SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • Seika Machinery to Launch New Machines at SMTA Dallas Expo & Tech Forum 2012

Seika Machinery to Launch New Machines at SMTA Dallas Expo & Tech Forum 2012

Jan 30, 2012

Seika’s Solder Paste Recycling Unit enables approximately 90 percent of waste solder paste to be recovered as solder bar.

Seika’s Solder Paste Recycling Unit enables approximately 90 percent of waste solder paste to be recovered as solder bar.

Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, will highlight many new, innovative products at the upcoming SMTA Dallas Expo and Tech Forum, scheduled to take place February 7, 2012, from 10 a.m.-3:30 p.m. at the Richardson Civic Center, in Richardson (Dallas), TX.

Seika’s Solder Paste Recycling Unit enables approximately 90 percent of waste solder paste to be recovered as solder bar. The system provides a major decrease in disposal costs for factory waste, a reduction in CO2 emissions, and reduced costs for solder bar as a result of recycling waste. As an additional benefit, the recycling unit enables selection of manual mode and automatic mode using a touch screen panel.
 
Seika will feature the new Sawa Eco-Roll large roll model that cleans wiper rolls up to 24". The Sawa Eco-Roll eliminates waste and saves money by reusing wiper rolls for printing machines. In addition to providing a reduction in waste, use of the wiper roll cleaner results in reduced CO2 emissions in just 20 minutes. 

Seika also will also introduce several new products:

The SC-EN20E Sawa Eco-Nozzle Mounter Nozzle Cleaner cleans 20 nozzles at a time. With the system, ultrasonically-vibrated water thoroughly passes through every nozzle opening. Double-cleaning power is generated with ultrasonic-energy cleaning and simultaneous vacuum suction. Nozzle tips and apertures can be cleaned without leaving any residue. The Sawa Eco-Nozzle is compatible with Panasonic, YAHAMA and JUKI nozzles. A wide range of nozzle holders are available to accommodate most mounter manufacturers.

The Seitec Bravo STS-2533 IN H & SJ Soldering System is specially designed for in-line and modular selective soldering. The programmable system features a special nozzle design and a spray fluxer unit, enabling flawless soldering of leads and pads. Additional features include a conveyor with roller, a specially designed solder pot and a drawer-type solder pot. The Bravo STS-2533 from Seitec is the ideal soldering solution for mass production.

The Andes Solbot II Multi-Point Selective Soldering System uses customized and dedicated fixtures/nozzles. The lead-free compatible system is user-friendly and features a compact footprint of only 540x720x250 mm. The Solbot can solder PCBs up to 260x340 mm. Additionally, the number of components on the PCB does not affect tact time.

The new AI-TEC PCB Conformal Coating and Curing System is a patented conformal coating dispenser designed to control both the temperature and viscosity with a circulated pump unit. The system controls coating width with ultra-precision.  The compact, space-saving design features a combined drying (curing) unit. The AI-Tec PCB system features an option for auto or manual
changeover and width change, QR code reading, and is server communication ready. Additional features include dual-side coating, tilt, double-head, jet-dispensing and masking. The AI-TEC PCB Conformal Coating and Curing System is customizable depending on customer specifications.

For more information, stop by the show or visit www.seikausa.com.


Seika Machinery, Inc. (SMI) is a subsidiary of Seika Corporation, Japan and member of the Mitsubishi Global Group. SMI provides electronics manufacturers with advanced machinery, superior materials and engineering services.

Aug 15, 2017 -

Seika to Bring the Industry’s Top Manufacturing Equipment to SMTAI

Jun 29, 2017 -

Seika Introduces Sayaka Twin Table PCB Router with Online Camera for Programming

May 03, 2017 -

Effectively Test Wetting Balance of Component Leads with the New MALCOM SWB-2 Dip Wetting Tester

Feb 23, 2017 -

Seika Recognizes Top Performing McDry Reps during APEX

Feb 01, 2017 -

New Bubble Washer System for Stubborn Flux Cleans Five Times Faster than Immersion Cleansing

Jan 11, 2017 -

Seika Machinery to Bring New Kawaski Dual Arm SCARA Robot to APEX

Jan 10, 2017 -

New SAWA Ultrasonic Squeegee Cleaner Presents New Solution for Lead-Free Pastes

Jan 09, 2017 -

Explore Industry-Leading Equipment from Seika Machinery at APEX

Sep 12, 2016 -

Seika Machinery to Bring a Modular Reflow Oven Profiling System to SMTA Guadalajara

Sep 08, 2016 -

Attend the SMTA Ambassador Reception during SMTAI

186 more news from Seika Machinery, Inc. »

Aug 19, 2017 -

See Latest Dispense Technology Demonstrations From GPD Global at NEPCON 2017

Aug 17, 2017 -

ZESTRON Americas Announces New Regional Sales Manager

Aug 17, 2017 -

SEHO Soldering Expert to Discuss Resource & Cost Efficient Wave Soldering at SMTAI

Aug 17, 2017 -

Libra Industries Announces Two 20-Year Service Awards in Q2 2017

Aug 17, 2017 -

Cirtronics Installs High-Performance X-ray Inspection Solution

Aug 17, 2017 -

Essemtec to Show New All-in-One Jetting / Placement System at SMTAI

Aug 17, 2017 -

Engineered Material Systems to Introduce New Conductive Adhesives for Stringing and Shingling Next-Generation Solar Modules at EU PVSEC

Aug 17, 2017 -

What is SMT and where to by SMT spare parts

Aug 16, 2017 -

ViTrox and KIC Establish Cooperation and Connectivity

Aug 16, 2017 -

Inovaxe Is Making Storage SMARTER – Visit Booth #915 at SMTAI

See electronics manufacturing industry news »

Seika Machinery to Launch New Machines at SMTA Dallas Expo & Tech Forum 2012 news release has been viewed 734 times

  • SMTnet
  • »
  • Industry News
  • »
  • Seika Machinery to Launch New Machines at SMTA Dallas Expo & Tech Forum 2012
Used PCB Equipment - AdoptSMT

PCB machines