SMT, PCB Electronic Industry News

SMT, PCB Electronics Assembly Manufacturing News

Stay informed with latest electronics manufacturing news added by SMTnet members. If your company released a new product, received an award, or expanded its business, share the news!


  • SMTnet
  • »
  • SMT, PCB Electronics Industry News

14797 EMS News Stories.

per page

Universal's Innova Feeder Delivers High-Speed Bare Die to Mainstream Manufacturing

Mar 21, 2011 | Universal Instruments is embracing the convergence era of electronics assembly with the introduction of the Innova and Innova + direct die feeders. This revolutionary technology enables the presentation of wafer-level devices to Universal's GenesisSC Platform without incurring costly packaging charges.

Universal Instruments Corporation

The Innova family allows for the installation of multiple feeders on a single placement machine with minimum feeder slot consumption.

Universal Instruments Corporation

Universal Instruments is a global leader in the design and manufacture of advanced automation and assembly equipment solutions for the electronics manufacturing industry.

Conklin, New York, USA

Manufacturer of Assembly Equipment, Pick and Place

Creation Technologies Turns 20

Mar 18, 2011 | Leading Electronics Manufacturer Celebrates 20 Years of Enriching Lives

Creation Technologies

Creation Technologies

A Top-25 global EMS provider headquartered in Burnaby, BC, Canada

Burnaby, British Columbia, Canada

Assembly, Design, Contract Manufacturer

See Aqueous Technologies’ Trident LD and eSPC Software at the SMTA Intermountain Expo & Tech Forum

Mar 17, 2011 | Aqueous Technologies Corp., North America’s largest provider of batch defluxing systems, will highlight the Trident LD and eSPC Software at the upcoming SMTA Intermountain Chapter Expo & Tech Forum, scheduled to take place Tuesday, March 22, 2011 at Boise State University in Boise, ID.

Aqueous Technologies Corporation

The Trident LD is capable of removing all flux residues including rosin, no-clean and water soluble.

Aqueous Technologies Corporation

Manufacturer of aqueous-based defluxing equipment, cleanliness testing equipment, and stencil cleaning equipment.

Rancho Cucamonga, California, USA

Cleaning

Techcon Systems Appoints Experienced Distributor for South China

Mar 17, 2011 | Techcon Systems, a product group of OK International and a leading provider of fluid dispensing systems and products, has appointed Topoint as its distributor for South China.

Techcon Systems

Thomas Yin, CEO of Topoint

Techcon Systems

Techcon offers a wide array of fluid dispensing products and provides dispensing components ranging from disposable accessories to complete microprocessor-controlled dispensing systems, and precision valves.

Cypress, California, USA

Manufacturer of Assembly Equipment, Adhesives/Dispensing

Count On Tools Introduces Replacement Pace Pre-Filters

Mar 17, 2011 | Count On Tools Inc. announces the release of Pace Replacement Pre-Filters (OEM Part Number 8883-0111-P5) for Arm-Evac and Lab-Evac 105/200/250 fume extraction filtration systems. The replacement pre-filters provide up to 30 percent savings over original Pace Pre-Filters, making production more affordable.

Count On Tools, Inc.

The Count On Tools Pacer Replacement Pre-Filters are low-efficiency particle filters used to protect the primary HEPA filter from large, coarse particles.

Count On Tools, Inc.

COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.

Gainesville, Georgia, USA

Manufacturer of Assembly Equipment, Manufacturer of Assembly Material, Pick and Place, Repair/Rework, Contract Manufacturer

Viscom and CyberOptics Announce Cooperation Agreement for 3D Solder Paste Inspection Sensor Technology

Mar 17, 2011 | Viscom AG and CyberOptics jointly announce an OEM agreement to equip Viscom’s SPI inspection systems product line with CyberOptics’ 3D SPI sensor technology. The development and supply agreement allows for the integration of CyberOptics SE500 sensor technology into the Viscom PCB inspection platforms.

Viscom AG

The first available Viscom solution with the CyberOptics SE500 sensor head is the Viscom S3088 SPI.

Viscom AG

A leading provider of industrial image processing (AOI and AXI) Automated Optical and X-ray inspection equipment.

Hanover, Germany

Inspection

OK International will showcase assembly and rework technology advances at IPC/ APEX EXPO 2011

Mar 17, 2011 | The OK International team will display and demonstrate its full range of soldering and production assembly technologies at this year’s IPC/APEX Expo in Las Vegas, April 12-14. These industry-leading solutions will be fully operational at booth # 1634, including advanced soldering, desoldering and rework systems, programmable pre-heaters, fume extraction and a comprehensive range of dispensing technologies.

OK International

APR-5000-XLS Array Package Rework System

OK International

OK International is the leading manufacturer of tools for the electronics assembly work bench. Our family of products include soldering, rework, fluid dispensing and fume extraction systems.

Cypress, California, USA

Manufacturer of Assembly Equipment, Adhesives/Dispensing, Repair/Rework, Soldering, OEM

Rehm to showcase convection & condensation soldering expertise at Apex

Mar 17, 2011 | Rehm Thermal Systems is preparing to showcase its advanced thermal technologies at this year’s Apex exhibition, being held in Las Vegas from 12th – 14th April. As the only single source for convection and condensation soldering systems, Rehm will be demonstrating its unique capabilities from Booth 635.

Rehm Thermal Systems GmbH

Condenso - Reflow Condensation Soldering System

Rehm Thermal Systems GmbH

Manufacturer of convection reflow ovens, vapor phase ovens, convection curing, and IR curing ovens.

Blaubeuren-Seissen, Germany

Manufacturer of Assembly Equipment

Polyonics Introduces XF-604, a Flame Retardant Polyester Label Material

Mar 17, 2011 | Polyonics introduces the XF-604, a 2 mil white polyester, halogen free label material designed and recognized by Underwriters Laboratories to meet the VTM-1 level of flame retardants per the UL94 standard. The addition of the XF-604 to the FLAMEGARDTM product family provides customers with a lower cost alternative to the XF-603 (polyimide) while still exhibiting flame retardant properties.

Polyonics, Inc.

Polyonics, Inc.

Manufacturer of high performance label material & tags, which survive the harshest industrial environments.

Westmoreland, New Hampshire, USA

Manufacturer of Components

ZESTRON Announces Production Specialties as New Sales Representative

Mar 16, 2011 | ZESTRON America is pleased to announce that Production Specialties is now representing its superior line of chemistries, proven vapor recovery devices, and process services in Northern California.

ZESTRON Americas

ZESTRON Americas

The globally leading provider of high precision cleaning products, services and training solutions in the electronics and semiconductor manufacturing industries.

Manassas, Virginia, USA

Cleaning, Test Services, Training Provider

Consult LED Thermal Management Expert

Mar 16, 2011 | Free Consultation with Clemens Lasance at IPC Vegas

Saturn Electronics Corporation

Saturn Electronics Corporation

Providing production and prototype, SEC offers advanced technologies like LED thermal management, heavy copper, PTFE for RFMW, open and internal cavities and blind and buried vias that are certified to a diverse set of industries.

Romulus, Michigan, USA

Manufacturer of Bare PCBs, CAD, Test Services, Service Provider

DIVSYS International Busy at APEX 2011

Mar 16, 2011 | DIVSYS International, LLC folks will be busy at the IPC APEX show in Las Vegas this year. DIVSYS has developed an excellent relationship with GM Components Holdings, LLC (GMCH), a potential source of production for ceramic boards and thick film hybrids. DIVSYS will also be competing for the 2011 Circuits Assembly Service Excellence Award that will be announced on the first evening of the show, and Tammie Fish speaking at the Women in Electronics Breakfast!

DIVSYS International, LLC

DIVSYS International, LLC

Indianapolis-based PCB Sales, PCB Product Assurance Testing. Lab Svs.to validate boards before you assemble them. Technical Experts who can actually assist you with board issues.

INDIANAPOLIS, Indiana, USA

Manufacturer of Assembled PCBs, Test Services

XJTAG now available with a free Layout Viewer

Mar 16, 2011 | XJTAG today announced the release of XJTAG version 2.5, which now includes a free layout viewer. The XJTAG Layout Viewer has been designed to improve productivity by allowing engineers to quickly visualise the exact location of faults.

XJTAG

The XJTAG Layout Viewer has been designed to improve productivity by allowing engineers to quickly visualise the exact location of faults.

XJTAG

XJTAG provides a full range of JTAG products to help you debug board designs with BGAs, test hardware that includes FPGAs, CPLDs, DSPs or microprocessors.

Cambridge, United Kingdom

Software Manufacturer

Atg Luther & Maelzer Group of Everett Charles Technologies to Launch New A1b Flying Probe Test System at IPC APEX 2011

Mar 15, 2011 | Atg Luther & Maelzer Gmbh will use the IPC APEX EXPO to launch its new A1b Flying Probe Test System to the North American market. The tester will be on display in Everett Charles Technologies’ Booth #447.

atg Luther & Maelzer GmbH

A1b Flying Probe Test System

atg Luther & Maelzer GmbH

With more than 150 employees worldwide, atg Luther & Maelzer is the leading supplier of electrical testing solutions for Printed Circuit Board industry.

Wertheim, Germany

Manufacturer of Assembled PCBs

Juki’s Gerry Padnos to Present during IPC APEX EXPO 2011

Mar 15, 2011 | Juki Corporation, a world-leading provider of automated assembly products and systems, announces that Gerry Padnos, Director of Technology, will present a paper titled "Improving Efficiency with Root Cause Failure Analysis" at the upcoming IPC APEX EXPO.

Juki Automation Systems

Gerry Padnos, Juki's Director of Technology.

Juki Automation Systems

Juki is one of the worlds leading SMT placement companies with over 25000 machines installed worldwide and is the pioneer of the modular automated assembly line.

Morrisville , North Carolina, USA

Manufacturer of Assembly Equipment, Inspection, Pick and Place, Screen Printing, Soldering

Aqueous Technologies to Demonstrate New Trident eSPC Software at the SMTA Atlanta Expo & Tech Forum

Mar 15, 2011 | Aqueous Technologies Corp. will demonstrate the new Trident eSPC Software at the upcoming SMTA Atlanta Expo & Tech Forum

Aqueous Technologies Corporation

Aqueous Technologies Corporation

Manufacturer of aqueous-based defluxing equipment, cleanliness testing equipment, and stencil cleaning equipment.

Rancho Cucamonga, California, USA

Cleaning

ACL Awards “Rep of the Year” to Restronics Northland

Mar 15, 2011 | Minneapolis, MN, March 15, 2011 -- REStronics Northland Co. Inc. has announced the recent award of “Representative of the Year 2010” given by ACL Inc.

REStronics

REStronics

Manufacturer's Representative for equipment for PCB assembly and/or rework processes.

Minnetonka, Minnesota, USA

Panasonic to Introduce New PanaCIM® Enterprise Edition Version 8.3 at APEX

Mar 15, 2011 | Panasonic Factory Solutions Company of America will introduce the latest version of its PanaCIM® Enterprise Edition manufacturing execution system (MES) software at APEX 2011.To further support customers with mixed-vendor production lines, the PanaCIM Enterprise Edition fully integrated software suite has been expanded to include additional equipment from non-Panasonic vendors.

Panasonic Factory Solutions Company of America (PFSA)

PanaCIM Enterprise Edition MES

Panasonic Factory Solutions Company of America (PFSA)

PFSA develops and supports innovative manufacturing automation equipment, processes and solutions around the core of electronic assembly, microelectronic, software and circuit manufacturing

Rolling Meadows, Illinois, USA

Manufacturer of Assembly Equipment, Pick and Place, OEM

Test Equipment Connection Europe S.P.R.L., based in Belgium, is now operational.

Mar 15, 2011 | Test Equipment Connection Corporation announced today that Test Equipment Connection Europe S.P.R.L., based in Belgium, is now operational.

Test Equipment Connection

Test Equipment Connection

The Worlds Largest Distributor of New, Refurbished, and Second Hand Electronic Test and Measurement (T&M) Equipment.

Lake Mary, Florida, USA

Manufacturer of Assembly Equipment, Inspection, Equipment Dealer / Broker

See the Latest Cleaning Products for Every Process from Kyzen at the SMTA Intermountain Expo & Tech Forum

Mar 14, 2011 | Kyzen will showcase products for every process at the upcoming SMTA Intermountain Chapter Expo & Tech Forum, scheduled to take place Tuesday, March 22, 2011 at Boise State University in Boise, ID.

KYZEN Corporation

KYZEN Corporation

A leading supplier of precision cleaning chemistries to the worldwide electronics, metal finishing, medical, semiconductor, and optical industries.

Nashville, Tennessee, USA

Cleaning

See Milara’s Next-Generation Printing Equipment at IPC APEX EXPO 2011

Mar 14, 2011 | Milara will showcase its latest printing and placement equipment in Booth #1873 at the upcoming IPC APEX EXPO, scheduled to take place April 12-14, 2011 at the Mandalay Bay Resort & Convention Center in Las Vegas.

Milara Inc

The TD2929-3D system is optioned for either 2D (standard) or 3D post-print inspection.

Milara Inc

The Company is dedicated to the development, manufacturing, servicing and/or licensing of manual, semi automatic and automatic stencil/screen printers, dispensers, and wafer printers for the Surface Mount Technology (SMT) and Semiconductor Industries

Medway, Massachusetts, USA

Manufacturer of Assembled PCBs

R&D Technical Services to Debut Updated RD1 Reflow System at IPC APEX EXPO 2011

Mar 14, 2011 | Vapor phase manufacturer R&D Technical Services Inc. will debut its updated RD1 Batch Type Vapor Phase Reflow System in Booth #2635 at the upcoming IPC APEX EXPO, scheduled to take place April 12-14, 2011 at the Mandalay Bay Resort & Convention Center in Las Vegas.

R&D Technical Services, Inc.

RD1 Batch Type Vapor Phase Reflow System.

R&D Technical Services, Inc.

R&D Technical Services was formed in 1996 to support the Vapor Reflow market and is currently the leading source of Vapor Phase equipment.

Burnsville, Minnesota, USA

Manufacturer of Assembly Equipment

See Inovaxe’s Newest Handling and Inventory Control Systems at IPC APEX EXPO 2011

Mar 14, 2011 | Inovaxe will exhibit its latest storage and handling systems in Booth #764 at the upcoming IPC APEX EXPO, scheduled to take place April 12-14, 2011 at the Mandalay Bay Resort & Convention Center in Las Vegas.

Inovaxe Corporation

The innovative Suitcase-Sized Kit Cart system provides non-dedicated, high-density, flexible component package storage and Web-based inventory control.

Inovaxe Corporation

Inovaxe is focused on developing state-of-the-art Inovative Material Handling Solutions (MHS) for Low-Volume/High-Mix Manufacturing.

Deerfield Beach, Florida, USA

Manufacturer of Assembly Equipment

Nihon Superior to Showcase Advanced Soldering Materials at IPC APEX EXPO 2011

Mar 14, 2011 | Nihon Superior Co. Ltd. will exhibit in Booth #259 at the upcoming IPC APEX EXPO, scheduled to take place April 12-14, 2011 at the Mandalay Bay Resort & Convention Center in Las Vegas.

Nihon Superior Co., Ltd.

SN100C P602 D4 is completely halogen-free, which means there are no intentional additions of the halogens F, Cl, Br or even I hidden in the chemistry.

Nihon Superior Co., Ltd.

Nihon has been a leader in soldering and brazing since 1966. Nihon manufactures SMT solder joining materials e.g. lead-free solder (SN100C:Sn-Cu-Ni-Ge etc): solder paste, solder spheres, flux cored solder wire, solder bar, etc.

Osaka, Japan

Manufacturer of Assembly Material, Soldering

Christopher Associates' Jasbir Bath to Chair Reflow Assembly Session at IPC APEX EXPO

Mar 14, 2011 | Christopher Associates announces that Jasbir Bath, Consulting Engineer, will Chair the session titled "Reflow Assembly" at the upcoming IPC APEX EXPO, scheduled to take place April 12-14, 2011 at the Mandalay Bay Resort & Convention Center in Las Vegas. The session will take place Tuesday, April 12, 2011 from 1:30-3 p.m.

Christopher Associates Inc.

Jasbir Bath, a Consulting Engineer for Christopher Associates.

Christopher Associates Inc.

A pioneering supplier and distributor to the electronics and chemical processing industries.

Santa Ana, California, USA

Inspection

CyberOptics to Debut New Inspection Systems at IPC/APEX 2011

Mar 14, 2011 | CyberOptics Corporation will debut its latest inspection systems in Booth #1749 at the upcoming IPC/APEX conference and exhibition, scheduled to take place April 12-14, 2011 at the Mandalay Bay Resort & Convention Center in Las Vegas.

CyberOptics Corporation

The SE500™ 100 percent 3-D solder paste inspection system has the ability to inspect the most demanding assemblies with a >80 cm2/second inspection speed without compromising measurement accuracy and repeatability.

CyberOptics Corporation

CYBEROPTICS is a global leader in high-precision 3D sensors that significantly improve yields and productivity in the 3D scanning and metrology, Surface Mount Technology & Semiconductor Markets

Minneapolis, Minnesota, USA

Inspection

BTU International to Debut New PYRAMAX Solder Reflow Capabilities at IPC APEX EXPO 2011

Mar 14, 2011 | BTU International will debut its new dual-lane, dual-speed capabilities of the PYRAMAX™ solder reflow system, as well as a next generation flux management system.

BTU International

PYRAMAX™ solder reflow system.

BTU International

Global supplier of advanced thermal processing equipment and processes to the electronics assembly market.

North Billerica, Massachusetts, USA

Manufacturer of Assembly Equipment

SEMA Exhibition in Silicon Valley to Address Solar Manufacturing Technology

Mar 14, 2011 | The Solar Engineering & Manufacturing Association (SEMA) announces the availability of booth space for the 1st SEMA Technical Conference and Exhibition, scheduled to take place May 24-26, 2011 at the Wyndham Hotel in San Jose, CA.

Solar Engineering & Manufacturing Association (SEMA)

Solar Engineering & Manufacturing Association (SEMA)

SEMA is a member-driven educational, technical and professional association serving the solar manufacturing and related industries

Santa Ana, California, USA

Association, Non-Profit

Seika Machinery Inc. Debuts the SAYAKA SAM-CT35Q Large Board PCB Router

Mar 14, 2011 | Seika Machinery, Inc. introduces the SAYAKA SAM-CT35Q Large Board Model.

Seika Machinery, Inc.

The SAYAKA SAM-CT35Q is a tabletop, automatic precision PCB router. The compact size and weight of the system make it ideal for limited work spaces and versatility in a production line setup.

Seika Machinery, Inc.

Seika Machinery provides electronics manufacturers with advanced machinery, superior materials and engineering services including Automated Test Equipment, SMTA assembly equipment and QA products

Torrance, California, USA

Cleaning, Drilling/Routing, Inspection, Distributor

Qual-Pro achieves UL 508A certification; can now build UL certified electrical panels

Mar 14, 2011 | Qual-Pro Corporation today announced that the company was awarded UL 508A certification.

Qual-Pro Corporation

Qual-Pro Corporation

Qual-Pro is an Electronics Manufacturing Service (EMS) provider. We have built electronics for others since 1971.

Gardena, California, USA

Manufacturer of Assembly Material, Manufacturer of Assembled PCBs, Assembly, Pick and Place, Contract Manufacturer

See Aqueous Technologies’ Latest Cleaning Equipment at IPC APEX EXPO 2011

Mar 11, 2011 | Aqueous Technologies Corp. announces that it will feature its leading cleaning equipment in Booth #641 at the upcoming IPC APEX EXPO, scheduled to take place April 12-14, 2011 at the Mandalay Bay Resort & Convention Center in Las Vegas.

Aqueous Technologies Corporation

The Trident Duo High-Yield Automatic Defluxing and Cleanliness Testing System provides a cost-effective alternative to inline defluxing systems.

Aqueous Technologies Corporation

Manufacturer of aqueous-based defluxing equipment, cleanliness testing equipment, and stencil cleaning equipment.

Rancho Cucamonga, California, USA

Cleaning

Everett Charles Technologies’ FSG to Introduce Integrated Functional Test Solutions at IPC APEX EXPO 2011

Mar 11, 2011 | Everett Charles Technologies' Fixture Services Group (FSG) will introduce Integrated Functional Test Solutions, its new turnkey product, in Booth #447 at the upcoming IPC APEX EXPO.

Everett Charles Technologies

LEDCHECK™ VIII is an eight channel modular assembly designed specifically for true color testing.

Everett Charles Technologies

ECT is the world's leading manufacturer of POGO ® contact probes for a wide range of applications including industrial, medical, military, connectors and testing bare and loaded printed circuit boards

Pomona, California, USA

Inspection

Kyzen to Showcase Award Winning Products for Every Process at IPC APEX EXPO 2011

Mar 11, 2011 | Kyzen will showcase products for every process in Booth #1439 at the upcoming IPC APEX EXPO, scheduled to take place April 12-14, 2011 at the Mandalay Bay Resort & Convention Center in Las Vegas.

KYZEN Corporation

KYZEN Corporation

A leading supplier of precision cleaning chemistries to the worldwide electronics, metal finishing, medical, semiconductor, and optical industries.

Nashville, Tennessee, USA

Cleaning

MIRTEC to premier its complete line of advanced AOI systems at IPC APEX EXPO 2011

Mar 11, 2011 | MIRTEC will feature an MV-7xi configured with the exclusive 15 Mega Pixel ISIS Vision System and proprietary 3D AOI technology in booth #1925 at the upcoming IPC APEX EXPO.

MIRTEC Corporation

The MIRTEC MV-3L Desktop AOI System is the industry’s most widely accepted five camera desktop AOI system. 

MIRTEC Corporation

Global supplier of Automated Optical Inspection and Solder Paste Inspection Systems to the Electronics Manufacturing Industry.

Oxford, Connecticut, USA

Inspection

Industry Buzzing Over New Free Sessions at IPC APEX EXPO™

Mar 11, 2011 | Very few attendees can — or even try — to take advantage of all of the resources on-site at IPC APEX EXPO, taking place April 12–14, 2011 in Las Vegas. To optimize their time at the event, visitors can get even more questions answered at free educational "BUZZ Sessions" taking place on the show floor. Panelists at these interactive discussion forums will discuss many of the topics keeping the electronics manufacturing industry buzzing.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association, Non-Profit, Events Organizer

Lengths of up to 910 mm: SIPLACE SX sets new placement standards for unusual board sizes

Mar 11, 2011 | With options for long boards, heavy boards and thick boards, the SIPLACE Team is already offering a wide range of placement solutions for boards with unusual dimensions. Electronics manufacturers who use the SIPLACE SX1 or SIPLACE SX2 can now extend the range even further: With the SIPLACE Long Board 910 functionality they are now able for the first time to populate boards that are up to 910 mm (35.8 inches) long in a single, continuous placement process.

Siemens Corporation

Even unusually long PCBs with dimensions of up to 910 x 560 mm can be processed in SIPLACE SX1 and SIPLACE SX2 machines.

Siemens Corporation

Siemens Corporation is a U.S. subsidiary of Siemens AG, a global powerhouse in electronics and electrical engineering, operating in the industry, energy, healthcare, and infrastructure & cities sectors.

Washington, District of Columbia, USA

Manufacturer of Assembly Equipment

Production Solutions to Showcase Complete Board Support Offerings at IPC APEX EXPO 2011

Mar 11, 2011 | Production Solutions Inc., manufacturer of the Red-E-Set Board Support, will showcase its full product line in Booth #351 at the upcoming IPC APEX EXPO, scheduled to take place April 12-14, 2011 at the Mandalay Bay Resort & Convention Center in Las Vegas.

Production Solutions

The RED-E-SET Ultra HD represents the next generation of high-density board supports, designed for those applications requiring greater support during the printing and assembly process.

Production Solutions

Production Solutions, Inc., manufacturer of the RED-E-SET Universal Board Support System for all Printers and Chipshooter, Dispensers and Placement machines.

Poway, California, USA

Manufacturer of Assembly Equipment

FINETECH to Showcase FINEPLACER® core rework system at IPC APEX EXPO 2011

Mar 11, 2011 | FINETECH will highlight the FINEPLACER® core rework system in Booth #1940 at the upcoming IPC APEX EXPO, scheduled to take place April 12-14, 2011 at the Mandalay Bay Resort & Convention Center in Las Vegas.

Finetech

The FINEPLACER® core represents a compact, yet versatile hot-gas rework system withs a level of professionalism that exceeds its attractive price.

Finetech

Finetech manufactures innovative, high-accuracy equipment for leading-edge bonding, micro assembly and rework challenges.

Gilbert, Arizona, USA

Repair/Rework, Soldering

Acculogic to Debut New Test Systems and Services at IPC APEX EXPO 2011

Mar 11, 2011 | Acculogic, Inc. announces that it will highlight its leading testing technologies in Booth #1435 at the upcoming IPC APEX EXPO, scheduled to take place April 12-14, 2011 at the Mandalay Bay Resort & Convention Center in Las Vegas.

Acculogic Inc.

FLS 980Dxi Flying Scorpion™

Acculogic Inc.

Manufacturer of a broad range of systems & instruments for testing electronic devices, circuit boards and more. Products include Boundary Scan (JTAG) test systems and Flying Probe testers.

Markham, Ontario, Canada

Test Services

Cobar Solder Products to Exhibit High-Performance Fluxes at IPC APEX EXPO 2011

Mar 11, 2011 | The Balver Zinn Group announces that Cobar Europe BV will exhibit a complete new range of high-performance low-VOC and VOC-free fluxes in Booth #371 at the upcoming IPC APEX EXPO, scheduled to take place April 12-14, 2011 at the Mandalay Bay Resort & Convention Center in Las Vegas.

Cobar Solder Products Inc.

Cobar Solder Products Inc.

Cobar Solder Products Inc., a member of the Balver Zinn Group, is a recognized global supplier of solder paste, fluxes and related soldering materials for electronics assembly.

AL Breda, Netherlands

Manufacturer of Assembly Material

IPC Study Identifies Costs of SEC Conflict Minerals Due Diligence at 17 Times More than Government Estimates

Mar 11, 2011 | A new study conducted by IPC — Association Connecting Electronics Industries® predicts that reporting requirements for conflict minerals proposed by the U.S. Security and Exchange Commission (SEC) would cost the electronic interconnect industry an estimated $279 million in the first year of implementation for due diligence alone, compared to the government’s estimate of $16.5 million.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association, Non-Profit, Events Organizer

Elastomer Socket for Infineon's BGA221

Mar 11, 2011 | Ironwood Electronics has recently introduced a new high performance BGA socket for 0.4mm pitch 221 ball BGA - SG-BGA7162. The socket operates at bandwidths up to 10 GHz with less than 1dB of insertion loss.

Ironwood Electronics

Ironwood Electronics

Ironwood Electronics, an ISO9001/2000 company, offers a wide selection of high performance adapters and sockets for all the various SMT IC Packages. Fast, high quality quick turn custom projects are o

Burnsville, Minnesota, USA

Design

Count On Tools to Introduce New SMT Nozzles and Consumables at APEX 2011

Mar 11, 2011 | Count On Tools Inc. will introduce its latest developments in SMT nozzles and consumables in Booth #1965 at the upcoming at the upcoming IPC APEX conference and exhibition, scheduled to take place April 12-14, 2011 at the Mandalay Bay Resort & Convention Center in Las Vegas.

Count On Tools, Inc.

Count On Tools supplies a full range of SMT tooling, odd-form component tooling and design services, and other SMT consumables for the electronics manufacturing industry.

Count On Tools, Inc.

COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.

Gainesville, Georgia, USA

Manufacturer of Assembly Equipment, Manufacturer of Assembly Material, Pick and Place, Repair/Rework, Contract Manufacturer

EVS International to Exhibit its Lead-Free EVS 7000 System at IPC APEX EXPO 2011

Mar 11, 2011 | EVS International announces that it will exhibit its EVS 7000LFHS in Booth 1535 at the upcoming IPC APEX EXPO conference and exhibition, scheduled to take place April 12-14, 2011 at the Mandalay Bay Resort & Convention Center in Las Vegas.

EVS International

The Solder Recovery System EVS 7000 provides a closed environment system for the recovery of solder from the solder dross produced during the wave soldering process.

EVS International

World Leaders in Solder Recovery.

Cowes, United Kingdom

Environmental Resources, Soldering

SEHO Systems to Exhibit Leading Soldering Solutions at IPC APEX EXPO 2011

Mar 11, 2011 | SEHO North America, Inc. will showcase its leading soldering systems in Booth #565 at the upcoming IPC APEX EXPO, scheduled to take place April 12-14, 2011 at the Mandalay Bay Resort & Convention Center in Las Vegas.

SEHO Systems GmbH

SEHO's PowerSelective features a modular design, ensuring the highest flexibility.

SEHO Systems GmbH

SEHO develops and manufactures reflow, selective and wave soldering machines for the electronics industry. Since its foundation in 1976, SEHO is worldwide THE contact partner whenever soldering is involved.

Kreuzwertheim, Germany

Manufacturer of Assembly Equipment, Soldering

SMTA Accepting Applications for Board of Directors

Mar 10, 2011 | The SMTA is currently seeking committed individuals for its Board of Directors. Candidates should have valuable skills and ideas to continue our mission of helping members succeed in electronics assembly and related business operations.

Surface Mount Technology Association (SMTA)

Surface Mount Technology Association (SMTA)

The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.

Eden Prairie, Minnesota, USA

Association, Non-Profit, Training Provider, Events Organizer

Everett Charles Technologies’ CPG to Introduce the New Edge™ in Loaded Board Test at the IPC APEX EXPO

Mar 10, 2011 | The Contact Products Group (CPG) of Everett Charles Technologies will display the Edge™ for the first time in Booth #447 at the upcoming IPC APEX EXPO. The Edge™ provides an economical, sharp, aggressive and shallow angle blade tip for reliable via probing on PCBs by incorporating ECT’s patented ZIP® flat technology manufacturing cost advantages.

Everett Charles Technologies

Everett Charles Technologies

ECT is the world's leading manufacturer of POGO ® contact probes for a wide range of applications including industrial, medical, military, connectors and testing bare and loaded printed circuit boards

Pomona, California, USA

Inspection

Seika Debuts the Ecobrid SC-AH100 Low-VOC Stencil Cleaner

Mar 10, 2011 | Seika Machinery introduces the new Sawa Ecobrid SC-AH100 Fully Automatic Low-VOC Stencil Cleaner. The Ecobrid stencil cleaner provides a 66 percent reduction in CO2 emissions and energy consumption over the previously fully automatic cleaning system, as well as a significant reduction in running costs.

Seika Machinery, Inc.

Sawa Ecobrid SC-AH100 Fully Automatic Low-VOC Stencil Cleaner.

Seika Machinery, Inc.

Seika Machinery provides electronics manufacturers with advanced machinery, superior materials and engineering services including Automated Test Equipment, SMTA assembly equipment and QA products

Torrance, California, USA

Cleaning, Drilling/Routing, Inspection, Distributor

KIC to Highlight MVP Profile Fixture at IPC APEX EXPO 2011

Mar 10, 2011 | KIC will highlight its MVP profile fixture in Booth #1964 at the upcoming IPC APEX EXPO conference and exhibition. The MVP profile fixture is ideal for viewing changes in reflow ovens and determining how those changes affect the profile of production boards.

KIC Thermal

The MVP profile fixture is ideal for viewing changes in reflow ovens and determining how those changes affect the profile of production boards.

KIC Thermal

KIC's provides products and services designed to improve a variety of thermal monitoring, profiling and process control applications.

San Diego, California, USA

Software Manufacturer

Juki to Showcase Its Latest Automated Assembly Solutions at IPC APEX EXPO

Mar 10, 2011 | Juki Corporation will showcase its latest assembly systems in Booth #1559 at the upcoming IPC APEX EXPO.

Juki Automation Systems

FX-3 high-speed chip shooter.

Juki Automation Systems

Juki is one of the worlds leading SMT placement companies with over 25000 machines installed worldwide and is the pioneer of the modular automated assembly line.

Morrisville , North Carolina, USA

Manufacturer of Assembly Equipment, Inspection, Pick and Place, Screen Printing, Soldering

  • SMTnet
  • »
  • SMT, PCB Electronics Industry News
Software for SMT

StikNPeel™ Rework Stencils