SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • Meet Seika Machinery at the 2012 IPC APEX Expo for a Glimpse into Its World Renowned Storage Cases and Equipment

Meet Seika Machinery at the 2012 IPC APEX Expo for a Glimpse into Its World Renowned Storage Cases and Equipment

Jan 21, 2012

McDry Feeder Cabinet

McDry Feeder Cabinet

Solder Paste Recycling (SPR) machine

Solder Paste Recycling (SPR) machine

Sawa Eco-Roll SC-ER360 wiper roll cleaner.

Sawa Eco-Roll SC-ER360 wiper roll cleaner.

Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, will showcase its proven, advanced machinery in Booth #2401 at the upcoming IPC APEX Expo, scheduled to take place February 28 - March 1, 2012 at the San Diego Convention Center in California.

Seika Machinery offers various options for the new McDry Feeder Cabinet line for easy dry storage and reconditioning of tape and reel MSDs on feeders and faster operation on the floor for pick-and-place machines. These include the RFID MSL tracking capability, sliding reel shelves for both the DXU-1002-1000 large size cabinets and the DXU-580AF for smaller quantity storage ideal to be set in the line for prompt access and storage of MSDs on tape feeders.

Seika offers ergonomic options in both sizes as well as the cart/feeder system in the larger DXU-1002-1000 cabinet. This model provides a versatile solution for dry storage options in that the five standard shelves are part of the package and can be replaced should requirements change.

 Seika’s new Solder Paste Recycling machine enables 100 percent of the metal content of waste solder paste to be recovered as solder bar. The system provides a major decrease in disposal costs for factory waste, a reduction in CO2 emissions and reduced costs for solder bar as a result of recycling waste.

Seika will feature the new Sawa Eco-Roll large roll model that cleans wiper rolls up to 24". The Sawa Eco-Roll eliminates waste and saves money by reusing wiper rolls for printing machines. In addition to providing a reduction in waste, use of the wiper roll cleaner results in reduced CO2 emissions in just 20 minutes.

Wiper rolls are widely used for under stencil cleaning to wipe off solder paste in the SMT printing process. Most of them are used only once, then are disposed of with other solder waste.  Recycling wiper rolls not only reduces emissions but also reduces lumber usage. In addition, tests have shown that repeated cleaning of wiper rolls does not compromise the performance when cleaning stencil apertures.

Seika also will highlight the new Sawa Ecobrid handheld and fully automatic low-VOC emission stencil cleaner. The cleaner provides up to a 66 percent reduction in CO2 emissions, as well as a huge reduction in running costs. Additionally, the system cleans and dries in just five minutes

Also on display, the Seitec Bravo STS-2533 IN H & SJ Soldering System is specially-designed for in-line and modular selective soldering. The programmable system features a special nozzle design and a spray fluxer unit, enabling flawless soldering of leads and pads. Additional features include a conveyor with roller, a specially-designed solder pot and a drawer-type solder pot. The Bravo ST-2533 from Seitec is the ideal soldering solution for mass production.

For more information, meet company representatives in Booth #2401 at the show or visit www.seikausa.com.


Seika Machinery, Inc. (SMI) is a subsidiary of Seika Corporation, Japan and member of the Mitsubishi Global Group. SMI provides electronics manufacturers with advanced machinery, superior materials and engineering services.

Nov 07, 2017 -

Register for the SMTA Silicon Valley Expo

Oct 30, 2017 -

McDry Offers Ultra-Low Humidity Storage for the Automotive and Fiber Optics Industries

Oct 24, 2017 -

IC Packages and LEDS Can Be Stored in a Dry Storage Cabinet for Indefinite Floor Life

Oct 02, 2017 -

SMTAI Round Table: “High Time to Close the Gender Gap in STEM” Recording Available Now

Sep 18, 2017 -

Seika to Participate in SMTA Guadalajara Expo

Sep 10, 2017 -

Michelle Ogihara to Participate in SMTAI Round Table: “High Time to Close the Gender Gap in STEM”

Aug 30, 2017 -

Don’t Miss the SMTA Ambassador Reception during SMTAI

Aug 29, 2017 -

Seika Machinery, Inc.’s Michelle Ogihara to Chair MSD Council Meeting at SMTAI

Aug 26, 2017 -

New Malcom SPS-2000 Solder Paste Mixer at SMTAI

Aug 26, 2017 -

Attend the 8th Annual SMTA Women’s Leadership Program at SMTAI

196 more news from Seika Machinery, Inc. »

Nov 24, 2017 -

Speedprint Picks Up Global SMT Industry Award for its S-Track Traceability Package.

Nov 24, 2017 -

SHENMAO America, Inc. exhibits at local SMTA Exhibition at Bestronics, San Jose, CA Facility on November 29 - Introduces 2 new Solder paste formulations.

Nov 23, 2017 -

BTU to Discuss New Process Monitor at SMTA Silicon Valley Expo

Nov 21, 2017 -

Optimized inspection system operation with vVision 2.4

Nov 20, 2017 -

Count On Tools Inc. Receives 2017 Industry of the Year Award

Nov 20, 2017 -

Cogiscan and MIRTEC announce partnership for Industry 4.0

Nov 20, 2017 -

Libra Industries’ Robert Brandt Elevated to IEEE Senior Member

Nov 17, 2017 -

Altus on the Road to Digital Factory of the Future

Nov 17, 2017 -

MicroCare Wins Prestigious Global Technology Award at Productronica 2017

Nov 17, 2017 -

Mycronic and Aegis renew partnership – FactoryLogix software to be embedded with MY700

See electronics manufacturing industry news »

Meet Seika Machinery at the 2012 IPC APEX Expo for a Glimpse into Its World Renowned Storage Cases and Equipment news release has been viewed 1079 times

  • SMTnet
  • »
  • Industry News
  • »
  • Meet Seika Machinery at the 2012 IPC APEX Expo for a Glimpse into Its World Renowned Storage Cases and Equipment
PCB equipment

Electronics Equipment Consignment