News added by Reed Exhibitions
Apr 13, 2015 | Warm congratulations on the 25th anniversary of NEPCON China, an event organized by Reed Exhibitions! The Tianjin SMT Committee also extends its heartfelt commendations on the 30th anniversary of the introduction of SMT to China!
Apr 13, 2015 | NEPCON China 2015, set for Shanghai World Expo Exhibition & Convention Center from 21-23 April, will showcase the latest technologies and products in the fields of SMT, surface welding, electronic test and measurement, electronics manufacturing automation, ESD, and new materials. The event will provide comprehensive solutions for electronics makers. As Asia’s biggest SMT event, NEPCON China 2015 will advance national economic development strategies locally and internationally. New product launches will illustrate hot trends and lead the next wave of industry development in China.
Apr 09, 2015 | NEPCON China 2015 will take place in Hall 1 of Shanghai World Expo Exhibition & Convention Center from 21-23 April. The show will cover the latest products and technologies in the fields of SMT, surface welding, electronic test and measurement, electronics manufacturing automation, ESD, and new materials.
Apr 02, 2015 | Wearable devices come in a wide range of forms, including devices for the medical and gaming fields, as well as those for everyday use. The development of wearable tech is transforming daily living. Some wearable devices have roughly the same capability as a typical desktop computer. Sophisticated wearable devices can be used for surveillance, monitoring and analysis of data captured by sensors.
Apr 01, 2015 | The global telecommunication industry is exploring a number of 5G possibilities, including infrastructure and architecture buildup. As part of this process, multiple stakeholders are cooperating to promote standardization and industrialization. Ericsson and CAICT signed an MoU in early 2015 to launch a joint 5G R&D projec
Mar 31, 2015 | The electronics manufacturing automation trend, as seen in robotics, motion control, automation equipment/accessories, transmission, tools, assembly and materials, is a key industry highlight, transforming electronics manufacturing by encouraging ongoing restructuring. NEPCON China 2014 introduced new equipment and technologies in its EMA zone, demonstrating how, robotics are replacing manual labor. This year, at the Shanghai Expo Center, NEPCON China 2015 will again focus on electronics manufacturing automation, while highlighting automation system integration, a step beyond mere hardware equipment.
Mar 30, 2015 | Part of a leading series of industry events stretching back over 40 years in Asia, NEPCON China 2015 will be held at the Shanghai Expo Center from 21 to 23 April. It will be a combined showcase of advanced SMT, test and measurement, electronics manufacturing automation, and electronics providers who will put on a captivating showcase of new technologies and solutions.
Mar 18, 2015 | News reports claim that foreign companies are leaving China in numbers. So are major manufacturing operations, as evidenced by cases of Microsoft and Nokia, who both recently shut down their China plants. Uniqlo, Foxconn, Clarion and Samsung are also accelerating the transfer of their manufacturing activities to other countries. The made-in-China label is losing its au
Mar 16, 2015 | NEPCON China is a key event that the entire electronics manufacturing industry pays attention to. This year, the exhibition will take place at Shanghai New International Expo Center (Hall 1) from 21-23 April. NEPCON China 2015 will gather 500 exhibitors from 22 countries and regions. The key industry event will feature cutting-edge SMT technologies, products and solutions.
Feb 19, 2015 | NEPCON China 2015 will take place in Hall 1 of Shanghai Expo Center from 21 to 23 April 2015. The event is set to feature new technologies and products in SMT, surface welding, electronics measurement, automatic electronic production, static electricity prevention and new materials.
Feb 18, 2015 | NEPCON China 2015 will take place in Hall 1 of Shanghai Expo Center from 21 to 23 April 2015. The event will feature the latest technologies and products in SMT, surface welding, electronic measurement, automatic electronic production, static electricity prevention, and new materials.
Feb 11, 2015 | Wearable tech was a major sensation in 2014. The wearable tech industry generated extensive interest among media, investors, start-ups, wearable tech enthusiasts, technology leaders and trade fairs. Many events were held around wearable products and industry last year. The trend for early 2015 has seen the industry fall back into a healthy developmental pace. Investors are keen to see a return on their capital injections and former start-ups are now reaching maturity.
Jan 26, 2015 | According to the Report on the Operation of the Electronic & Information Industry: January to November 2014, written by the Ministry of Industry & Information Technology (MIIT), in the first 11 months of last year, there was steady and continued growth in manufacturing. The added value of large-scale electronics and information manufacturing grew by 12% y-o-y, and in the eastern parts of China sales peaked at RMB 7,260.4 billion, an increase of 6.7%, which accounted for an overall 77.8% of total exports.
Dec 29, 2014 | From 21 to 23 April 2015, the mega event in electronics manufacturing - the 25th edition of NEPCON China will be held at the Shanghai World Expo Exhibition & Convention Center. NEPCON China, one of the largest SMT exhibitions of Electronics Manufacturing Automation (EMA) equipment and techniques in Asia, is co-organized by the world’s largest exhibition organizer, Reed Exhibitions, and the CCPIT Electronics & Information Industry Sub-council. It is one of the most authoritative events in electronics manufacturing across China and Asia-Pacific. As an event organizer deeply trusted by industry professionals.
Oct 22, 2014 | To support poorer communities in Western China as winter approaches, members of the Reed Exhibitions Global family contributed toward the costs of buying new jackets to give to underprivileged children as part of Sending Love to Children – Reed’s primary charity initiative for 2014.
Aug 14, 2014 | NEPCON South China, the Asian electronics manufacturing industry's most essential event, is scheduled to take place August 26-28, 2014 in Shenzhen, China. This year, the show will again be a comprehensive display of the application of state-of-the-art technologies and products in electronics manufacturing - Matching the right trade partners for high efficiency, high value business discussions.
Aug 07, 2014 | Reed Exhibitions supported the 6th annual International Church of Shanghai (ICS) Charity Golf Tournament, held at Silport Golf Club in Kunshan.
May 07, 2014 | Seven Reed Exhibitions (RX) Greater China events were among the recipients of coveted “Goldfinger Awards” at the 12th Annual China Convention & Exhibition Fortune Forum (CCEFF), held in Shanghai during April 2014.
May 05, 2014 | NEPCON China, the Asian electronics manufacturing industry’s most essential event, launched in Shanghai at the World EXPO Exhibition & Convention Center successfully.
Apr 17, 2014 | NEPCON China 2014 will be held at Shanghai World EXPO Exhibition & Convention Center from April 23-25, 2014.
Mar 12, 2014 | MIIT issued 4G licenses to China Mobile, China Telecom, and China Unicom on 4 Dec, marking the beginning of the 4G era in China.
Mar 06, 2014 | The first meeting of the NEPCON 2014 Advisory Panel was recently held at the offices of the exhibition organizers, Reed Exhibitions Shanghai.
Oct 02, 2013 | NEPCON South China, which took place at the Shenzhen Convention and Exhibition Center in August, is the largest, longest running electronics trade fair in South China.
Jul 16, 2013 | NEPCON South China is the most effective business platform for the SMT industry to generate sales leads and enhance brand awareness in South China, the powerhouse of manufacturing in China.
Feb 19, 2013 | NEPCON China 2013 Demonstrates Frontier of Leading Automation Technologies
Nov 16, 2012 | NEPCON Chinawill take place at the Shanghai World Expo Convention & Exhibition Center between April 23 and April 25, 2013.
Nov 02, 2012 | In the wake of successive growth patterns driven by applications of display and backlight, a third growth wave, characterized by lighting applications, is approaching
Oct 23, 2012 | With China’s electronics manufacturing industry developing in leaps and bounds each year, the country has become the world’s unrivaled electronics manufacturing hub.
Sep 27, 2012 | South China's electronics manufacturing equipment prowess attracted a total of 29,480 trade visitors, up 11.8% over last year, including 7,836 buyers/VIPs and 3,407 delegation visitors.
Sep 25, 2012 | As the saying goes, “In the Yangtze River, the waves behind drive on those before with the old waves vanishing on the shore.” This aptly describes the status of the domestic LED industrial investment.
Sep 20, 2012 | Foreword: 2012, thoughts from LED industry Industrial Environment at Home and Abroad: How should policies, capital, technology and industry break through at the backdrop of market uncertainty?
Sep 06, 2012 | CHINASSLhas been successfully held for eight years, becoming the most influential LED industry event with the largest scale around the globe.
Aug 28, 2012 | Today, August 28, 2012, the combined 18th edition of NEPCON South China and ATE China 2012 exhibitions began.
Aug 28, 2012 | NEPCON South China 2012 kicked off today at the Shenzhen Convention & Exhibition Center.
Aug 20, 2012 | NEPCON South China 2012will be present with their new products, providing a comprehensive showing of the latest electronics production equipment products and technologies.
Aug 16, 2012 | NEPCON South China 2012 will take place between August 28 and August 30, 2012 at Shenzhen Convention & Exhibition Center
Aug 15, 2012 | NEPCON South China 2012 will take place between August 28 and August 30, 2012 at the Shenzhen Convention & Exhibition Center
Aug 14, 2012 | LED industry will reach 500 billion Yuan, with 50 pilot model cities of “Achievements Show of Ten Pilot Cities” and 20 distinctive industrialization bases of strong innovation ability established.
Aug 06, 2012 | Despite the grim international economy, China’s electronics manufacturing industry remains on an upward trajectory.
Aug 02, 2012 | NEPCON South China 2012,will take place between August 28 and August 30 at the Shenzhen Convention & Exhibition Center.
Jul 17, 2012 | With China’s electronics manufacturing industry continuing to develop in leaps and bounds, the country has become the largest electronics manufacturing center in the world.
Jul 11, 2012 | CHINASSL2012 Invites You to Discuss the Future of Domestic LEDs
Jun 20, 2012 | NEPCON South China 2012s the largest and longest-running SMT exchange platform in South China, the annual event is a popular industry highlight.
Jun 19, 2012 | “We find it difficult to conduct foreign trade business of LED lights because the customers have greatly beaten down the prices, for example, the price of spotlights (3W) has fallen from $5.80in the first quarter to $3.50.
Jun 12, 2012 | ATE China 2012 will take place between August 28 and August 30, 2012 at the Shenzhen Convention & Exhibition Center.
May 30, 2012 | The high-profile trade event for new manufacturing equipment, technologies and solutions attracted electronics manufacturing and SMT’s most innovative companies.
May 29, 2012 | A showcase for South China's entire electronics manufacturing chain
Apr 26, 2012 | NEPCON China 2012 raised its curtain at the Shanghai World Expo Convention & Exhibition Center on April 25, 2012. Its entry into the new Exhibition Center was welcomed by the enormous enthusiasm of the visitors swarming it on the first day
Apr 22, 2012 | NEPCON China will be held at Shanghai World Expo Convention & Exhibition Center for the first time on April 25, 2012. During this three-day exhibition, NEPCON China 2012 will give a comprehensive look at new technologies, products and solutions in the electronics manufacturing and SMT industry, covering SMT technology and equipment, soldering equipment and materials, test and measurement, ESD and clean room, bar code equipment and materials, electronics manufacturing automation equipment, electronic manufacturing services, and more.
Apr 09, 2012 | With the rapid development of the LED industry, China has become a major production and export hub