SMT, PCB Electronics Industry News

Revive Your Dispenser with Advanced Dispense Technologies

Dec 09, 2016

PCD dispense technology enhances dispense processes that require fluids ranging from very low viscosity, such as water, to thick pastes up to 80,000 cps. Semi-abrasive fluids can be handled by the PCD Volumetric Pump because it pushes fillers through the pump rather than grinding them.

PCD dispense technology enhances dispense processes that require fluids ranging from very low viscosity, such as water, to thick pastes up to 80,000 cps. Semi-abrasive fluids can be handled by the PCD Volumetric Pump because it pushes fillers through the pump rather than grinding them.

This div will be replaced by the JW Player.

No drip or drool across a wide range of fluid viscosities (low-to-mid and low-to-high) with GPD Global PCD Pumps for total control of your dispensing fluids.

GPD Global, a manufacturer of precision fluid dispensing systems for high-volume 24/7, low-volume/high-mix, and R&D production, offers advanced dispense pump technologies to upgrade your existing platform and take advantage of existing capital equipment. Retrofit your system with innovative dispensing technology for excellent dispense control and repeatability.

Advanced pump technologies available for retrofitting include: True Volumetric Pump, Precision Auger Pump, and Simplified Jetting Pump.

GPD Global's True Volumetric Pump is based on Progressive Cavity Dispense Technology. It accommodates a wide range of fluid viscosities - from water to mid-viscosity (65,000 cps) pastes. With a completely sealed system, these pumps do not drip nor drool. Volumetric pumps ensure the success of applications like underfill, LED encapsulation, solder mask, silicones, conductive ink, conformal coatings, and more. Three PCD pump models are available for integration into your system with small or large volume requirements. The smallest model dispenses volumes down to 0.5 μl, while the largest model dispenses at rates up to 16 ml/min. With the ability to program the controller in terms of volume or on/off mode, process set up and integration are a snap. Retrofit a Volumetric PCD Pump into your system to simplify the dispense process as well as improve throughput and yield.

Precision Auger Pump Integration provides your process development with a wide range of functionality. The advanced Precision Auger Pump expands solder paste dispensing to include 01005 with our newest auger design. With wetted parts machined from carbide, the auger/cartridge assemblies can withstand abrasive thermal pastes and damming fluids. With an intuitive touch screen controller that incorporates closed loop motion control, programming the pump and obtaining reliable dispensing has never been easier. This auger pump guarantees success when dispensing these fluids: abrasive thermal gel, conductive adhesive, dam and fill, gasketing, and more. Retrofit this outstanding auger technology into your platform to increase productivity.

The NCM5000 Jetting Pump simplifies jetting to its basic elements: hammer, pin, and nozzle. Only the pin and nozzle are wetted. This translates into easy set up, cleaning, and operation. The pump can be disassembled for cleaning in a matter of seconds. The drive system, being pneumatic, is designed for reliable, high speed operation, and can be serviced in the field when required. Wavy or uneven product surfaces do not affect the jetting pump because dispensing is typically performed 2 to 3 mm above the surface. By eliminating z axis motion and incorporating high speed pump operation, throughput is greatly increased. The NCM5000 is compatible with a wide range of fluids: UV curables, SMT glue, Underfills, LED encapsulants, and more. The NCM5000 Jetting Pump is now available for integration into your system for more effective dispensing.

Revive your existing dispense platform by retrofitting a cutting edge dispense pump. This is an easy process; all you need is the Integration Kit. Call +1 (970) 245 0408 today for a free consultation to improve the repeatability, accuracy, and productivity of your dispense process.


GPD Global is an equipment manufacturer of high-quality, precision, automated fluid dispensing and component-prep systems. The company is an international, state-of-the-art equipment supplier for the PCB assembly and semiconductor industries. It designs and manufactures a variety of automatic fluid dispense systems, as well as manufactures an SMT Cover Tape Peel Tester and Component Prep equipment for Thru-Hole applications. GPD Global is committed to offering premium service to its customers and has sales and customer support affiliates located throughout the world, including North America, South America, Europe, the Middle East and Asia-Pacific.

Jul 10, 2017 -

East Coast Demo Center for Conformal Coating System!

Jun 14, 2017 -

2-Part Mixing is now Volumetric Dispensing!

May 03, 2017 -

Consistent Fluid Supply & Uniform Fluid Dispensing

Apr 11, 2017 -

Largest Dispensing Platform in the Industry

Mar 09, 2017 -

GPD Global Launches NEW Conformal Coating System

Jan 26, 2017 -

New Dispensing & Conformal Coating Products - Live Demo - Booth 2933, APEX San Diego

Nov 21, 2016 -

Altus Updates its Portfolio with GPD Global’s Latest System

Nov 07, 2016 -

Multi-Functional System Dispense with Pick and Place

Sep 29, 2016 -

See Latest Dispense Technology Demonstrated at iMAPS 2016

Sep 14, 2016 -

See Latest Dispense Technology Demonstrated at SMTA International

36 more news from GPD Global »

Aug 17, 2017 -

ZESTRON Americas Announces New Regional Sales Manager

Aug 17, 2017 -

SEHO Soldering Expert to Discuss Resource & Cost Efficient Wave Soldering at SMTAI

Aug 17, 2017 -

Libra Industries Announces Two 20-Year Service Awards in Q2 2017

Aug 17, 2017 -

Cirtronics Installs High-Performance X-ray Inspection Solution

Aug 17, 2017 -

Essemtec to Show New All-in-One Jetting / Placement System at SMTAI

Aug 17, 2017 -

Engineered Material Systems to Introduce New Conductive Adhesives for Stringing and Shingling Next-Generation Solar Modules at EU PVSEC

Aug 17, 2017 -

What is SMT and where to by SMT spare parts

Aug 16, 2017 -

ViTrox and KIC Establish Cooperation and Connectivity

Aug 16, 2017 -

Inovaxe Is Making Storage SMARTER – Visit Booth #915 at SMTAI

Aug 16, 2017 -

COT Increases Manufacturing Capability with New DMG Horizontal Milling Centers

See electronics manufacturing industry news »

Revive Your Dispenser with Advanced Dispense Technologies news release has been viewed 613 times

Nitrogen Capable SMD & BGA Rework Station