Seika Machinery, Inc. News

Company Information:

Seika Machinery, Inc.

Seika Machinery provides electronics manufacturers with advanced machinery, superior materials and engineering services including Automated Test Equipment, SMTA assembly equipment and QA products

Torrance, California, USA

Cleaning, Distributor, Drilling/Routing, Inspection

  • Phone 310-540-7310
  • Fax 310-540-7930

Seika Machinery, Inc. website

Company Postings:

(4) products in the catalog

(194) news releases

(1) job posting

194 news from Seika Machinery, Inc.

Seika Recognizes Top Performing McDry Reps during APEX

Feb 23, 2017 | Seika Machinery is pleased to announce its top McDry representatives for 2016. The top three reps were recognized during the recent IPC APEX EXPO in San Diego.

From left to right: Ban Saito, Michelle Ogihara and Mark Edward.

New Bubble Washer System for Stubborn Flux Cleans Five Times Faster than Immersion Cleansing

Feb 01, 2017 | Seika Machinery now carries the SAWA PIBW-T100L Bubble Washer System. The system provides effective cleansing with the surface active agent-free electrolysis water and eco-friendly SAWA Pica SNW-H20 alkaline solvent.

Seika Machinery to Bring New Kawaski Dual Arm SCARA Robot to APEX

Jan 11, 2017 | Seika Machinery today announced plans to introduce the new duAro Dual-arm SCARA Robot during the IPC APEX EXPO. The Kawasaki robot with two coaxial arms will be on display in Booth #2409.

duAro Dual-arm SCARA Robot.

New SAWA Ultrasonic Squeegee Cleaner Presents New Solution for Lead-Free Pastes

Jan 10, 2017 | Seika Machinery is pleased to introduce the new SAWA SC-145GAE Ultrasonic Squeegee Cleaner. The system presents a new solution for lead-free solder pastes for squeegees as well as other tools such as scrapers, spatulas and misprinted PCBs.

SAWA SC-145GAE Ultrasonic Squeegee Cleaner.

Explore Industry-Leading Equipment from Seika Machinery at APEX

Jan 09, 2017 | Seika Machinery will exhibit in Booth #2409 at the 2017 IPC APEX EXPO, scheduled to take Feb. 14-16, 2017 at the San Diego Convention Center in Calif. Seika will showcase a complete line up of leading-edge equipment, including the McDry HM-100BNF N2 Auto-Purge Model, Sawa Ecobrid SC-AH100 Fully Automatic Low-VOC Stencil Cleaner, Sayaka CT23NJ PCB Router, HIOKI FA1240 Flying Probe Tester, DEN-ON RD500V, UNITECH UC-250M-CV PCB Board Cleaner, MALCOM RCX Series and PCU-02V Spiral Viscometer.

Seika Machinery to Bring a Modular Reflow Oven Profiling System to SMTA Guadalajara

Sep 12, 2016 | Seika Machinery will exhibit at the SMTA Guadalajara Expo & Tech Forum, scheduled to take place Oct. 5-6, 2016 at Hotel Riu Guadalajara. The Malcomtech RCX Series Modular Reflow Oven Profiling System will be displayed at the show.

Malcomtech RCX Series Modular Reflow Oven Profiling System.

Attend the SMTA Ambassador Reception during SMTAI

Sep 08, 2016 | Seika Machinery announces that Michelle Ogihara, Seika’s Senior Sales Manager and SMTA Director, along with Krissy Ohnstad, Director of Membership for the SMTA, will host the SMTA Ambassador Reception, scheduled to take place during the SMTA International Conference & Exhibition. The reception will be held on Wednesday, September 28, 2016 at 4:30 p.m. in the South Foyer, near room 43.

Attend the 7th Annual SMTA Women’s Leadership Program at SMTAI

Sep 01, 2016 | Seika Machinery announces that Michelle Ogihara, Senior Sales Manager at Seika and SMTA Director & VP of Communications, will help to host the Surface Mount Technology Association (SMTA) Women’s Leadership Program at SMTA International. The event is scheduled to take place Monday, September 26, 2016 at 2 p.m. in Room 48 at the Donald Stephens Convention Center in Rosemont, IL.

Seika Announces Special Show Floor Pricing for the Sawa Handy Cleaner and McDry Cabinet at SMTAI

Aug 30, 2016 | Seika Machinery will exhibit in Booth #506 at SMTA International, scheduled to take place September 27-28, 2016 at the Donald Stephens Convention Center in Rosemont, IL. Special show floor prices will be offered on the Sawa Handy Cleaner and select McDry products.

The RD-500V Rework Station.

Seika’s Michelle Ogihara to Co-Chair the Moisture-Sensitive Device Council Meeting at SMTAI

Aug 24, 2016 | Seika Machinery announces that Michelle Ogihara, Senior Sales Manager, will co-chair the Moisture Sensitive Device (MSD) Council meeting during the upcoming SMTA International Conference & Exhibition. The meeting is scheduled to take place Tuesday, September 27, 2016 at 3 p.m. in room #60 in the conference area. The council welcomes all interested parties seeking solutions to their MSD issues to come with questions.

Seika Machinery Debuts the Malcom SP-2 Wetting Tester

Jul 13, 2016 | Seika Machinery is pleased to introduce the Malcom SP-2 Wetting Tester. The SP-2 helps to test the wettability of solder paste and components while actually simulating the SMT mounting and reflow process.

Malcom SP-2 Wetting Tester.

Seika Machinery Now Carries the Malcom SWB-2 Automatic Wetting Balance Tester

Jul 07, 2016 | Seika Machinery is pleased to introduce the Malcom SWB-2 Automatic Wetting Balance Tester. The automated solution has been designed for measuring the wetting force of your through-hole components using wave solder.

Malcom SWB-2 Automatic Wetting Balance Tester.

Temperature & Humidity Logging Is Now Available on Seika’s McDry Cabinets

Jul 02, 2016 | Seika Machinery today announced that Dickson Data’s TM325 Display Temperature & Humidity Logger is now available for all McDry cabinets.

Dickson Data’s TM325 Display Temperature & Humidity Logger.

Seika Machinery Increases Its Technical Support

Jun 28, 2016 | Seika Machinery today announced that is has expanded its technical support offering. Now, the company has technical service centers at its Atlanta and San Francisco branches.

Seika Machinery Announces DEN-ON Rework Systems Sale

Apr 20, 2016 | Seika Machinery has announced a limited time special on all DEN-ON INSTRUMENTS CO., LTD. SMD rework stations. DEN-ON is offering significant savings on their new generation RD-500V/SV models, as well as their legacy workhorse RD-500III/SIII series, valid now until the end of August 2016.

RD-500V.

Seika Machinery Receives Top Global Distributor Award for McDry Cabinets

Mar 18, 2016 | Seika Machinery is pleased to announce that it received the award for ‘McDry Top Distributor 2010-2015’ from ERC., Co., Ltd. Ban Saito of ERC Co., Ltd. presented the award to Michelle Ogihara during Seika’s award ceremony that took place Wednesday, March 16 at 9 a.m. in Seika Machinery’s booth on the show floor.

Seika Machinery Presents 2015 Sales Awards during APEX

Mar 16, 2016 | Seika Machinery today announced that it recognized its five top representatives with sales awards during the recent IPC APEX EXPO in Las Vegas.

Seika Machinery Picks up Two NPI Awards during APEX

Mar 15, 2016 | Seika Machinery announces that it was awarded two 2016 NPI Awards during a Tuesday, March 15, 2016 ceremony that took place at the Las Vegas Convention Center during the IPC APEX EXPO. Seika won for the following categories: Cleaning equipment for the Unitech UC-250M-CV Board Cleaner and Process Control Tools for the Malcomtech RCX Series Modular Reflow Oven Profiling System.

The UC-250M-CV Board Cleaner.

Seika Machinery Announces Two Major Product Introductions at APEX

Mar 10, 2016 | Seika Machinery will debut two additional new products at the 2016 IPC APEX EXPO. A new McDry Cabinet and Eightech reflow soldering system will be introduced at the show.

The new McDry HM-1001BNF N2 Auto-Purge Model features an ultra-low humidity rapid dehumidication drying unit.

Seika Machinery to Display More than 20 SMT Systems at APEX

Feb 16, 2016 | Seika Machinery will exhibit in Booth #1145 at the 2016 IPC APEX EXPO, scheduled to take place March 15-17, 2016 at the Las Vegas Convention Center. The Seika team will be available to demonstrate industry-leading equipment from Sayaka, Hioki, SAWA, McDry, Eightech, Unitech, Andes, MALCOM and DENON INSTRUMENTS.

RD-500V Rework Station.

Seika Machinery Now Offers the MALCOM PCU-02VSpiral Viscometer for Testing Expensive Materials

Jan 25, 2016 | Seika Machinery is pleased to introduce the MALCOM PCU-02V Spiral Viscometer. PCU-02V is designed for expensive material testing and analysis by obtaining the viscosity characteristics with only a 0.2cc sample.

MALCOM PCU-02VSpiral Viscometer.

Seika Machinery Introduces the MALCOM DS-10 Dip Tester

Jan 25, 2016 | Seika Machinery is pleased to introduce the MALCOM DS-10 Dip Tester. The tester provides data transmission to a PC by USB cable, creating a profile function. The dedicated software implements a high level of process management.

MALCOM DS-10 Dip Tester.

Seika Machinery Announces Year-end Sale – Extra Discounts on McDry Inventory

Nov 04, 2015 | Seika Machinery is pleased to announce a special sale, effective immediately. Seika is offering significant savings on its McDry Ultra-Low Humidity Storage Cabinets while supplies last. All inventory McDry cabinets will be quoted with extra year-end discounts.

McDry cabinets.

Seika Machinery Will Exhibit the Latest SMT Solutions at SMTAI

Aug 27, 2015 | Seika Machinery will exhibit in Booth #707 at SMTA International, scheduled to take place Sep. 29 - 30, 2015 at the Donald Stephens Convention Center in Rosemont, IL. The Seika team will be available to demonstrate the following equipment: DEN-ON INSTRUMENTS CO., LTD. RD-500V Rework Station, UNITECH UC-250M-CV PCB Board Cleaner, MALCOM SPS Solder Paste Mixer and MALCOM Spiral Viscometer.

DEN-ON INSTRUMENTS CO., LTD. RD-500V Rework Station.

Seika Machinery Will Exhibit the Latest SMT Solutions at SMTAI

Aug 27, 2015 | Seika Machinery will exhibit in Booth #707 at SMTA International, scheduled to take place Sep. 29 - 30, 2015 at the Donald Stephens Convention Center in Rosemont, IL. The Seika team will be available to demonstrate the following equipment: DEN-ON INSTRUMENTS CO., LTD. RD-500V Rework Station, UNITECH UC-250M-CV PCB Board Cleaner, MALCOM SPS Solder Paste Mixer and MALCOM Spiral Viscometer.

The RD-500V Rework Station features a two mega pixel full HD camera with a 19

Seika Machinery Introduces the MALCOM VDM-2 Video Capture System

Aug 20, 2015 | Seika Machinery introduces the MALCOM VDM-2 Video Capture System. Used in conjunction with MALCOM Reflow Simulators, the VDM-2 camera system captures video of the simulated reflow process.

MALCOM VDM-2 Video Capture System.

Attend the Sixth Annual SMTA Women’s Leadership Reception at SMTAI

Aug 20, 2015 | Seika Machinery,announces that Michelle Ogihara, Senior Sales Manager at Seika and SMTA Director & VP of Communications, will host the Surface Mount Technology Association (SMTA) Women’s Leadership Connection Reception at SMTA International. The reception is scheduled to take place Monday, Sept. 28, 2015 from 5-6:30 p.m. in Room 42/43 at the Donald Stephens Convention Center in Rosemont, IL.

Seika Machinery Now Carries the MALCOM RDT-250C Reflow Simulator

Jul 06, 2015 | Seika Machinery now carries the MALCOM RDT-250C Reflow Simulator. The system can reproduce the temperature profile of a reflow oven while allowing operators to observe the melting state of solder paste and record the process.

MALCOM RDT-250C Reflow Simulator.

Seika Machinery Announces Limited Time Offer on Select DEN-ON SMD Rework Stations

Jun 29, 2015 | Seika Machinery has announced a limited time special on select DEN-ON INSTRUMENTS CO., LTD. SMD rework stations. DEN-ON is offering 25 percent off regular pricing for the RD-500III and RD-500SIII SMD Rework station series valid now until the end of August 2015.

DEN-ON INSTRUMENTS CO., LTD. SMD rework stations.

Seika Machinery Appoints Michelle Ogihara to Branch Manager of Its New San Francisco Office

May 14, 2015 | Seika Machinery announces that Michelle Ogihara, Senior Sales & Marketing Manager, has been appointed the Branch Manager of its new San Francisco office. Her recent promotion and added responsibility for Seika will include handling Malcomtech, Unitech and Eightech equipment in addition to current Seika Machinery solutions.

Michelle Ogihara, Senior Sales & Marketing Manager.

Seika Machinery and Malcomtech Announce Recent Merger and San Francisco Office

Apr 06, 2015 | Seika Machinery announces that effective April 1, 2015, Malcomtech International is a part of Seika Machinery, Inc. (SMI), based in Torrance, CA.

Seika Machinery Introduces McDry HM-1002BN Nitrogen Auto-Flow Cabinet

Mar 18, 2015 | Seika Machinery introduces the new McDry HM-1002BN Nitrogen Auto-Flow Cabinet.

McDry HM-1002BN Nitrogen Auto-Flow Cabinet.

Seika Machinery Presented 2014 Sales Awards during IPC APEX EXPO

Mar 05, 2015 | Seika Machinery today announced that it honored its five top representatives with sales awards at the recent IPC APEX EXPO in San Diego.

Steve Kirby and Allen Siebenthall of Kirby & Demarest earned the 1st place SAYAKA 2014 sales award from Seika Machinery Inc.

DEN-ON INSTRUMENTS Appoints Seika Machinery as Its Distributor in North America

Feb 10, 2015 | DEN-ON INSTRUMENTS has appointed Seika Machinery, Inc. as its distributor for North America, effective immediately. Seika Machinery is a leading provider of advanced machinery, materials and engineering services.

Seika Machinery to Unveil Four New Systems at APEX

Feb 09, 2015 | Seika Machinery today announced that it will debut four new products at the IPC APEX EXPO. New products to be displayed include the McDry DXU-580YF Yamaha Feeder Cabinet, Musashi Engineering’s SuperΣ and AeroJet, and Hitachi Giken’s NEO VIEW Visual Inspection Support System.

McDry DXU-580YF Yamaha Feeder Cabinet.

Seika Machinery to Demo New Rework and Conformal Coating Systems at APEX

Jan 22, 2015 | Seika Machinery will debut the RD-500V Rework Station from DEN-ON INSTRUMENTS CO., LTD. in Booth #3701 at the IPC APEX EXPO, scheduled to take place Feb. 24-26, 2015 at the San Diego Convention Center in California. The all-in-one advanced technology SMT rework station is compatible with all kinds of rework and SMT component types, including 01005s.

RD-500V Rework Station.

Seika Machinery Begins Year End Special for the SAYAKA PCB Routers

Nov 13, 2014 | Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, announces that the SAYAKA SAM Series of PCB routers is on sale for the year-end special. Seika is offering significant savings on its SAM-CT23Q and other SAYAKA PCB routers while supplies last.

SAYAKA SAM-CT23Q

Seika Announces Year-End Special on the McDry DXU-1001

Nov 11, 2014 | Seika Machinery, Inc. announces a year-end special on the McDry DXU-1001.

Seika Machinery to Debut RD-500V All-In-One Rework Station at SMTAI

Aug 26, 2014 | Seika Machinery, Inc. will debut the RD-500V Rework Station from DEN-ON INSTRUMENTS CO., LTD. in Booth #835 at SMTA International, scheduled to take place Sep. 30 - Oct. 1, 2014 at the Donald Stephens Convention Center in Rosemont, IL.

RD-500V Rework Station

See Seika Machinery’s RD-500V during the Tech Tours at SMTAI

Aug 25, 2014 | Seika Machinery, Inc. today announced that the RD-500V Rework Station from DEN-ON INSTRUMENTS CO., LTD. will be part of the Tech Tours during SMTA International, scheduled to take place Sep. 30 - Oct. 1, 2014 at the Donald Stephens Convention Center in Rosemont, IL.

RD-500V Rework Station

Join the Fifth Annual SMTA Women’s Leadership Reception at SMTAI

Aug 20, 2014 | Seika Machinery, Inc. announces that Michelle Ogihara, Senior Sales Manager at Seika and SMTA Director, VP of Communications, will host the Surface Mount Technology Association (SMTA) Women’s Leadership Connection Reception at SMTA International.

SMTA Ambassador Reception to Be Held during SMTAI

Jul 14, 2014 | Seika Machinery, Inc. announces that Michelle Ogihara, Seika’s Senior Sales Manager and SMTA Director, along with Krissy Ohnstad, Director of Membership for the SMTA, will host the SMTA Ambassador Reception, scheduled to take place during the SMTA International Conference & Exhibition.

Seika Machinery Supports the SMTA 30th Anniversary Party as a Gold Sponsor

Jun 27, 2014 | Seika Machinery is a gold sponsor for the SMTA's 30th anniversary party. The SMTA will celebrate 30 years of building skills, sharing practical experience and developing solutions in the industry. SMTA members will come together to celebrate with an anniversary dinner and Oktoberfest party during SMTA International.

Seika Machinery Now Offers UNITECH UC-250M-CV PCB Board Cleaner

Apr 29, 2014 | Seika Machinery, Inc. announces that it now distributes the UNITECH UC-250M-CV PCB Board Cleaner.

UC-250M-CV

Seika Machinery Announces Top McDry Sales Representatives

Apr 28, 2014 | Seika Machinery, Inc. is announces its top McDry sales representatives for 2013.

From left to right: Ban Saito, ERC, Michelle Ogihara, Seika, Tom Wittmer, WittcoSales, Robert Wood, Seika, Todd Wittmer, WittcoSales, and Koichi Koba, Seika

Horizon Sales Named Top Sayaka Sales Representative for Seika in 2013

Apr 23, 2014 | Seika Machinery, Inc. awarded Horizon Sales first place for achieving the highest Sayaka sales in 2013.

From left to right: Michelle Ohighara, Seika, Yoshi Kanayama, Seika, Kathleen Thompson, Horizon Sales, David Trail, Horizon Sales, and Koichi Koba, Seika

Seika Machinery’s 20th Anniversary Celebration Was a Huge Success

Apr 07, 2014 | Seika Machinery, Inc., today announced that its 20th anniversary celebration held during the recent IPC APEX EXPO was a huge success.

Taiko drum presentation held at the IPC APEX EXPO

Circuits Assembly Awards Seika Machinery for Test & Inspection – ICT

Mar 26, 2014 | Seika Machinery, Inc.announces that it has been awarded a 2014 NPI Award in the category of Test & Inspection – ICT for its HIOKI FA1240 Flying Probe Tester.

HIOKI FA1240 Flying Probe Tester.

MARLIN BUSINESS SERVICES CORP., UNION BANK AND SEIKA MACHINERY, INC. LAUNCH NEW FINANCING PROGRAM New Alliance Will Enable Seika’s Customers to Acquire Advanced Machinery for Manufacturing

Mar 24, 2014 | Marlin Business Services Corp.®, Union Bank, N.A., and Seika Machinery, Inc (SMI), have formed a strategic alliance that will provide financing solutions for SMI’s advanced machinery customers.

Hioki’s Hiroshi Yamazaki to Present at the IPC APEX EXPO

Mar 18, 2014 | Seika Machinery, Inc. today announced that Hiroshi Yamazaki, Assistant Manager at Hioki E.E. Corporation, will present during the APEX 2014 Technical Conference Session Test II on Thursday, March 27, 2014 from 10 a.m.-12 p.m. at the Mandalay Bay Convention Center in Las Vegas, NV.

Pages: 1 2 3 4

Company Information:

Seika Machinery, Inc.

Seika Machinery provides electronics manufacturers with advanced machinery, superior materials and engineering services including Automated Test Equipment, SMTA assembly equipment and QA products

Torrance, California, USA

Cleaning, Distributor, Drilling/Routing, Inspection

  • Phone 310-540-7310
  • Fax 310-540-7930

Seika Machinery, Inc. website

Company Postings:

(4) products in the catalog

(194) news releases

(1) job posting

Facility Closure

pcb components vacuum pick up