SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • Kurtz Ersa to Show New Innovations in the U.S. for the First Time at APEX

Kurtz Ersa to Show New Innovations in the U.S. for the First Time at APEX

Feb 15, 2016

The Ersa Hybrid Rework System HR 600/2 forms the base for the VOIDLESS Rework System.

The Ersa Hybrid Rework System HR 600/2 forms the base for the VOIDLESS Rework System.

Ersa to Introduce a Range of New Selective Solder, Reflow and Rework Equipment

Kurtz Ersa North America, a leading supplier of electronics production equipment, will exhibit in Booth #1326 at the 2016 IPC APEX EXPO, scheduled to take place March 15-17, 2016 at the Las Vegas Convention Center. Ersa will introduce its new line of selective solder, reflow and rework equipment and more.

With the VERSAFLOW 4/55, Ersa presents the next generation of the worldwide leading VERSAFLOW inline selective soldering system, offering a full range of new features: the new, intuitively operable, award- winning user interface ERSASOFT 5.0, motorized adjustable Y-axis for fluxer- and solder module, Y- and Z-variability, full convection preheater and a 508 x 508 mm usable process area for inline production. Through the perfect interaction of all system components, the process flexibility is once more increased and the productivity is further optimized.

The Ersa stencil printer VERSAPRINT S1-3D combines precise stencil printing and 100 percent 3D-SPI in one system – featuring the smallest footprint. The VERSAPRINT stencil printers with integrated 100 percent post-print inspection have successfully established themselves in today’s market for electronic manufacturing equipment. Extending 2D inspection, Ersa now presents the VERSAPRINT 3D-SPI – with even more process control and still minimal floor space requirements.

ERSA’s ROBOPLACE rings in a new era in man - machine collaboration during the soldering process. With its flexible dual-arms technology it frees up the operator to turn to more demanding tasks. While it does not replace the operators, it rather permits their transfer to perform higher-valued tasks. The lean-concept in combination with the SMART-factory is implemented, and a link to Factory 4.0 (Industry 4.0) is prepared. 

The Ersa Hybrid Rework System HR 600/2 forms the base for the VOIDLESS Rework System. In modern electronic manufacturing, components with solder pads located on the underside of the component body are often used. During the reflow process gas inclusions in the joints have occurred, the so-called voids, which can, especially in power electronic applications, cause premature field failures. Reworking the assembly is therefore inevitable, and just for this type of rework, the Ersa Hybrid Rework System HR 600/2 VOIDLESS has been developed.

With the Ersa Hotflow 3/20 VOIDLESS, Ersa presents a process efficient solution to minimize the occurrence of voids, which is characterized by its high throughput in inline operation, short process times and low operating costs. The VOIDLESS module, for which no additional maintenance is required, can be activated /deactivated at any time and reduces the occurrence of voids when compared to other soldering processes by up to 98 percent.For more information about Kurtz Ersa North America, visit www.ersa.com.

Mar 26, 2024 -

ZESTRON's Olaf Schoenfeld, Ph.D. to Participate in EV Special Session at IPC APEX Expo

Mar 18, 2024 -

ZESTRON and Indium Corporation to Present Advancements in Solder Paste Printing at IPC APEX EXPO 2024

Mar 18, 2024 -

XDry to Exhibit Advanced Humidity-Controlled Cabinets at 2024 IPC APEX EXPO

Mar 18, 2024 -

SMTXTRA to Showcase Leading SMT Equipment Services at APEX

Mar 18, 2024 -

The APEX of electronics tooling – speed, cost, and performance.

Mar 11, 2024 -

MIRTEC to Showcase State-of-the-Art 3D AOI Solutions at APEX 2024

Mar 11, 2024 -

ZESTRON to Showcase Cutting-Edge Cleaning Solutions at IPC APEX EXPO 2024

Mar 04, 2024 -

ZESTRON to Present at Upcoming iMAPS Device Packaging Conference

Feb 26, 2024 -

STMicroelectronics expands into 3D depth sensing with latest time-of-flight sensors

Feb 19, 2024 -

ZESTRON to Host Equipment Demo Day & Open House at Manassas Technical Center

82 more news from 3M Electrical Solutions Division »

Mar 27, 2024 -

Red Glue SMT Solutions: A Cost-Effective Approach for Double-Sided PCBs

Mar 26, 2024 -

North American PCB Industry Sales Down 11.6 Percent in February

Mar 26, 2024 -

iNEMI/IPC White Paper on Complex Integrated Systems Highlights Future Technology and Manufacturing Ecosystem Needs

Mar 26, 2024 -

Don Dennison Appointed to Roll Out KIC's Latest Thermal Analysis System Software in the Northeast

Mar 26, 2024 -

Altus Group Achieves Record Sales Milestone with Koh Young Europe

Mar 26, 2024 -

STI Welcomes Edrick Young as the Newest Mechanical Assembly Technician

Mar 26, 2024 -

Anda Technologies Receives 2024 NPI Award for Setting a New Standard in Smart Manufacturing

Mar 26, 2024 -

ZESTRON's Olaf Schoenfeld, Ph.D. to Participate in EV Special Session at IPC APEX Expo

Mar 26, 2024 -

North American EMS Industry Up 4.1 Percent in February

Mar 26, 2024 -

SMTA Europe Announces 2024 Spring Conferences

See electronics manufacturing industry news »

Kurtz Ersa to Show New Innovations in the U.S. for the First Time at APEX news release has been viewed 1227 times

  • SMTnet
  • »
  • Industry News
  • »
  • Kurtz Ersa to Show New Innovations in the U.S. for the First Time at APEX
Reflow Oven

IPC Training & Certification - Blackfox