SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • Press preview for Seica Inc. participation at Apex 14 – 16 February 2017, San Diego, CA, Booth 1933

Press preview for Seica Inc. participation at Apex 14 – 16 February 2017, San Diego, CA, Booth 1933

Feb 08, 2017

Compact Multi.

Compact Multi.

Automated Pilot4DV8.

Automated Pilot4DV8.

Seica will be exhibiting at the Apex show held in San Diego this year showing our expanding lines of test and assembly equipment.  The automated Pilot4DV8 will be showcased fully automated in a batch line environment.  The automated solution will demonstrate a magazine and conveyance solution that will allow customers to load different board part numbers for automated testing.  Industrial automation software will be discussed with those interested in full production line monitoring with Seica’s new ‘standalone’ software that can be integrated with not only Seica equipment, but SMT line equipment, ovens, pick & place systems, X-ray and vision systems.  Seica equipment and software are all Factory 4.0 ready.  For those interested in RF measurements using a Flying Prober, Seica Inc. was awarded a place in the exhibition hall, specifically for OEMs with newly released innovated solutions showing our high frequency measurement solution.  This has been Seica’s 4th award at Apex for its innovated product advancements.

The Compact line will show several solutions for production line testing, from ICT , to automotive and RF functional testing.  Seica will show 4 products; Compact TK, Compact Multi, and both, the Mini 80 and Mini 200 benchtop ATEs.  From very simple ICT testing with a few 100 channels to our high density solutions that perform combination testing, Seica has a robust, easy to maintain, and easy to use solution for your production lines. 

New for the show this year will be our top and bottom selective laser soldering system, the Firefly.  This unit is ideal for automotive, high production through put and mil/aero applications.  The Firefly is unique in that it requires no nitrogen and can be easily changed from lead to no-lead applications in under 5 minutes. The power consumption of our laser solution is far less than traditional molten solder solutions and easier to maintain and set up.  The Firefly can also be easily integrated into assembly lines and a retrofit kit is available for 3rd party integrators.

In regards to automation there will be a selection of loaders and unloaders shown. Specifically, the Firefly will be set up with an input magazine and unloader.  Under the name of Seica Automation”, our sister division produces board conveyance systems for our own equipment but for full production lines that may not use Seica equipment.  Seica Automation equipment includes, handlers, buffers, loaders, magazines, label applicators, vision inspection cells and rework cells, and all types of board handling solutions under the model names of FLO (standard) and FLEX (custom) Seica is also able to customize a solution for your challenging board handling requirements.

We will also have a counter to discuss your test services or data regeneration needs.  Seica is staffed with a talented crew of test service providers and professionals who can assist with your prototype testing or production needs.  We will gladly provide a quotation for your staff to review. 

 New for 2017 is Seica’s line of distributor products, such as the Modus GmbH, AOI conformal coat and THT inspection system, and SMH flash programming solutions.  The Modus system is unique in the market due to its LED scanning system and high resolution capability.  Its ability to detect contamination is unprecedented on the market.  The need in both the automotive and mil/aero markets are increasing due to the number of product recalls ongoing in 2016. 

Please stop by our booth # 1933 and visit with any number of our sales managers or application team for a demo.


Founded in 1986, Seica S.p.A. is a global supplier of automatic test equipment and selective soldering systems, with an installed base of more than 1700 systems on 4 different continents. Seica offers a complete line of test solutions, including bed of nails and flying probe testers able to perform MDA, in-circuit and full functional tests of assembled electronic boards and modules and printed circuit boards, as well as LASER-based selective soldering systems for electronic board manufacturing and a full range of test application services. Company headquarters are located in Strambino, Italy, with direct offices in USA, Germany, China, Mexico and France, supported by a vast distribution network covering the rest of the world. Since 2014, Seica S.p.A. is supported by a sister company, Seica Automation located in Milan, which designs and manufactures board handling systems and other automation equipment for the electronic manufacturing industry Please see www.seica.com

May 05, 2017 -

Preview for Seica SMT Nuremberg May 16-18, 2017 Booth # 4A-300. In the limelight: Industrial Monitoring and Automation

Apr 19, 2017 -

Seica SpA to participate at Electron TechExpo, Moscow, Russia, April 25 – 27 2017, Booth B-511

Feb 20, 2017 -

Gala dinner event in Castello of Pavone, Turin, Italy marks 30 years in business for the ATE manufacturer

Feb 14, 2017 -

Preview for Seica for IPC Apex 2017, San Diego -- Booth 1933 - Expanded Lines of Test and Assembly Equipment

Jan 04, 2017 -

Seica To Set Up a New Competence Center in Karlsruhe, Germany

Oct 02, 2016 -

Press preview for Seica SpA participation at Electronica, Munich, November 8 – 11, 2016, Hall A1, Booth A1-459, New Munich Trade fair.

Sep 27, 2016 -

Preview for Seica SpA participation at Electronica, Munich.

Aug 11, 2016 -

Seica Will Present Its New Fully-Automated Pilot4D V8 Flying Prober At The E-16 Electronic Fair in Denmark

Aug 02, 2016 -

At the NI Week Conference in Austin Seica Will Debut the Pilot4D V8 HF, a Unique Solution Combining Flying Probe Technology and High Frequency Testing.

Aug 01, 2016 -

Seica SpA participation at National Instruments Week 2016, 1-4 August in Austin, booth 833, Texas, USA

39 more news from SEICA SpA »

Jun 25, 2017 -

Libra Industries’ Christopher R. Howell Memorial Foundation Awards $20,000 in Scholarships during Annual Golf Outing

Jun 25, 2017 -

SHENMAO Exhibits at IMAPS System in Package June 27-28, 2017 Introducing 3 New Semiconductor Packaging Fluxes

Jun 25, 2017 -

Ersa Brings the ‘Little Big One’ to SMTA Ohio – Award-Winning Selective Solder

Jun 25, 2017 -

Optimal Electronics Releases Process Control and Traceability Solution for Nordson ASYMTEK Applications in Clean Rooms for Sensor Assembly

Jun 25, 2017 -

Inovaxe Partners with Repstronics in Mexico

Jun 22, 2017 -

PNC Inc. Invests in LED Laser Direct Imaging system from Miva Technologies

Jun 22, 2017 -

Addressing The Modulation of Light Output -- High Quality LED Manufacturing

Jun 22, 2017 -

Schleuniger, Inc. Receives 2017 Best of Manchester Award

Jun 21, 2017 -

Inovar Inc. Breaks Ground for New Facility on USU Innovation Campus

Jun 21, 2017 -

PNC Inc. Launches Design Webinar Series

See electronics manufacturing industry news »

Press preview for Seica Inc. participation at Apex 14 – 16 February 2017, San Diego, CA, Booth 1933 news release has been viewed 250 times

  • SMTnet
  • »
  • Industry News
  • »
  • Press preview for Seica Inc. participation at Apex 14 – 16 February 2017, San Diego, CA, Booth 1933
Reflow Ovens thermal process improvement

SMT equipment