SMT, PCB Electronics Industry News

IPC Releases PCB Industry Results for April 2011

Jun 01, 2011

Trends in the Book-to-Bill Ratio for Rigid PCBs

Trends in the Book-to-Bill Ratio for Rigid PCBs

Trends in the Book-to-Bill Ratio for Flexible Circuits

Trends in the Book-to-Bill Ratio for Flexible Circuits

Trends in the Book-to-Bill Ratio for Rigid PCBs and Flexible Circuits Combined

Trends in the Book-to-Bill Ratio for Rigid PCBs and Flexible Circuits Combined

Rigid and Flexible PCB Shipments Year-on-Year Growth Rates

Rigid and Flexible PCB Shipments Year-on-Year Growth Rates

IPC — Association Connecting Electronics Industries® announced the April findings from its monthly North American Printed Circuit Board (PCB) Statistical Program.

PCB Industry Growth Rates and Book-to-Bill Ratios Announced

Rigid PCB shipments were up 0.8 percent and bookings decreased 6.6 percent in April 2011 from April 2010. Year to date, rigid PCB shipments were up 5.2 percent and bookings declined 8.1 percent. Compared to the previous month, rigid PCB shipments decreased 15.0 percent and rigid bookings decreased 12.3 percent. The book-to-bill ratio for the North American rigid PCB industry in April 2011 improved slightly to 0.96.

Flexible circuit shipments in April 2011 were up 30.3 percent and bookings increased 7.2 percent compared to April 2010. Year to date, flexible circuit shipments increased 14.3 percent and bookings were up 9.0 percent. Compared to the previous month, flexible circuit shipments decreased 2.4 percent and flex bookings declined 0.8 percent. The North American flexible circuit book-to-bill ratio in April 2011 fell to 0.96.

For rigid PCBs and flexible circuits combined, industry shipments in April 2011 increased 3.0 percent from April 2010, as orders booked decreased 5.6 percent from April 2010. Year to date, combined industry shipments were up 5.9 percent and bookings were down 6.7 percent. Compared to the previous month, combined industry shipments for April 2011 decreased 13.9 percent and bookings decreased 11.5 percent. The combined (rigid and flex) industry book-to-bill ratio in April 2011 inched up to 0.96.

“Growth in North American PCB sales continues to follow normal seasonal patterns and seems to have returned to normal, and the book-to-bill ratio is holding steady at just under parity,” said IPC President & CEO Denny McGuirk. “This suggests the slowdown in sales growth is likely to continue into the third quarter of this year.”

The book-to-bill ratios are calculated by dividing the value of orders booked over the past three months by the value of sales billed during the same period from companies in IPC’s survey sample. A ratio of more than 1.00 suggests that current demand is ahead of supply, which is a positive indicator for sales growth over the next two to three months.

Book-to-bill ratios and growth rates for rigid PCBs and flexible circuits combined are heavily affected by the rigid PCB segment. Rigid PCBs represent an estimated 89 percent of the current PCB industry in North America, according to IPC’s World PCB Production Report.

The Role of Domestic Production

IPC’s monthly survey of the North American PCB industry tracks bookings and shipments from U.S. and Canadian facilities, which provide indicators of regional demand. These numbers do not measure U.S. and Canadian PCB production. To track regional production trends, IPC asks survey participants for the percent of their reported shipments that were produced domestically (i.e., in the USA or Canada). In April 2011, 81 percent of total PCB shipments reported were domestically produced. Domestic production accounted for 79 percent of rigid PCB and 87 percent of flexible circuit shipments in April by IPC’s survey participants. These numbers are significantly affected by the mix of companies in IPC’s survey sample, which change slightly in January, but are kept constant through the remainder of the year.

Bare Circuits versus Assembly

Flexible circuit sales typically include value-added services such as assembly, in addition to the bare flex circuits. In April, the flexible circuit manufacturers in IPC’s survey sample indicated that bare circuits accounted for about 52 percent of their shipment value reported for the month. Assembly and other services make up a large and growing segment of flexible circuit producers’ businesses. This figure is also sensitive to changes in the survey sample, which may occur at the beginning of each calendar year.

Interpreting the Data

Year-on-year and year-to-date growth rates provide the most meaningful view of industry growth. Month-to-month comparisons should be made with caution as they may reflect cyclical effects. Because bookings tend to be more volatile than shipments, changes in the book-to-bill ratios from month to month may not be significant unless a trend of more than three consecutive months is apparent. It is also important to consider changes in bookings and shipments to understand what is driving changes in the book-to-bill ratio.

The information in IPC’s monthly PCB industry statistics is based on data provided by a representative sample of both rigid and flexible PCB manufacturers in the USA and Canada. IPC publishes the PCB Book-to-Bill Ratio and the PCB Statistical Program Report each month. Statistics for the previous month are not available until the last week of the following month.


IPC (www.IPC.org) is a global trade association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 2,900 member companies which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly and test. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $1.85 trillion global electronics industry. IPC maintains additional offices in Taos, N.M.; Arlington, Va.; Stockholm, Sweden; Moscow, Russia; Bangalore, India; and Shanghai, Shenzhen and Beijing, China.

Oct 18, 2017 -

IPC Hand Soldering Competition Winner Crowned at IFTEC in Paris

Oct 17, 2017 -

PCB Prototype Sales Trends Often Diverge from PCB Market Trends According to New IPC Report

Oct 17, 2017 -

IPC APEX EXPO 2018 Educational Programs Highlight Technology’s Accelerating Speed of Change Registration Now Open, Show Floor More than 95% Sold

Oct 11, 2017 -

Nate Carson Joins IPC as New Director of Business Development

Oct 05, 2017 -

IPC Releases 2017 Quality Benchmark Study for Electronics Assembly

Sep 30, 2017 -

North American PCB Order Growth Boosts Book-to-Bill Ratio

Sep 28, 2017 -

IPC Hand Soldering Competition to “Heat Up” productronica 2017

Sep 27, 2017 -

IPC Welcomes Trump Administration’s Framework on U.S. Tax Code

Sep 20, 2017 -

New IPC Studies Show World PCB Market Up in 2016 as North American Market Shrinkage Slows World PCB Production and Annual North American PCB Industry Reports Released

Sep 19, 2017 -

IPC Invites Industry Leaders to Submit Poster Abstracts for IPC APEX EXPO 2018 in San Diego

858 more news from Association Connecting Electronics Industries (IPC) »

Oct 19, 2017 -

Juki Automation Systems Awards Quantum Systems ‘Representative of the Year –Best Performance’

Oct 19, 2017 -

Logic PD to Exhibit Medical Market Successes at MD&M Minneapolis 2017

Oct 18, 2017 -

Horizon Sales Earns Juki Sales Awards

Oct 18, 2017 -

MarTec Receives Outstanding Achievement Award from Juki Automation Systems

Oct 18, 2017 -

Engineered Material Systems Introduces New UV-Cured Adhesive for Bonding Lens Holders in Camera Modules

Oct 18, 2017 -

Keith Bryant to Present on Behalf of YXLON International at productronica

Oct 18, 2017 -

Metcal makes strategic move in industrial ingenuity – Learn more at productronica

Oct 18, 2017 -

Sono-Tek to Introduce New SelectaFlux-A System at productronica 2017

Oct 18, 2017 -

Aegis Software Brings “The Smarter Perspective” on Industry 4.0 MES Technology to Productronica

Oct 18, 2017 -

Data I/O to Showcase SentriX™Security Provisioning Technology and ConneXTM Smart Programming Software for Automotive Applications and Smart Factory Initiatives at productronica

See electronics manufacturing industry news »

IPC Releases PCB Industry Results for April 2011 news release has been viewed 829 times

Smart Factory Starter Kit - KIC

Precision Auger Dispense Pump