuzz is a useful tool for repair and rework technicians, especially when design data is missing or incomplete.


  • Automatic seek & discover mode
  • Unlimited net compare
  • No CAD data required
  • Quick and simple to use

JTAGLive CoreCommander

By using JTAGlive CoreCommander engineers can activate the on-chip debug modes of a range of popular cores to affect kernel-centric testing.  CoreCommander support includes ARM, Cortex, XScale, PowerPC and TriCore architectures. CoreCommander routines are suitable for diagnosing faults on "dead-kernel" boards in either design debug or repair, since no on-board code is required to set memory reads and writes.

CoreCommander is Python-based and complements the established JTAGLive Script product, allowing
access to mixed-signal parts such as ADCs and DACs and also synchronised testing to full boundary-scan devices. Python-embedded mode uses a similar structure to that featured in the JTAGLive Script product, allowing CoreCommander functions to be embedded into Python code to create re-usable test modules for specific tests.

JTAG Technologies and the Embedded Industry – Comment by Peter van den Eijnden, General Manager M JTAG Technologies

R&D, manufacturing and (field) service repair can all benefit greatly from the possibilities offered by the JTAG interface and logic in today’s modern electronic devices. In manufacturing the main JTAG applications are board test and in-system programming of cPLD’s and flash memories. JTAG Technologies is offering a vast range of high performance products for these manufacturing applications since its beginning.

Also R&D engineers use the JTAG interface for in-system programming of cPLD’s (JTAG Programming) and flash memories. In addition software engineers increasingly use the JTAG interface for debugging their (embedded) software using the emulation / debug logic built-in into modern microprocessors.

Like software debugging also hardware debugging can well be supported via the JTAG interface. JTAG Technologies developed its JTAG Live product family specifically for this purpose. The JTAG Live products enable hardware design engineers to deploy the JTAG test and debug capabilities embedded in various chips for debugging their (prototype) hardware, helping them to verify that connections between pins are present and a processor is capable of writing to and reading from its memory and peripheral devices without writing any specific microprocessor code.

About JTAGLive

JTAGLive is the economic easy-to-use family of board debug tool JTAG Technologies. The original offering for JTAGLive, first introduced in November 2009, comprised of three family members: Buzz, Clip and Script. Last year two new products were added to this family: BuzzPlus and AutoBuzz.

JTAG Technologies is a market leader and technology innovator of boundary-scan software and hardware products and services. The company was the first to bring to the market such important advances as automated test generation, automated fault coverage analysis, automated flash and PLD programming via boundary-scan, and visualized boundary-scan analysis. Its customers include world leaders in electronics design and manufacturing such as Ericsson, Flextronics, Honeywell, Medtronic, Motorola, Nokia, Philips, Raytheon, Rockwell-Collins, Samsung, and Sony. Its innovative boundary-scan products provide test preparation, test execution, test result analysis and in-system programming applications. With an installed base of over 6000 systems worldwide, JTAG Technologies serves the communications, medical electronics, avionics, defence, automotive, and consumer industries with offices throughout North America, Europe and Asia. JTAG Technologies headquarters are located in Eindhoven, The Netherlands. For more information please visit

You must be a registered user to talk back to us.

More News from JTAG Technologies B. V.

Sep 20, 2016 -

JTAG Technologies for SMTA Show Rosemont IL, USA, booth # 136

Sep 05, 2016 -

JTAG Technologies’ Preview for Autotestcon 2016 Booth # 826, Anaheim September 12-15,

Sep 01, 2016 -

Multi-function JTAG Board Tester fits into ECT (Xcerra) Fixtures

Jun 21, 2016 -

Easier test of DIMM sockets with universal JTAG hardware

Jun 19, 2016 -

Easier test of DIMM sockets with universal JTAG hardware

Apr 12, 2016 -

Editors | Preview for JTAG Technologies for Pasadena Spce Text Expo, May 2016, Pasadena Convention Center

Mar 15, 2016 -

In the ramp light in Las Vegas: JTAG Technologies Inside - The future of your ATE application with Boundary-Scan

Feb 08, 2016 -

Preview for JTAG Technologies for Embedded World, Nuremberg Hall 4, booth 578

Jan 04, 2016 -

Press Preview for IPC Apex 2016 – Las Vegas, Booth 2413

Nov 01, 2015 -

Press Preview for IEEE AutotestCon 2015, National Harbor; Maryland, 3- 5 November 2015, Hall 403

(19) more news from JTAG Technologies B. V.

Preview for JTAG Technologies for the Embedded World, Nuremberg February 26th -28th 2013, Booth 4-617, Hall 4 news release has been viewed 701 times

Boundary Scan

SP700avi inline stencil printer