SMT, PCB Electronics Industry News

Saelig Intros Teledyne LeCroy's quantumdata 280 HDTV A/V Test Set

Jan 30, 2018

Quantum 280 from Saelig

Quantum 280 from Saelig

Teledyne LeCroy quantumdata 280 HDMI/HDBaseT Video Generator (Tx) and Analyzer (Rx) - a small compact, battery powered test set ideally suited for professional A/V integrators and home theatre installers. This convenient test set assists with fundamental verification and diagnostic tests on HDMI/HDBaseT cables, video distribution networks, and individual A/V components.  The HDMI input and output ports support testing at data rates of up to 18Gbps and pixel rates of up to 600MHz. The HDBaseT input and output ports support testing at pixel rates up to 300MHz.

The Teledyne LeCroy 280 Test Set can quickly verify hot plug, +5V, EDID, HDCP, and video transmissions through a video distribution network, check interoperability between video sources, displays and distribution equipment, and diagnose video and protocol failures in cables, video distribution devices and components with a simple Pass/Fail indication on its LCD display. 

Video/Audio Tests Supported

280G Video Generator

  • Video Test: select from standard set of CTA and VESA formats and test patterns up to 4K@60Hz
  • Hot plug detect: check hot plug voltage from connected sink (e.g. UHD TV)
  • HDCP active: verify HDCP; select version 1.4 or 2.2
  • EDID Test: view EDID contents of connected sink or entire downstream video distribution network
  • Audio Test: generate LPCM audio test tone to check continuity end-to-end

280A Video Analyzer

  • Video Format Test: verify incoming video timing and essential video parameters from a UHD source or entire upstream video distribution network
  • Video Test: view incoming video on embedded screen
  • +5V: check +5V from a UHD source
  • HDCP Active: verify HDCP operation; version 1.4 or 2.2
  • EDID Test: emulate EDIDs to test response of source or entire upstream network
  • Link/Cable Test: test HDMI or HDBaseT cable runs, cables installed on site and routed through walls.
  • Audio Test: verify LPCM audio end-to-end


Installing video equipment and distribution networks is a complex task. This is especially true for the newest 18Gbps network installations.  The quantumdata 280 Test Set can quickly identify likely causes of problematic and expensive failure conditions such as no video, degraded video, flashing video, unexpected video or audio and other performance issues. Audio/video professionals will appreciate this affordable solution that helps bring quick resolution to these problems. 

Whether verifying an HDMI cable or a re-terminated HDBaseT cable run, checking an HDBaseT extender, testing the EDID handling of an HDMI switch, checking HDCP content protection protocols or just verifying a video distribution network end-to-end, this compact, affordable 280 Test Set will save installation time on site, reduce callbacks, and provide technicians with the assurance that the video distribution network just installed will run problem free.

The compact (7.1” x 7.4” x 1.25”) and lightweight (0.95lbs) quantumdata 280 Test Set is available now from Teledyne LeCroy’s authorized North American distributor Saelig Company, Inc. Fairport, NY. 

Jun 12, 2018 -

Saelig Introduces New Rigol 7000 Series 100/500MHz 10GSa/s oscilloscopes

Jun 08, 2018 -

Saelig Introduces Economical Modulated RF Power Amplifiers For Pre-compliance Testing

Jun 06, 2018 -

Saelig Introduces Economical Programmable 128W Power Supply With 1mV/1mA Precision

May 25, 2018 -

Saelig Introduces LoRa/FSK Smart Modem Transceiver For Long Range Control

Apr 26, 2018 -

Saelig Introduces Berkeley Nucleonics 765 Ultra-Fast Rise Time Pulse Generator

Apr 11, 2018 -

Saelig Introduces Teledyne LeCroy HVD3000A Series 1-6kV High-Voltage Differential Probes

Apr 03, 2018 -

Saelig Introduces Teledyne LeCroy WaveSurfer 3000z 4-channel 1GHz Oscilloscope Range

Mar 01, 2018 -

Saelig Launches New Crystal Oscillators With Four Switchable Frequencies and Low Jitter

Jan 18, 2018 -

Saelig Introduces RSA5000 3.2/6.5GHz Real-Time Spectrum Analyzers

Nov 13, 2017 -

Saelig Intros New Economical 500MHz Dual-Channel AWGs From Siglent

29 more news from Saelig Co. Inc. »

Jul 16, 2018 -

Industry Veteran Joins Creative Electron

Jul 16, 2018 -

Connect Group Selects Aegis Software’s FactoryLogix MES Platform

Jul 16, 2018 -

Libra Industries partners with CoPro Technologies for Mechanical Design / PCB Layout

Jul 16, 2018 -

Precision PCB Services, Inc. adds Side View Camera to their BGA Rework Stations

Jul 15, 2018 -

Great Results from Europe’s First atom Platform Installation at Syselec France.

Jul 12, 2018 -

Epec Partners with Wounded Warrior Project

Jul 12, 2018 -

Lacon Electronic GmbH acquires TRI's AOI Solution for Zero Tolerance

Jul 11, 2018 -

Kurtz Ersa Inc. Expands Its North American High-Tech Demo Center

Jul 11, 2018 -

ADLINK Joins Open Networking Foundation (ONF) as Collaborating Innovator to Boost Transformation of Network Infrastructure

Jul 11, 2018 -

IPC Releases 2018 Quality Benchmark Study for Electronics Assembly

See electronics manufacturing industry news »

Saelig Intros Teledyne LeCroy's quantumdata 280 HDTV A/V Test Set news release has been viewed 44 times

Jetting Pump for Integration

SMT machines spare parts