SMT, PCB Electronics Industry News

OLED vs LED Lighting

Oct 30, 2012

The latest devolopments in the OLED lighting space will be one of the major topics at the forthcoming Printed Electronics USA 2012 conference & exhibition (www.printedelectronicsusa.com).  The event, being held on December 5-6 in the heart of silicon valley at Santa Clara, CA, USA, focuses on the commercialization of the technology, covering broadly organic, inorganic, thin film and flexible nanotechnologies.

LED Market

It has taken twenty years for LED lighting to reach 8% of the $80 billion global lighting market, appearing in everything from car headlights to home lighting to street lighting. However, compared to the previous years, the foremost rapid growth has slowed down and every possible niche market is fairly populated.

What is the impact on OLED lighting? Will those in OLED lighting achieve efficiencies, yields and lifetimes fast enough before LED becomes ingrained? Printing is already being applied to LED lighting for connectors and even printing LEDs themselves. Others are mounting LEDs on flexible substrates. But will the thermal problems restrict the applicability of LED lighting on flexible substrates, paving the way for OLED lighting there? Who is investing in OLED lighting manufacturing?

OLED Market

Just as it is the case with the LED market the majority of the OLED market is still driven by displays. Compared to that, the OLED lighting market is very much in its infancy, with rather expensive OLED luminares and lamps commercially available as samples or used in design installation, but no mass production is in place, yet. Nevertheless, OLED lighting attracted a lot of interest and investment in the last couple of years and virtually all lighting companies are involved in OLED research and development. If OLED lighting is to suceed in penetrating only a small portion of the global lighting market, revenues could be in the millions. In fact, IDTechEx forecasts a $200-300M annual opportunity for OLED lighting in the next 2-3 years.

What comes next?

The next big topic for OLED lighting R&D is the development of flexible panels resulting in first products by 2015. This is driven by and will benefit from the flexibility trend for OLED displays, which will drive the development of better and cheaper flexible barriers, a key bottleneck for the technology, in the next couple of years. 

Key Challenges

Other key challenges ahead are investment for larger area device manufacturing to lower the panel cost, reduction of material costs (esp. for glass, edge barriers etc), improved yield, the availability of low cost, and differentiated product design and marketing from LED lighting.

Printed Electronics USA 2012

At the forthcoming Printed Electronics USA 2012 event the topic will be discussed in great detail by the following presenters:

Dr Srinivas Sista, Materials Scientist at GE Global Research will talk about OLEDs for Lighting Applications, with focus on improving the performance (Efficiency, Lifetime and Cost) of solution processed OLEDs through device design. GE Global Research is one of the world's most diversified industrial research labs, providing innovative technology for all of GE's businesses. GE Research has been the cornerstone of GE technology for more than 100 years, developing breakthrough innovations in areas such as medical imaging, energy generation technology, jet engines and lighting.

The applicability of Printed Electronics Technologies to OLED lighting will be discussed by Mr Takeo Arai of Konica Minolta, Japan; this includes Konica Minolta's activity in OLED lighting, their world's first all-phosphorescent OLED product, a technical approach to R2R process for OLED lighting, and high-barrier films for printed electronics or flexible OLED. Konica Minolta, a leading company in EP (Electrophotographic Printing) sector, now has industrial inkjet technology as well.

A market forecast for the OLED lighting sector compared to state-of-the-art LED lighting will be given by Dr Norman Bardsley, Consultant on Displays and Organic Electronics at Bardsley Consulting. He will compare large area OLED lighting agains large areas diffuse lighting as well as capital, material and performance of LED vs vacuum processed OLED lighting vs solution processed OLED lighting, and conclude with a LED and OLED lighting forecasts 2013-2023.

Mr Mike Lu, Director OLED Technology at Acuity Brands Lighting, will give an overview of OPLED Luminaire products and application designs.

Related topics discussed at Printed Electronics USA 2012 are Flexible & Bistable Displays, New Progess with Barrier Film, The Future of Transparent Conductors and more. For further information and registration see www.PrintedElectronicsUSA.com

Report on OLED vs LED

You can learn more by referring to the IDTechEx report on "OLED vs LED Lighting - Analysis, Players and Markets".  This report outlines the technological trends in OLED and LED lightings.  It also identifies key areas requiring innovation in order to improve performance and to drive down cost.  Furthermore, this report critically assess the selling points of OLED vs LED lighting on the basis of different parameters including form factor, flexibility, efficiency, cost, emission temperature, etc.  Next, the report examines the value proposition of OLED for different target markets, including various niche segments in the residential, commercial and industrial lighting spaces. Finally, this book paints detailed picture of the OLED and LED value chains, identifying players at every stage.
ENDS - 860 words

IDTechEx Events:

  • Energy Harvesting & Storage USA | Nov 7-8 | Washington DC, USA www.IDTechEx.com/ehUSA
  • Wireless Sensor Networks & RTLS USA 2012 | Nov 7-8 | Washington DC, USA www.IDTechEx.com/WSN
  • Supercapacitors USA 2012 | Nov 7-8 | Washington DC, USA www.IDTechEx.com/Supercapacitors
  • Printed Electronics & Photovoltaics USA 2012 | Dec 5-6 | Santa Clara, USA www.PrintedElectronicsUSA.com
  • Graphene LIVE! | Dec 5-6 | Santa Clara, USA www.IDTechEx.com/Graphene

Jun 26, 2014 -

Supercapacitors and Graphene Overtake Batteries: New Event

Mar 24, 2014 -

World's first flexible multi-functional timer to be distributed at Printed Electronics Europe

Feb 13, 2014 -

The "Tipping Point"

Jan 23, 2014 -

Printed Electronics Conference & Tradeshow - Register by 24 January for a 40% attendee discount.

Jan 16, 2014 -

IDTechEx Predicts New Shapes, Materials and Applications for Supercapacitors

Dec 10, 2013 -

IDTechEx Predicts the Total Hybrid & Pure Electric Vehicles Market will be US$334 Billion by 2023

Oct 21, 2013 -

Printed Sensors, a new focus at Printed Electronics USA

Jun 11, 2013 -

IDTechEx announces Printed Electronics Europe 2014 on 1-2 April

Jun 03, 2013 -

OLED Lighting developments in Japan

May 23, 2013 -

IDTechEx launches online Market Intelligence Portal

11 more news from IDTechEx, Inc. »

Mar 27, 2024 -

Red Glue SMT Solutions: A Cost-Effective Approach for Double-Sided PCBs

Mar 26, 2024 -

North American PCB Industry Sales Down 11.6 Percent in February

Mar 26, 2024 -

iNEMI/IPC White Paper on Complex Integrated Systems Highlights Future Technology and Manufacturing Ecosystem Needs

Mar 26, 2024 -

Don Dennison Appointed to Roll Out KIC's Latest Thermal Analysis System Software in the Northeast

Mar 26, 2024 -

Altus Group Achieves Record Sales Milestone with Koh Young Europe

Mar 26, 2024 -

STI Welcomes Edrick Young as the Newest Mechanical Assembly Technician

Mar 26, 2024 -

Anda Technologies Receives 2024 NPI Award for Setting a New Standard in Smart Manufacturing

Mar 26, 2024 -

ZESTRON's Olaf Schoenfeld, Ph.D. to Participate in EV Special Session at IPC APEX Expo

Mar 26, 2024 -

North American EMS Industry Up 4.1 Percent in February

Mar 26, 2024 -

SMTA Europe Announces 2024 Spring Conferences

See electronics manufacturing industry news »

OLED vs LED Lighting news release has been viewed 785 times

ICT Total SMT line Provider

fluid dispensers