SMT, PCB Electronic Industry News

SMT, PCB Electronics Assembly Manufacturing News

Stay informed with latest electronics manufacturing news added by SMTnet members. If your company released a new product, received an award, or expanded its business, share the news!


  • SMTnet
  • »
  • SMT, PCB Electronics Industry News

14885 EMS News Stories.

per page

Ersa Announces Versaflow 3 Level II Application Training Course in April

Mar 09, 2015 | Kurtz Ersa today announced that it will hold a two-day ERSA Versaflow 3 Selective Soldering Level II Application Training Course from April 8, 2015 at 1 p.m. until April 10, 2015 at 12 p.m. at its facility in Plymouth, WI. The course will provide students with the knowledge to properly maintain the Versaflow 3 with minimal or no defects with the highest throughput possible.

kurtz ersa Corporation

Versaflow 3 selective soldering machine.

kurtz ersa Corporation

Manufacturer of Selective Soldering Systems, Ersascope BGA Inspection Systems, BGA Rework Systems, Soldering Irons, Wave Solder and Reflow Equipment.

Wertheim, Germany

Manufacturer of Assembly Equipment, Soldering

Bentek Expands Manufacturing Capacity to more than 100,000 ft.2

Mar 09, 2015 | Bentek has expanded its total manufacturing capacity in San Jose, CA. With the addition of a new 50,000 ft.2 facility, Bentek now has more than 100,000 ft.2 of manufacturing capacity.

Bentek Solar

PV marketplaces, has expanded its total manufacturing capacity in San Jose, CA.

Bentek Solar

A leader in manufacturing and engineering solutions for complex electro-mechanical and power distribution systems for the semiconductor and solar industries.

San Jose, California, USA

Manufacturer of Components

Cogiscan Partners with Horizon Sales in the Midwestern U.S.

Mar 09, 2015 | Cogiscan announces the appointment of Horizon Sales as its exclusive sales representative throughout the Midwestern U.S.

Cogiscan Inc.

Dave Trail, President and principal owner of Horizon Sales.

Cogiscan Inc.

Cogiscan provides factory-wide electronics manufacturing traceability (TTC), MSD control, component set up verification, PCB assembly error-proofing, components inventory management.

Bromont, Quebec, Canada

Inspection, Software Manufacturer

General Microcircuits, Inc. (GMI) Earns Certification as Qualified Manufacturer to IPC J-STD-001 and IPC-A-610

Mar 09, 2015 | IPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) to General Microcircuits, Inc. (GMI), an electronics manufacturing company based out of Mooresville. N.C. GMI provides circuit board and integrated assemblies to manufacturers in diverse industries. To earn the QML, GMI successfully completed an intensive audit based on two of IPC's foremost standards: IPC J-STD-001, Requirements for Soldered Electrical and Electronic Assemblies and IPC-A-610, Acceptability of Electronic Assemblies.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association, Non-Profit, Events Organizer

Creation Technologies & Others Selling Excess Assets

Mar 09, 2015 | Baja Bid is conducting an online auction. The bidding period opened on March 2, 2015 and closes on March 18, 2015.

Baja Bid

Baja Bid

BAJA Bid was founded to form an auction organization with the primary objective of providing an outstanding experience for both our buyers and sellers.

Odessa, Florida, USA

Equipment Auctions, Equipment Dealer / Broker

KIC’s MB Allen Receives IPC Distinguished Committee Service Award

Mar 07, 2015 | KIC announces that IPC – Association Connecting Electronics Industries® awarded Marybeth (MB) Allen an IPC Distinguished Committee Service Award during the recent IPC APEX EXPO® in San Diego, CA.

KIC Thermal

Bob Neves, Board of directors of IPC, Chairman & Chief Technology Officer, Microtek Changzhou Laboratories Title Chairman at Greater Asia Pacific, and MB Allen, Product Manager for KIC.

KIC Thermal

KIC's provides products and services designed to improve a variety of thermal monitoring, profiling and process control applications.

San Diego, California, USA

Software Manufacturer

SAMSUNG Awards Torenko & Associates with Top Sales 2014

Mar 07, 2015 | SAMSUNG C&T Automation announces that the recipient of the prestigious Top Sales 2014 award is Torekno & Associates (Ron Torenko, Cesar Acosta and Don Evans).

Hanwha Techwin CO., LTD.

Ron Torenko

Hanwha Techwin CO., LTD.

SCTA develops and offers SMT assembly line solutions and machines for customers in North America. Samsung offers pick and place machines, screen printers, reflow ovens, accessory machines, and software products.

Irvine, California, USA

Manufacturer of Assembly Equipment, Pick and Place, Screen Printing

BTU Names SMarTsol Technologies Rep of the Year during APEX

Mar 07, 2015 | BTU International, Inc., a leading supplier of advanced thermal processing equipment for the electronics manufacturing and alternative energy markets, is pleased to announce that SMarTsol Technologies of Mexico was its top manufacturers’ representative in 2014 for the Americas. Paul Lancaster, BTU’s regional sales manager, presented the award to Ivan Romo, Principal of SMarTsol Technologies S. de R.L. de C.V., during the recent IPC APEX EXPO in San Diego, Calif. SMarTsol brought in the highest revenues in 2014 for BTU in the Americas and increased BTU’s sales in Mexico by 220 percent.

BTU International

Ivan Romo, Principal of SMarTsol Technologies S. de R.L. de C.V., during the recent IPC APEX EXPO in San Diego, Calif.

BTU International

Global supplier of advanced thermal processing equipment and processes to the electronics assembly market.

North Billerica, Massachusetts, USA

Manufacturer of Assembly Equipment

Zollner Invests in Essemtec Dispensing Systems

Mar 07, 2015 | Zollner Elektronik AG, one of the top EMS service providers with 17 locations worldwide, trusts in Essemtecs’ high speed jet dispenser Scorpion.

ESSEMTEC

ESSEMTEC

Essemtec is a worldwide leader in manufacturing of highly flexible Surface Mount Technology (SMT) production equipment - pick-and-place system, dispenser, printer, oven, storage system and software Solutions.

Aesch, ZH, Switzerland

Manufacturer of Assembly Equipment, Component Packaging, Pick and Place, Screen Printing, Soldering

IPC Honors Eight Members with First Annual Dieter Bergman IPC Fellowship Award

Mar 07, 2015 | IPC – Association Connecting Electronics Industries® announced the recipients of the first annual Dieter Bergman IPC Fellowship Award at IPC APEX EXPO® in San Diego, Calif. The IPC Fellowship Award honors IPC members who have exhibited ongoing leadership in developing and promoting IPC and global standardization efforts.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association, Non-Profit, Events Organizer

SolderStar Selects its Range of Advanced Thermal Profiling Solutions to be Exhibited at SMT Hybrid Packaging Hall 7 Stand 516

Mar 07, 2015 | SolderStar Ltd, a world leading specialist manufacturer in the design and development of thermal profiling equipment for the lead-free electronics industry, will be highlighting a number of innovative products, including its latest advancement in selective soldering, at SMT Hybrid Packaging in Nuremberg, Germany from 5 – 7th May 2015.

Solderstar

SolderStar’s Multi-Wave PRO.

Solderstar

SolderStar is one of the world's leaders in thermal management systems, with over a decade of specializing in the design, development and manufacture of thermal profiling equipment for the lead-free electronics industry.

Rochdale, Lancashire, United Kingdom

Soldering, Test Services, OEM, Software Manufacturer

New IPC Study Sheds Light on Labor Shortage in North American Electronics Industry

Mar 05, 2015 | A new study, published by IPC – Association Connecting Electronics Industries® finds evidence that a labor shortage exists for electronics manufacturers and that other business issues make the problem worse for some segments of the industry. Based on data from 107 U.S. and Canadian electronics manufacturers and extensive secondary research, IPC Study of the North American Labor Pool for Electronics Manufacturing assesses the causes of the shortage of qualified labor for electronics manufacturing, and offers solutions.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association, Non-Profit, Events Organizer

Count On Tools Wins a Service Excellence Award for the Second Consecutive Year

Mar 05, 2015 | Count On Tools Inc. (COT) announces that it has been awarded a 2015 Circuits Assembly Service Excellence Award for its outstanding customer ratings, as judged by its own customers. Count On Tools was selected for the Automation and Handling Equipment category. Circuits Assembly Editor-in-Chief, Mike Buetow presented the award to Curt Couch, COT’s President,during the recent IPC APEX EXPO.

Count On Tools, Inc.

Count On Tools, Inc.

COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.

Gainesville, Georgia, USA

Manufacturer of Assembly Equipment, Manufacturer of Assembly Material, Pick and Place, Repair/Rework, Contract Manufacturer

Seika Machinery Presented 2014 Sales Awards during IPC APEX EXPO

Mar 05, 2015 | Seika Machinery today announced that it honored its five top representatives with sales awards at the recent IPC APEX EXPO in San Diego.

Seika Machinery, Inc.

Steve Kirby and Allen Siebenthall of Kirby & Demarest earned the 1st place SAYAKA 2014 sales award from Seika Machinery Inc.

Seika Machinery, Inc.

Seika Machinery provides electronics manufacturers with advanced machinery, superior materials and engineering services including Automated Test Equipment, SMTA assembly equipment and QA products

Torrance, California, USA

Cleaning, Drilling/Routing, Inspection, Distributor

Zollner Invests in Dispensing Systems from Essemtec

Mar 05, 2015 | Zollner Elektronik AG, one of the top EMS service providers with 17 locations worldwide, trusts in Essemtecs’ high speed jet dispenser Scorpion.

ESSEMTEC

Zollner Invests in Dispensing Systems from Essemtec

ESSEMTEC

Essemtec is a worldwide leader in manufacturing of highly flexible Surface Mount Technology (SMT) production equipment - pick-and-place system, dispenser, printer, oven, storage system and software Solutions.

Aesch, ZH, Switzerland

Manufacturer of Assembly Equipment, Component Packaging, Pick and Place, Screen Printing, Soldering

Gen3 Systems Marks 30 Years as a Provider of Solderability, SIR, CAF and Cleanliness Testing

Mar 05, 2015 | Gen3 Systems Limited is pleased to announce the company’s 30th anniversary. Since 1985, Gen3 Systems has been providing training and comprehensive in-house services for solderability, SIR, CAF and cleanliness testing.

Gen3 Systems

Director Graham Naisbitt.

Gen3 Systems

Gen3 Systems is a specialist manufacturer of test and measurement equipment used to help predict reliability of electronic circuits and systems in the field.

Farnborough Hampshire, United Kingdom

Assembly, Cleaning, Inspection, Test Services

Pickering Interfaces Expands Range of 16 Amp PXI Switching Solutions

Mar 05, 2015 | Pickering Interfaces is expanding its range of 16 Amp PXI switching solutions. Following the success of the 16 Amp uncommitted relay modules (model 40-161), the company is introducing the following new 16 Amp PXI module families:

Pickering Interfaces Ltd.

16 Amp PXI power matrix (model 40-552).

Pickering Interfaces Ltd.

Manufacturer of commercial and custom switching systems used in the electronics test market and for imbedded switch systems in OEM equipment.

Essex, United Kingdom

Manufacturer of Components

MIRTEC AWARDS MURRAY PERCIVAL CO ‘MANUFACTURERS’ REPRESENTATIVE ORGANIZATION OF THE YEAR 2014’

Mar 05, 2015 | MIRTEC, “The Global Leader in Inspection Technology,” announces that it has named the Murray Percival Company ‘MIRTEC Manufacturers’ Representative Organization of the Year 2014’. Brian D’Amico, President of MIRTEC Corp., presented the award to the company during the recent IPC APEX EXPO in San Diego, CA.

MIRTEC Corporation

Murray Percival Company ‘MIRTEC Manufacturers’ Representative Organization of the Year 2014’. Brian D’Amico, President of MIRTEC Corp., presented the award.

MIRTEC Corporation

Global supplier of Automated Optical Inspection and Solder Paste Inspection Systems to the Electronics Manufacturing Industry.

Oxford, Connecticut, USA

Inspection

Data I/O Announces New Distribution Partnership with Fuji Machines Asia in SE Asia

Mar 05, 2015 | Data I/O Corporation (NASDAQ: DAIO), the leading provider of manual and automated device programming solutions, announced the company completed a distribution agreement with Fuji Machines Asia Pte. Ltd. Fuji Machines Asia will represent Data I/O in Indonesia, Philippines, Thailand and Vietnam.

Data I/O Corporation

Data I/O Corporation

Data I/O is the world's leading provider of manual and automated programming solutions for semiconductor (IC) devices. Data I/O's solutions, software and programming engine ensures devices are programmed correctly every time.

Redmond, Washington, USA

Manufacturer of Assembly Equipment

Attend the Ersa Versaflow 3 Level II Maintenance Training Course in April

Mar 05, 2015 | Kurtz Ersa North America, a leading supplier of electronics production equipment, today announced that it will hold a two-day ERSA Versaflow 3 Selective Soldering Level II Maintenance Training Course from April 6, 2015 at 1 p.m. – April 8, 2015 at 12 p.m. at its facility in Plymouth, WI. Students who attend the course will gain the knowledge and hands-on experience to maintain and troubleshoot issues on the Versaflow 3 machines.

kurtz ersa Corporation

ERSA Versaflow 3.

kurtz ersa Corporation

Manufacturer of Selective Soldering Systems, Ersascope BGA Inspection Systems, BGA Rework Systems, Soldering Irons, Wave Solder and Reflow Equipment.

Wertheim, Germany

Manufacturer of Assembly Equipment, Soldering

Metcal Announces Winner of Fourth Annual APEX Hand Soldering World Championship

Mar 05, 2015 | Metcal is pleased to announce that it has awarded the winner of the fourth annual IPC APEX EXPO® Hand Soldering World Championship with an MX-5210 Metcal Soldering System. Min Seok Kim, with Samsung Thales Co., Ltd., Korea, also was awarded $1,000 by the IPC.

Metcal

Min Seok Kim, Samsung Thales Co., Ltd., Korea, and Jerry Simmons, Metcal.

Metcal

Manufacturer of high-performance precision rework systems for the electronics bench. Product lines include: Hand Soldering and Desoldering, Convection Rework products, Fume Extraction and Fluid Dispensing tools.

Cypress, California, USA

Manufacturer of Assembly Equipment, Adhesives/Dispensing, Repair/Rework, Soldering

Epec Takes U.S. Manufacturing to the Cloud

Mar 04, 2015 | Epec Engineered Technologies, a leading provider of custom build-to-print products for all sectors of the electronics industry, has recently taken massive steps towards adopting a holistic cloud strategy.

Epec Engineered Technologies

Epec Engineered Technologies

Epec Engineered Technologies designs and manufactures custom, build to print products, for all sectors of the electronics industry. Our solutions provide a cost savings, technical resource and delivery advantage for our customers.

New Bedford, Massachusetts, USA

Manufacturer of Components, Manufacturer of Bare PCBs, Other, Design, Repair/Rework

SMTA and CALCE Announce New LED Assembly, Reliability, and Test Symposium

Mar 03, 2015 | The SMTA and CALCE are pleased to announce the new LED Assembly, Reliability, and Test (A.R.T.) Symposium will take place November 17 - 19, 2015 at the Crowne Plaza Midtown in Atlanta, GA.

Surface Mount Technology Association (SMTA)

Surface Mount Technology Association (SMTA)

The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.

Eden Prairie, Minnesota, USA

Association, Non-Profit, Training Provider, Events Organizer

2015 Cleaning Webinar Series Released by ZESTRON Americas

Mar 03, 2015 | ZESTRON is pleased to announce the release of the 2015 Cleaning Webinar Series schedule. ZESTRON Academy continues to educate production line operators, manufacturing and quality managers as well as process engineers by providing detailed industry knowledge and troubleshooting techniques through workshops, webinars, onsite training, as well as an extensive international technical library. The webinar topics will be presented by ZESTRON Americas’ accredited experts, Umut Tosun, M.S.Ch.E, Application Technology Manager, and Ravi Parthasarathy, M.S.Ch.E., Senior Process Engineer.

ZESTRON Americas

ZESTRON Americas

The globally leading provider of high precision cleaning products, services and training solutions in the electronics and semiconductor manufacturing industries.

Manassas, Virginia, USA

Cleaning, Test Services, Training Provider

Pickering Interfaces Expands Range of 16 Amp PXI Switching Solutions

Mar 03, 2015 | Pickering Interfaces is expanding its range of 16 Amp PXI switching solutions. Following the success of the 16 Amp uncommitted relay modules (model 40-161), the company is introducing new 16 Amp PXI module families.

Pickering Interfaces Ltd.

Pickering Interfaces Ltd.

Manufacturer of commercial and custom switching systems used in the electronics test market and for imbedded switch systems in OEM equipment.

Essex, United Kingdom

Manufacturer of Components

Nordson DAGE’s Peter Koch to Discuss Failure Analysis with X-ray at EPP’s Innovations Forum

Mar 03, 2015 | Nordson DAGE, a division of Nordson Corporation (NASDAQ: NDSN), announces that Peter Koch will present on the subject of “Failure Analysis with X-Ray – in 2D, Tomosynthesis and CT” at the EPP Innovations Forum, scheduled to take place on Thursday, March 12, 2015 at the Kongresshalle in Böblingen, Germany.

Nordson DAGE

Peter Koch

Nordson DAGE

The leading provider of award winning bond testing equipment and continues to invest significantly in research and development to remain at the cutting edge of bond tester technology.

Aylesbury. Buckinghamshire, United Kingdom

Inspection, Test Services

Count On Tools Inc. Introduces Cross-handle Screwdrivers with Lateral Drive from PB Swiss Tools

Mar 03, 2015 | Count On Tools now carries PB Swiss Tools’ Cross-handle Screwdriver. The ergonomic two-component cross-handle with a sheathing made of high-quality Santoprene® fits perfectly in the hand and allows fatigue-free working. The lateral drive ensures the required force transfer while tightening or loosening the screws.

Count On Tools, Inc.

PB Swiss Tools’ Cross-handle Screwdriver.

Count On Tools, Inc.

COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.

Gainesville, Georgia, USA

Manufacturer of Assembly Equipment, Manufacturer of Assembly Material, Pick and Place, Repair/Rework, Contract Manufacturer

Three Industry Volunteers Receive IPC President’s Award Awards Presented for Contributions to IPC and Electronics Industry

Mar 03, 2015 | In recognition of their significant contributions of time, talent and ongoing leadership in IPC and the electronics industry, three long-time IPC volunteers were presented with IPC President's Awards at IPC APEX EXPO® at the San Diego Convention Center in San Diego, Calif. The award recipients were: Kathy Johnston, Raytheon Missile Systems; Steve Martell, Sonoscan, Inc.; and Lee Wilmot, of TTM Technologies, Inc.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association, Non-Profit, Events Organizer

IPC Volunteers Honored for Contributions to Electronics Industry at IPC APEX EXPO

Mar 02, 2015 | IPC – Association Connecting Electronics Industries® presented Committee Leadership, Distinguished Committee Service and Special Recognition Awards at IPC APEX EXPO® at the San Diego Convention Center. The awards were presented to individuals who made significant contributions to IPC and the industry by lending their time and expertise through IPC committee service.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association, Non-Profit, Events Organizer

SMTA Announces International Conference on Soldering and Reliability (ICSR) Program

Mar 02, 2015 | The SMTA is pleased to announce the program for the 9th Annual International Conference on Soldering and Reliability being held May 19-21, 2015 in Markham, Ontario, Canada. The event will be co-located with the SMTA Toronto Expo.

Surface Mount Technology Association (SMTA)

Surface Mount Technology Association (SMTA)

The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.

Eden Prairie, Minnesota, USA

Association, Non-Profit, Training Provider, Events Organizer

Nordson YESTECH Accepts Second Consecutive Service Excellence Award

Mar 02, 2015 | Nordson YESTECH, a division of Nordson Corporation (NASDAQ: NDSN), is pleased to announce that it has received a 2015 Circuits Assembly Service Excellence Award (SEA) from Circuits Assembly in the Test and Inspection Equipment category. The company received the Service Excellence Award for its outstanding customer ratings.

Nordson YESTECH

Nordson YESTECH

Nordson YESTECH is a leading global provider of automated optical inspection and high-resolution x-ray inspection systems.

Carlsbad, California, USA

Inspection

VisionMaster Transforms Benchtop SPI with A600 Introduction at APEX

Mar 02, 2015 | PORTLAND, MAINE – VisionMaster® introduced the first member of the VisionMaster 600 family, the latest in the evolution of the original VisionMaster® world-class benchtop SPI systems at APEX. The fully-automatic A600 features the smallest 3D non-contact SPI sensor head in the world, which was crafted by miniaturizing the technology in the popular A500X. A smaller sensor translates to a more efficient motion system, lower vibrations and settling time – which results in higher accuracies at higher speeds. A600's fully automatic set-and-forget SPI system is optimal for monitoring and tweaking your solder paste printing process. The standard A600 handles larger board sizes – 18 in. x 16 in. – and is very economical at $29,999.

VisionMaster, Inc.

VisionMaster A600 - 3D Solder Paste Inspection System

VisionMaster, Inc.

VisionMaster is the original longtime manufacturer of advanced yet affordable 3-D solder paste inspection (SPI) equipment. VisionMaster provides best-in-class 3D white light technology and repeatability at laser technology prices.

Portland, Maine, USA

Inspection

Engineered Materials Systems Debuts Low-Cost Conductive Adhesive for Stringing or Shingling Solar Modules

Feb 28, 2015 | Engineered Materials Systems introduces its new DB-1541-S9 Low-Cost Conductive Adhesive for stringing or shingling applications in crystalline silicon and thin-film solar modules. DB-1541-S9 is designed to electrically interconnect solar cells using ribbons or direct cell to cell contact.

Engineered Materials Systems, Inc.

DB-1541-S9 Low-Cost Conductive Adhesive.

Engineered Materials Systems, Inc.

A global manufacturer of adhesives, conductives and encapsulants. For over 20 years, EMS has formulated state of the art acrylics, epoxies, silicones and urethanes.

Delaware, Ohio, USA

OEM

March 2015 “Sealed Bid” Online Auction

Feb 27, 2015 | Baja Bid will be selling some electronic manufacturing equipment from the Creation Technologies site in Lexington, KY. The bidding period opens on March 2nd and closes on March 18th.

Baja Bid

Baja Bid

BAJA Bid was founded to form an auction organization with the primary objective of providing an outstanding experience for both our buyers and sellers.

Odessa, Florida, USA

Equipment Auctions, Equipment Dealer / Broker

Count On Tools Inc. Now Carries PB Swiss Tools’ Expanded Rainbow SwissGrip Series

Feb 26, 2015 | Count On Tools now carries PB Swiss Tools’ SwissGrip Rainbow© Screwdrivers for Pozidriv screws. The new Rainbow© Series color-coding makes it easy to quickly locate, assign and apply the correct SwissGrip Screwdriver. The Pozidriv design is intended to decrease the likelihood that the screwdriver will slip out, provide a greater driving surface, and decrease wear when compared to the similar Phillips screw profile.

Count On Tools, Inc.

PB Swiss Tools’ SwissGrip Rainbow© Screwdrivers for Pozidriv screws.

Count On Tools, Inc.

COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.

Gainesville, Georgia, USA

Manufacturer of Assembly Equipment, Manufacturer of Assembly Material, Pick and Place, Repair/Rework, Contract Manufacturer

CISILE2012 Scanning Parts of Instruments Manufacturer

Feb 26, 2015 | Wisman High Voltage Power Supply Co.,Ltd. showed X-ray generator,DC high voltage power supply,and Modular high voltage power supply etc.It is understand that,The majority of XRF manufacturers all used Wisman X-ray generator. Moreover,Wisman Company can make HVPS customer in made as users demands.

Wisman High Voltage Power Supply Co.,LTD.

Wisman High Voltage Power Supply Co.,LTD.

Wisman High Voltage Power Supply Co.,Ltd, is the professional X-ray generator, DC high voltage power supply, PCB mount module and X-ray source manufacturers.

Xianyang, China

Manufacturer of Assembly Equipment

The Second Western Area Multinational Sourcing Fair

Feb 26, 2015 | The Second Western Area Multinational Sourcing Fair

Wisman High Voltage Power Supply Co.,LTD.

Wisman High Voltage Power Supply Co.,LTD.

Wisman High Voltage Power Supply Co.,Ltd, is the professional X-ray generator, DC high voltage power supply, PCB mount module and X-ray source manufacturers.

Xianyang, China

Manufacturer of Assembly Equipment

Wisman attend BCEIA Exhibition

Feb 26, 2015 | BCEIA is the biggest analysis instruments exhibiton for academic circles,Science research institute and many instrument manufacturers/Suppliers.

Wisman High Voltage Power Supply Co.,LTD.

Wisman High Voltage Power Supply Co.,LTD.

Wisman High Voltage Power Supply Co.,Ltd, is the professional X-ray generator, DC high voltage power supply, PCB mount module and X-ray source manufacturers.

Xianyang, China

Manufacturer of Assembly Equipment

ACCSI2014 Annual Conference of China Scientific Instruments

Feb 26, 2015 | Wisman is about to attend ACCSI2014 Annual Conference of China Scientific Instruments on Next Friday(2014/04/18) .

Wisman High Voltage Power Supply Co.,LTD.

Wisman High Voltage Power Supply Co.,LTD.

Wisman High Voltage Power Supply Co.,Ltd, is the professional X-ray generator, DC high voltage power supply, PCB mount module and X-ray source manufacturers.

Xianyang, China

Manufacturer of Assembly Equipment

About Panalytical Venus200 X-ray generator Repair

Feb 26, 2015 | Wisman High Voltage Power Supply Co., Ltd was more than once successfully repaired many X-ray generators of XRF Venus200/Venus100 which is producted by Holland Panalytical(formerly Holland Philips analytical)

Wisman High Voltage Power Supply Co.,LTD.

Wisman High Voltage Power Supply Co.,LTD.

Wisman High Voltage Power Supply Co.,Ltd, is the professional X-ray generator, DC high voltage power supply, PCB mount module and X-ray source manufacturers.

Xianyang, China

Manufacturer of Assembly Equipment

About Panalytical Axios X-ray generator Repair

Feb 26, 2015 | Wisman High Voltage Power Supply Co., Ltd was more than once successfully repaired many X-ray generators of the high performance WDXRF Axios which is manufactured by Holland Panalytical(formerly Holland Philips analytical).

Wisman High Voltage Power Supply Co.,LTD.

Wisman High Voltage Power Supply Co.,LTD.

Wisman High Voltage Power Supply Co.,Ltd, is the professional X-ray generator, DC high voltage power supply, PCB mount module and X-ray source manufacturers.

Xianyang, China

Manufacturer of Assembly Equipment

JOT G3 with Tau enables 100% test coverage of Android devices for operators

Feb 25, 2015 | JOT Automation introduce an automated test solution for operators enabling a full system test coverage of all types of Android devices. JOT G3 with Profilence Tau speeds up the time-to-market and cuts total costs by testing the entire device in a reliable and repeatable environment.

JOT Automation, Inc.

JOT Automation, Inc.

We develop test and production solutions for smart products, components and electronics. We are global partner for several industry leading companies including telecom, automotive and life science industries.

Irving, Texas, USA

Manufacturer of Assembly Equipment

IPC Honors Honeywell and Plexus Corp. with Corporate Recognition Awards

Feb 25, 2015 | IPC – Association Connecting Electronics Industries® bestowed its highest corporate honors to Plexus Corp. and Honeywell. During a luncheon at IPC APEX EXPO®, the IPC Stan Plzak Corporate Recognition Award was presented to Plexus Corp. and the IPC Peter Sarmanian Corporate Recognition Award to Honeywell.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association, Non-Profit, Events Organizer

IPC Elects Six Members to Board of Directors

Feb 25, 2015 | The Nominating and Governance Committee of the IPC Board of Directors presented six candidates for election at the IPC Annual Meeting today, held in conjunction with IPC APEX EXPO 2015 at the San Diego Convention Center. Three candidates were selected for term renewal and three were elected as first-time directors. All six Board members will serve a four-year term.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association, Non-Profit, Events Organizer

ACD Proves Commitment to Customer Service with Fourth Service Excellence Award

Feb 25, 2015 | ACD announces that it received a 2015 Service Excellence Award (SEA) from Circuits Assembly in the EMS provider category.

Automated Circuit Design (ACD)

Automated Circuit Design (ACD)

An EMS provider offering the whole package from concept to delivery. We take you from schematic to the design, fabrication, domestic and offshore assembly, final test, box build and even the logistics

Richardson, Texas, USA

Manufacturer of Assembled PCBs, Assembly, Design, Test Services, Contract Manufacturer

KIC Accepts Its Fifth Service Excellence Award during APEX

Feb 25, 2015 | KIC is pleased to announce that it received 2015 Circuits Assembly Service Excellence Award (SEA) from Circuits Assembly in the Soldering Equipment category. The company was selected for the Service Excellence Award as a result of its outstanding customer ratings, as judged by its own customers. This marks KIC’s fifth Service Excellence Award.

KIC Thermal

KIC Thermal

KIC's provides products and services designed to improve a variety of thermal monitoring, profiling and process control applications.

San Diego, California, USA

Software Manufacturer

Europlacer Picks up Another Service Excellence Award for Pick-and-Place

Feb 25, 2015 | Europlacer announces that it has been awarded a 2015 Circuits Assembly Service Excellence Award in the category of Pick-and-Place Equipment for its outstanding customer service, as judged by its own customers.

EUROPLACER

EUROPLACER

Europlacer designs and manufactures a comprehensive range of highly flexible SMT pick and place equipment for the global electronics industry, with a network of distributors across the globe.

Poole Dorset, United Kingdom

Manufacturer of Assembly Equipment, Pick and Place

MIRTEC Receives Fourth Service Excellence Award from Its Customers at APEX 2015

Feb 25, 2015 | MIRTEC, “The Global Leader in Inspection Technology,” was awarded a 2015 Circuits Assembly Service Excellence Award in the category of Test & Inspection for its outstanding customer ratings, as judged by its own customers.

MIRTEC Corporation

MIRTEC Corporation

Global supplier of Automated Optical Inspection and Solder Paste Inspection Systems to the Electronics Manufacturing Industry.

Oxford, Connecticut, USA

Inspection

Count On Tools Wins a Service Excellence Award for the Second Consecutive Year

Feb 25, 2015 | Count On Tools Inc. (COT) announces that it has been awarded a 2015 Circuits Assembly Service Excellence Award for its outstanding customer ratings, as judged by its own customers. Count On Tools was selected for the Automation and Handling Equipment category.

Count On Tools, Inc.

Count On Tools, Inc.

COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.

Gainesville, Georgia, USA

Manufacturer of Assembly Equipment, Manufacturer of Assembly Material, Pick and Place, Repair/Rework, Contract Manufacturer

KYZEN Receives Ninth Service Excellence Award

Feb 25, 2015 | KYZEN announced today that it has been honored with the 2015 Circuits Assembly Service Excellence Award in the category of Cleaning/Processing for its outstanding customer ratings, as judged by its own customers. This marks KYZEN’s ninth (9th) Circuits Assembly Service Excellence Award based on customer ratings.

KYZEN Corporation

KYZEN Corporation

A leading supplier of precision cleaning chemistries to the worldwide electronics, metal finishing, medical, semiconductor, and optical industries.

Nashville, Tennessee, USA

Cleaning

  • SMTnet
  • »
  • SMT, PCB Electronics Industry News
How FactoryLogix Helped Sparton Corp. Achieve Regulatory Compliance

Facility Closure