SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • Seika Machinery to Highlight All New Machines at SMTA Indiana Expo & Trade Forum 2012

Seika Machinery to Highlight All New Machines at SMTA Indiana Expo & Trade Forum 2012

Mar 09, 2012

Seika's Solder Paste Recycling (SPR) machine

Seika's Solder Paste Recycling (SPR) machine

Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, will highlight its new, innovative products at the upcoming SMTA Indiana Expo & Trade Forum, scheduled to take place Tuesday, March 20, 2012 from 10 a.m.-3 p.m. at the Ritz Charles in Carmel, IN.

Seika’s Solder Paste Recycling Unit enables approximately 90 percent of waste solder paste to be recovered as solder bar. The system provides a major decrease in disposal costs for factory waste, a reduction in CO2 emissions, and reduced costs for solder bar as a result of recycling waste. As an additional benefit, the recycling unit enables selection of manual mode and automatic mode using a touch screen panel.

Seika will feature the new Sawa Eco-Roll large roll model that cleans wiper rolls up to 24". The Sawa Eco-Roll eliminates waste and saves money by reusing wiper rolls for printing machines. In addition to providing a reduction in waste, use of the wiper roll cleaner results in reduced CO2 emissions in just 20 minutes. 

The SC-EN20E Sawa Eco-Nozzle Mounter Nozzle Cleaner cleans 20 nozzles at a time. With the system, ultrasonically-vibrated water thoroughly passes through every nozzle opening. Double-cleaning power is generated with ultrasonic-energy cleaning and simultaneous vacuum suction. Nozzle tips and apertures can be cleaned without leaving any residue. The Sawa Eco-Nozzle is compatible with Panasonic, YAHAMA and JUKI nozzles. A wide range of nozzle holders are available to accommodate most mounter manufacturers.

The Seitec Bravo STS-2533 IN H & SJ Soldering System is specially designed for in-line and modular selective soldering. The programmable system features a special nozzle design and a spray fluxer unit, enabling flawless soldering of leads and pads. Additional features include a conveyor with roller, a specially designed solder pot and a drawer-type solder pot. The Bravo STS-2533 from Seitec is the ideal soldering solution for mass production.

The Andes Solbot II Multi-Point Selective Soldering System uses customized and dedicated fixtures/nozzles. The lead-free compatible system is user-friendly and features a compact footprint of only 540x720x250 mm. The Solbot can solder PCBs up to 260x340 mm. Additionally, the number of components on the PCB does not affect tact time.

The new AI-TEC PCB Conformal Coating and Curing System is a patented conformal coating dispenser designed to control both the temperature and viscosity with a circulated pump unit. The system controls coating width with ultra-precision.  The compact, space-saving design features a combined drying (curing) unit. The AI-Tec PCB system features an option for auto changeover and width change, QR code reading, and is server communication ready. Additional features include dual-side coating, tilt, double-head, jet-dispensing and masking. The AI-TEC PCB Conformal Coating and Curing System is customizable depending on customer specifications.

Sep 18, 2017 -

Seika to Participate in SMTA Guadalajara Expo

Sep 10, 2017 -

Michelle Ogihara to Participate in SMTAI Round Table: “High Time to Close the Gender Gap in STEM”

Aug 30, 2017 -

Don’t Miss the SMTA Ambassador Reception during SMTAI

Aug 29, 2017 -

Seika Machinery, Inc.’s Michelle Ogihara to Chair MSD Council Meeting at SMTAI

Aug 26, 2017 -

New Malcom SPS-2000 Solder Paste Mixer at SMTAI

Aug 26, 2017 -

Attend the 8th Annual SMTA Women’s Leadership Program at SMTAI

Aug 15, 2017 -

Seika to Bring the Industry’s Top Manufacturing Equipment to SMTAI

Jun 29, 2017 -

Seika Introduces Sayaka Twin Table PCB Router with Online Camera for Programming

May 03, 2017 -

Effectively Test Wetting Balance of Component Leads with the New MALCOM SWB-2 Dip Wetting Tester

Feb 23, 2017 -

Seika Recognizes Top Performing McDry Reps during APEX

192 more news from Seika Machinery, Inc. »

Sep 21, 2017 -

Logic PD Sponsoring, Exhibiting at American Medical Device 2017

Sep 20, 2017 -

Viscom AG adopts Valor Process Preparation solution for electronics manufacturing efficiency

Sep 20, 2017 -

COT Announces PB Swiss Tools’ Two New INSIDER Models: INSIDER STUBBY and INSIDER STUBBY RATCHET

Sep 20, 2017 -

New IPC Studies Show World PCB Market Up in 2016 as North American Market Shrinkage Slows World PCB Production and Annual North American PCB Industry Reports Released

Sep 20, 2017 -

ADLINK Technology invites clients to join the MEC Congress 2017

Sep 19, 2017 -

ASC International to Highlight 3D AOI/SPI Innovations at SMTA International

Sep 19, 2017 -

MicroCare Presents Radically Innovative ‘Greener’ Cleaning Fluid at Parts2Clean Stuttgart Hall 3 Stand A46

Sep 19, 2017 -

Aegis Software’s FactoryLogix a major step on Melecs journey towards Industry 4.0

Sep 19, 2017 -

IPC Invites Industry Leaders to Submit Poster Abstracts for IPC APEX EXPO 2018 in San Diego

Sep 19, 2017 -

SCS Webinar to Address the Use of Parylene for Increased Reliability

See electronics manufacturing industry news »

Seika Machinery to Highlight All New Machines at SMTA Indiana Expo & Trade Forum 2012 news release has been viewed 770 times

  • SMTnet
  • »
  • Industry News
  • »
  • Seika Machinery to Highlight All New Machines at SMTA Indiana Expo & Trade Forum 2012
PCB machines

SMT Machines