SMT, PCB Electronics Industry News

CableEye® Generic Surface Mount & TH Board, CB51

Oct 11, 2016

The CB51, sold without connectors, contains four sets of 60 solder pads accommodating numerous configurations of surface mount and TH connectors – aligned or staggered pins at 1.25mmm and 1.5mm pitch.

The CB51, sold without connectors, contains four sets of 60 solder pads accommodating numerous configurations of surface mount and TH connectors – aligned or staggered pins at 1.25mmm and 1.5mm pitch.

CAMI Research Inc. (Acton, MA) announces another new board for its CableEye cable and harness testing systems. Populated with solder pads to accept both aligned and staggered, 1.25mm and 1.5mm pitch, surface mount and through hole (TH) connectors, the board addresses any market with a demand for board-to-board connections. Rated to 700Vdc/500Vac, the CB51 may be used on all CableEye models.

Configuration

A leader in development of PC-based Cable & Wire Harness Test Systems for over 20 years, CAMI offers the CableEye suite of Low and High Voltage products complete with accessories including connector boards. The selection of boards is constantly growing and is currently numbering over 60 – most of which are populated with ‘families’ of connectors. These connectors are shown graphically correct with CableEye’s standard dynamic user interface.

The CB51, sold without connectors, contains four sets of 60 solder pads accommodating numerous configurations of surface mount and TH connectors – aligned or staggered pins at 1.25mmm and 1.5mm pitch. There are four preset locations for automatic detection & display of any-pin-count connector up to 60-pins. Yet, any single set may be fitted with any combination of lower pin count connectors that total to 60 or less (e.g. a 40-pin with a 10-pin). Connectors soldered in non-preset positions will also appear graphically correct once they are mapped with PinMap™ (optional software).

Sold as a set of two boards, each test board may be paired with other CableEye adapter boards to accommodate any combination of connectors.

Application

Customers requiring this board typically have products that may need HiPot testing and that have board-to-board connections such as box builds or other contained devices e.g. AV Equipment & Telecom products.

Warranty

Connector boards are included in CableEye’s standard, renewable one-year warranty of the tester for which it was purchased.

Availability & Domestic US Pricing

Available immediately, a CB51 set is $195 (Item 781).

Contact sales@camiresearch.com or +1 (978) 266-2655 for a quote.

Note: Prices are USA only and subject to exchange rates, freight and import costs. Contact your local authorised distributor for local pricing.


CAMI Research produces expandable and upgradable diagnostic Cable & Harness Test Systems for assembly, prototyping, production, and QC of standard or custom cables. CableEye® Testers display, and document basic electrical properties such as continuity, resistance, dielectric breakdown, insulation resistance, miswires, and intermittent defects.

Oct 23, 2023 -

CableEye Wiring Analyzers Measure 10 GΩ Isolation at 100 V

Dec 07, 2022 -

Automatically Measure and Report Environmental Test Conditions with Cable/Harness Electrical Function Data

Apr 28, 2022 -

CAMI Research Releases M2Z Low Voltage Multi-Conductor Cable Tester at EWPTE, Milwaukee

Dec 17, 2021 -

Generic Custom Test Interface Fixture Rated to 2100 Vdc, CB8H For Panel- and Cable-Mounted Connectors, and LIF Test Blocks

Sep 13, 2018 -

CAMI Celebrates 25 Years Developing Automation-Ready Cable and Harness Testers

Aug 21, 2018 -

CAMI Develops Capability of Checking Twist Pair Relationships in Cables as Short as Six Feet

Mar 21, 2018 -

CAMI Research to Host Professional Development Workshops at EWPT Expo, Milwaukee

Jan 11, 2018 -

CableEye® HV-Rated QuickMount™ Housing for CAMI Connector Boards, CBH2

Aug 01, 2017 -

CableEye® USB Type-C Test Fixture, CB26U

Jul 27, 2017 -

CAMI Research Releases CableEye® USB Type-C Test Fixture, CB26U

16 more news from CAMI Research Inc. »

Mar 27, 2024 -

Red Glue SMT Solutions: A Cost-Effective Approach for Double-Sided PCBs

Mar 26, 2024 -

North American PCB Industry Sales Down 11.6 Percent in February

Mar 26, 2024 -

iNEMI/IPC White Paper on Complex Integrated Systems Highlights Future Technology and Manufacturing Ecosystem Needs

Mar 26, 2024 -

Don Dennison Appointed to Roll Out KIC's Latest Thermal Analysis System Software in the Northeast

Mar 26, 2024 -

Altus Group Achieves Record Sales Milestone with Koh Young Europe

Mar 26, 2024 -

STI Welcomes Edrick Young as the Newest Mechanical Assembly Technician

Mar 26, 2024 -

Anda Technologies Receives 2024 NPI Award for Setting a New Standard in Smart Manufacturing

Mar 26, 2024 -

ZESTRON's Olaf Schoenfeld, Ph.D. to Participate in EV Special Session at IPC APEX Expo

Mar 26, 2024 -

North American EMS Industry Up 4.1 Percent in February

Mar 26, 2024 -

SMTA Europe Announces 2024 Spring Conferences

See electronics manufacturing industry news »

CableEye® Generic Surface Mount & TH Board, CB51 news release has been viewed 1369 times

Software for SMT

Sell Your Used SMT & Test Equipment