SMT, PCB Electronics Industry News

IPC RELEASES PCB INDUSTRY RESULTS FOR JULY 2011

Sep 06, 2011

Trends in the Book-to-Bill Ratio for Rigid PCBs

Trends in the Book-to-Bill Ratio for Rigid PCBs

Trends in the Book-to-Bill Ratio for Flexible Circuits

Trends in the Book-to-Bill Ratio for Flexible Circuits

Trends in the Book-to-Bill Ratio for Rigid PCBs and Flexible Circuits Combined

Trends in the Book-to-Bill Ratio for Rigid PCBs and Flexible Circuits Combined

Rigid and Flexible PCB Shipments Year-on-Year Growth Rates

Rigid and Flexible PCB Shipments Year-on-Year Growth Rates

IPC - Association Connecting Electronics Industries® announced the July findings from its monthly North American Printed Circuit Board (PCB) Statistical Program.

PCB Industry Growth Rates and Book-to-Bill Ratios Announced

Rigid PCB shipments were down 10.2 percent and bookings were down 17.0 percent in July 2011 from July 2010. Year to date, rigid PCB shipments increased 2.3 percent and bookings declined 10.0 percent. Compared to the previous month, rigid PCB shipments decreased 24.8 percent and rigid bookings decreased 19.0 percent. The book-to-bill ratio for the North American rigid PCB industry in July 2011 remained near parity at 0.99.

Flexible circuit shipments in July 2011 were down 28.3 percent and bookings declined 4.5 percent compared to July 2010. Year to date, flexible circuit shipments increased 3.2 percent and bookings also increased 8.0 percent. Compared to the previous month, flexible circuit shipments decreased 17.8 percent and flex bookings fell 34.9 percent. The North American flexible circuit book-to-bill ratio in July 2011 jumped to 1.20.

For rigid PCBs and flexible circuits combined, industry shipments in July 2011 decreased 12.1 percent from July 2010, as orders booked decreased 16.0 percent from July 2010. Year to date, combined industry shipments were up 2.4 percent and bookings were down 8.5 percent. Compared to the previous month, combined industry shipments for July 2011 decreased 24.2 percent and bookings decreased 20.8 percent. The combined (rigid and flex) industry book-to-bill ratio in July 2011 climbed to just above parity at 1.01.

“July is typically a slower month than June for the PCB industry,” said IPC President & CEO Denny McGuirk. “Negative year-on-year growth rates in North American PCB sales and orders for July reflect slowing growth compared to the height of the recovery one year ago,” he added. “The good news is the book-to-bill ratio remains just above parity, largely due to the continued strength of flexible circuit orders.”

The book-to-bill ratios are calculated by dividing the value of orders booked over the past three months by the value of sales billed during the same period from companies in IPC’s survey sample. A ratio of more than 1.00 suggests that current demand is ahead of supply, which is a positive indicator for sales growth over the next two to three months.

Book-to-bill ratios and growth rates for rigid PCBs and flexible circuits combined are heavily affected by the rigid PCB segment. Rigid PCBs represent an estimated 89 percent of the current PCB industry in North America, according to IPC’s World PCB Production Report.

The Role of Domestic Production

IPC’s monthly survey of the North American PCB industry tracks bookings and shipments from U.S. and Canadian facilities, which provide indicators of regional demand. These numbers do not measure U.S. and Canadian PCB production. To track regional production trends, IPC asks survey participants for the percent of their reported shipments that were produced domestically (i.e., in the USA or Canada). In July 2011, 82 percent of total PCB shipments reported were domestically produced. Domestic production accounted for 82 percent of rigid PCB and 82 percent of flexible circuit shipments in July by IPC’s survey participants. These numbers are significantly affected by the mix of companies in IPC’s survey sample, which change slightly in January, but are kept constant through the remainder of the year.

Bare Circuits versus Assembly

Flexible circuit sales typically include value-added services such as assembly, in addition to the bare flex circuits. In July, the flexible circuit manufacturers in IPC’s survey sample indicated that bare circuits accounted for about 48 percent of their shipment value reported for the month. Assembly and other services make up a large and growing segment of flexible circuit producers’ businesses. This figure is also sensitive to changes in the survey sample, which may occur at the beginning of each calendar year.

Interpreting the Data

Year-on-year and year-to-date growth rates provide the most meaningful view of industry growth. Month-to-month comparisons should be made with caution as they may reflect cyclical effects and short-term volatility. Because bookings tend to be more volatile than shipments, changes in the book-to-bill ratios from month to month may not be significant unless a trend of more than three consecutive months is apparent. It is also important to consider changes in bookings and shipments to understand what is driving changes in the book-to-bill ratio.

The information in IPC’s monthly PCB industry statistics is based on data provided by a representative sample of both rigid and flexible PCB manufacturers in the USA and Canada. IPC publishes the PCB Book-to-Bill Ratio and the PCB Statistical Program Report each month. Statistics for the previous month are not available until the last week of the following month.


IPC (www.IPC.org) is a global trade association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 3.000 member companies which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly and test. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $1.85 trillion global electronics industry. IPC maintains additional offices in Taos, N.M.; Arlington, Va.; Stockholm, Sweden; Moscow, Russia; Bangalore, India; and Shanghai, Shenzhen and Beijing, China.

Jun 20, 2017 -

Zentech Manufacturing, Inc. First to Recertify for IPC Qualified Manufacturers Listing

Jun 14, 2017 -

IPC Submits Comments to Trump Administration Regarding Modernization of NAFTA

Jun 07, 2017 -

IPC Hand Soldering Competition Winner Crowned at SMT Hybrid Packaging 2017

Jun 01, 2017 -

North American PCB Order Growth Pushes Book-to-Bill Ratio Higher

May 16, 2017 -

IPC Report Details How PCB Manufacturers Meet Current and Future Technology Demands

May 15, 2017 -

Taiwan Union Technology Corporation Receives the First IPC-4101 Qualified Products Listing Certification

May 15, 2017 -

IPC to Host Fourth Annual Reliability Forum in Germany

May 04, 2017 -

Electronics Industry Leaders Meet with Members of Congress and Leaders of Trump Administration Executives urge policymakers to support pro-manufacturing policies

May 04, 2017 -

IPC Welcomes New Senior Director of Learning and Professional Development

May 03, 2017 -

North American PCB Order Growth Boosts Book-to-Bill Ratio

832 more news from Association Connecting Electronics Industries (IPC) »

Jun 25, 2017 -

Libra Industries’ Christopher R. Howell Memorial Foundation Awards $20,000 in Scholarships during Annual Golf Outing

Jun 25, 2017 -

SHENMAO Exhibits at IMAPS System in Package June 27-28, 2017 Introducing 3 New Semiconductor Packaging Fluxes

Jun 25, 2017 -

Ersa Brings the ‘Little Big One’ to SMTA Ohio – Award-Winning Selective Solder

Jun 25, 2017 -

Optimal Electronics Releases Process Control and Traceability Solution for Nordson ASYMTEK Applications in Clean Rooms for Sensor Assembly

Jun 25, 2017 -

Inovaxe Partners with Repstronics in Mexico

Jun 22, 2017 -

PNC Inc. Invests in LED Laser Direct Imaging system from Miva Technologies

Jun 22, 2017 -

Addressing The Modulation of Light Output -- High Quality LED Manufacturing

Jun 22, 2017 -

Schleuniger, Inc. Receives 2017 Best of Manchester Award

Jun 21, 2017 -

Inovar Inc. Breaks Ground for New Facility on USU Innovation Campus

Jun 21, 2017 -

PNC Inc. Launches Design Webinar Series

See electronics manufacturing industry news »

IPC RELEASES PCB INDUSTRY RESULTS FOR JULY 2011 news release has been viewed 725 times

pcb components vacuum pick up

TWEEZER-VAC ELITE Vacuum SMD Tweezer Kit