SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • Seika Machinery’s Michelle Ogihara to Attend SMTA Arizona-Sonora

Seika Machinery’s Michelle Ogihara to Attend SMTA Arizona-Sonora

Nov 29, 2012

 Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, announces that Senior Sales Manager Michelle Ogihara will be available to discuss the company’s new, innovative products at the upcoming SMTA Arizona-Sonora Expo & Tech Forum, scheduled to take place on Tuesday, December 4, 2012 from 10 a.m.-5 p.m. at the Fiesta Resort Inn and Conference Center in Tempe, AZ.

Seika’s Solder Paste Recycling Unit enables approximately 90 percent of waste solder paste to be recovered as solder bar. The system provides a major decrease in disposal costs for factory waste, a reduction in CO2 emissions and reduced costs for solder bar as a result of recycling waste. As an additional benefit, the recycling unit enables selection of manual mode and automatic mode using a touch screen panel.
 
Seika also features the Sawa Eco-Roll large roll model that cleans wiper rolls up to 24". The Sawa Eco-Roll eliminates waste and saves money by reusing wiper rolls for printing machines. In addition to providing a reduction in waste, use of the wiper roll cleaner results in reduced CO2 emissions in just 20 minutes. 

The SC-EN20E Sawa Eco-Nozzle Mounter Nozzle Cleaner cleans 20 nozzles at a time. With the system, ultrasonically-vibrated water thoroughly passes through every nozzle opening. Double-cleaning power is generated with ultrasonic-energy cleaning and simultaneous vacuum suction. Nozzle tips and apertures can be cleaned without leaving any residue. The Sawa Eco-Nozzle is compatible with Panasonic, YAHAMA and JUKI nozzles. A wide range of nozzle holders are available to accommodate most mounter manufacturers.

The Seitec Bravo STS-2533 IN H & SJ Soldering System is specially designed for in-line and modular selective soldering. The programmable system features a special nozzle design and a spray fluxer unit, enabling flawless soldering of leads and pads. Additional features include a conveyor with roller, a specially designed solder pot and a drawer-type solder pot. The Bravo STS-2533 from Seitec is the ideal soldering solution for mass production.

The Andes Solbot II Multi-Point Selective Soldering System uses customized and dedicated fixtures/nozzles. The lead-free compatible system is user-friendly and features a compact footprint of only 540x720x250 mm. The Solbot can solder PCBs up to 260x340 mm. Additionally, the number of components on the PCB does not affect tact time.

Seika offers various options for the new McDry Feeder Cabinet line. These include the sliding reel shelves for both the DXU-1002-1000 large size cabinets and the DXU-580AF for smaller quantity storage ideal to be set in the line for prompt access and storage of MSDs on tape feeders.  They offer ergonomic options in both sizes as well as the cart/feeder system in the larger DXU-1002-1000 cabinet. This model provides a versatile solution for dry storage options in that the five standard shelves are part of the package and can be replaced should requirements change.


For more information, stop by the show or visit www.seikausa.com.


Seika Machinery, Inc. (SMI) is a subsidiary of Seika Corporation, Japan and member of the Mitsubishi Global Group. SMI provides electronics manufacturers with advanced machinery, superior materials and engineering services.

May 03, 2017 -

Effectively Test Wetting Balance of Component Leads with the New MALCOM SWB-2 Dip Wetting Tester

Feb 23, 2017 -

Seika Recognizes Top Performing McDry Reps during APEX

Feb 01, 2017 -

New Bubble Washer System for Stubborn Flux Cleans Five Times Faster than Immersion Cleansing

Jan 11, 2017 -

Seika Machinery to Bring New Kawaski Dual Arm SCARA Robot to APEX

Jan 10, 2017 -

New SAWA Ultrasonic Squeegee Cleaner Presents New Solution for Lead-Free Pastes

Jan 09, 2017 -

Explore Industry-Leading Equipment from Seika Machinery at APEX

Sep 12, 2016 -

Seika Machinery to Bring a Modular Reflow Oven Profiling System to SMTA Guadalajara

Sep 08, 2016 -

Attend the SMTA Ambassador Reception during SMTAI

Sep 01, 2016 -

Attend the 7th Annual SMTA Women’s Leadership Program at SMTAI

Aug 30, 2016 -

Seika Announces Special Show Floor Pricing for the Sawa Handy Cleaner and McDry Cabinet at SMTAI

184 more news from Seika Machinery, Inc. »

Jun 28, 2017 -

COT Completes $2 Million Expansion of Its Gainesville, Georgia Manufacturing Headquarters

Jun 28, 2017 -

Ersa Versaflow Level II Application Training Course

Jun 28, 2017 -

SMTA Releases Wave Soldering Online Course

Jun 27, 2017 -

Flying Probe, Functional Test & Inline Test – Visit Acculogic at SMTA Ohio Expo

Jun 27, 2017 -

VJ Technologies and Datest Partner in West Coast Inspection Services, Showroom and Demonstration Center.

Jun 26, 2017 -

Altus get SMART with Koh Young’s Innovative New Software

Jun 26, 2017 -

Ersa to Hold Versaflow 3 Level II Maintenance Training Course

Jun 25, 2017 -

Libra Industries’ Christopher R. Howell Memorial Foundation Awards $20,000 in Scholarships during Annual Golf Outing

Jun 25, 2017 -

SHENMAO Exhibits at IMAPS System in Package June 27-28, 2017 Introducing 3 New Semiconductor Packaging Fluxes

Jun 25, 2017 -

Ersa Brings the ‘Little Big One’ to SMTA Ohio – Award-Winning Selective Solder

See electronics manufacturing industry news »

Seika Machinery’s Michelle Ogihara to Attend SMTA Arizona-Sonora news release has been viewed 559 times

  • SMTnet
  • »
  • Industry News
  • »
  • Seika Machinery’s Michelle Ogihara to Attend SMTA Arizona-Sonora
PCB equipment

PCB machines