Sep 28, 2012

 IPC  Association Connecting Electronics Industries® announced today the August findings from its monthly North American Printed Circuit Board (PCB) Statistical Program.

PCB Industry Growth Rates and Book-to-Bill Ratios Announced
Rigid PCB shipments were down 0.1 percent in August 2012 from August 2011, and bookings increased 1.3 percent year over year. Year to date, rigid PCB shipments decreased 4.7 percent and bookings increased 1.1 percent. Compared to the previous month, rigid PCB shipments were up 7.2 percent and rigid bookings increased 14.1 percent. The book-to-bill ratio for the North American rigid PCB industry in August 2012 strengthened to 1.02.

Flexible circuit shipments in August 2012 were up 1.7 percent, and bookings were down 14.7 percent compared to August 2011. Year to date, flexible circuit shipments decreased 3.4 percent and bookings decreased 8.5 percent.

Compared to the previous month, flexible circuit shipments increased 0.3 percent and flex bookings were up 13.8 percent. The North American flexible circuit book-to-bill ratio dropped sharply to 0.87, due to weak orders in July and August.

For rigid PCBs and flexible circuits combined, industry shipments and bookings in August 2012 were both flat, with 0 percent growth compared to August 2011. Year to date, combined industry shipments were down 4.6 percent and bookings were up 0.2 percent. Compared to the previous month, combined industry shipments for August 2012 increased 6.6 percent and bookings increased 14.1 percent. The combined (rigid and flex) industry book-to-bill ratio in August 2012 decreased slightly to parity at 1.00.

“Both rigid PCB and flexible circuit orders in August showed solid growth over the prior month, but weak flexible circuit orders over the past two months caused a decrease in the book-to-bill ratio,” said Sharon Starr, IPC director of market research. “Flexible circuit orders tend to be volatile, however, and the August results should not be interpreted as a trend. Based on seasonal patterns, we expect to see a stronger performance in September.”

The book-to-bill ratios are calculated by dividing the value of orders booked over the past three months by the value of sales billed during the same period from companies in IPC’s survey sample. A ratio of more than 1.00 suggests that current demand is ahead of supply, which is a positive indicator for sales growth over the next two to three months.

Book-to-bill ratios and growth rates for rigid PCBs and flexible circuits combined are heavily affected by the rigid PCB segment. Rigid PCBs represent an estimated 90 percent of the current PCB industry in North America, according to IPC’s World PCB Production Report.

The Role of Domestic Production
IPC’s monthly survey of the North American PCB industry tracks bookings and shipments from U.S. and Canadian facilities, which provide indicators of regional demand. These numbers do not measure U.S. and Canadian PCB production. To track regional production trends, IPC asks survey participants for the percent of their reported shipments that were produced domestically (i.e., in the USA or Canada). In August 2012, 82 percent of both rigid PCB and flexible circuit shipments reported by survey participants were domestically produced. These numbers are significantly affected by the mix of companies in IPC’s survey sample, which change slightly in January, but are kept constant through the remainder of the year.

Bare Circuits versus Assembly
Flexible circuit sales typically include value-added services such as assembly, in addition to the bare flexible circuits. In August, the flexible circuit manufacturers in IPC’s survey sample indicated that bare circuits accounted for about 43 percent of their shipment value reported for the month. Assembly and other services make up a large and growing segment of flexible circuit producers’ businesses. This figure is also sensitive to changes in the survey sample, which may occur at the beginning of each calendar year.
Interpreting the Data

Year-on-year and year-to-date growth rates provide the most meaningful view of industry growth. Month-to-month comparisons should be made with caution as they may reflect cyclical effects and short-term volatility. Because bookings tend to be more volatile than shipments, changes in the book-to-bill ratios from month to month may not be significant unless a trend of more than three consecutive months is apparent. It is also important to consider changes in bookings and shipments to understand what is driving changes in the book-to-bill ratio.

The information in IPC’s monthly PCB industry statistics is based on data provided by a representative sample of both rigid and flexible PCB manufacturers in the USA and Canada. IPC publishes the PCB Book-to-Bill Ratio and the PCB Statistical Program Report each month. Statistics for the previous month are not available until the last week of the following month.

IPC (www.IPC.org) is a global industry association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 3,100 member companies which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly and test. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $2.02 trillion global electronics industry. IPC maintains additional offices in Taos, N.M.; Arlington, Va.; Stockholm, Sweden; Moscow, Russia; Bangalore, India; and Shanghai, Shenzhen and Beijing, China.
Editors:  See attached PDF charts.


You must be a registered user to talk back to us.

More News from Association Connecting Electronics Industries (IPC)

Oct 20, 2016 -

Session 4 of IPC & SMTA's Conference to Focus on Ultra-Thin or Nanocoatings

Oct 20, 2016 -

World PCB Production in 2015 Estimated at $58.6 Billion IPC World PCB Production Report Released

Oct 20, 2016 -

Mayim Bialik Chosen as Opening Keynote at IPC APEX EXPO 2017 Industry votes to hear from actress and neuroscientist

Oct 16, 2016 -

IPC Announces New ESD Control Certification Courses on IPC EDGE

Oct 13, 2016 -

IPC & SMTA’s High-Reliability Cleaning & Conformal Coating Conference’s Session 4 to Focus on Customer Cleaning Challenges/Needs

Oct 09, 2016 -

IPC Celebrates 5th Annual Manufacturing Day

Oct 06, 2016 -

Day 3 Keynote to Address Paths to Medical Device Cleanliness

Sep 29, 2016 -

Volunteers Honored for Contributions to IPC and the Electronics Industry Seventy-Five Awards Presented at Fall Standards Development Committee Meetings

Sep 29, 2016 -

IPC and SMTA to Present High-Reliability Cleaning and Conformal Coating Conference

Sep 29, 2016 -

Third Session of the High-Rel Cleaning & Conformal Coating Conference to Focus on Conformal Coating for Class 2 and 3 Electronic Assemblies

(782) more news from Association Connecting Electronics Industries (IPC)

IPC RELEASES PCB INDUSTRY RESULTS FOR AUGUST 2012 news release has been viewed 461 times

SP700avi inline stencil printer

Facility Closure